testbeds_cti.tmpl.html

<div class="container">
    <div class="row">
        <div class="col-md-8">
            <h3>
                <small>Testbeds</small>
                <br/>Computer Technology Institute &amp; Press (CTI)
            </h3>
        </div>
    </div>
    <div class="row">
        <div class="col-md-8">

            <div class="alert alert-warning" role="alert">
                Please note that the WISEBED project ended in May 2011. Some but not all of the testbeds are still
                operational and some but not all of the software solutions are still being developed. The information
                below might therefore be outdated. For more up-to-date information on this testbed please contact the
                responsible <a href="#about_partners">project partner</a>.
            </div>

            <h4>Overview</h4>

            <p>
                The local WISEBED testbed at the Computer Technology Institute &amp; Press "Diophantus" (CTI) is located
                in the office room at the <a href="http://www.cti.gr/en/">CTI</a> ( Maritsa's building 0. floor). The
                testbed consists of 154 nodes of two different kinds (iSense and TelosB ) in 8 rooms.
            </p>

            <p>
                The CTI testbed consists of the following sensor nodes:
            </p>

            <ul>
                <li>iSense by <a href="http://www.coalesenses.com/" target="_blank">coalesenses</a><br/>
                    <ul>
                        <li>Jennic 32 bit microprocessor (JN5139R1)</li>
                        <li>802.15.4 radio interface</li>
                        <li>Fixed Power Supply via USB Interface</li>
                        <li>Half of the nodes are equipped with temperature and light sensors</li>
                        <li>the other half with a PIR and an accelerometer</li>
                    </ul>
                </li>
                <li>TelosB by <a href="http://www.xbow.com/" target="_blank">Crossbow</a> (now <a
                        href="http://www.willow.co.uk/html/telosb_mote_platform.html" target="_blank">willow</a>)<br>
                    <ul>
                        <li>Texas Instruments 16 bit microprocessor (TI MSP 430)</li>
                        <li>802.15.4 radio interface</li>
                        <li>Fixed Power Supply via the USB Interface</li>
                        <li>Temperature, humidity and light sensor</li>
                        <li>1 MB external flash</li>
                    </ul>
                </li>
            </ul>

        </div>
    </div>
    <div class="row">
        <div class="col-md-4">
            <img src="img/testbed-cti-1.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            An Arduino that is Controlling the a lamp in the kitchen. This Arduino can be controlled using the Testbed
            Nodesto switch lights on and off automatically when someone enters the room.
        </div>
        <div class="col-md-4">
            <img src="img/testbed-cti-2.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            Closest look of the arduino.
        </div>
    </div>
    <div class="row">
        <div class="col-md-4">
            <img src="img/testbed-cti-3.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            The lamp the Arduino is connected to, and the iSense that controlls it (lower left corner).
        </div>
        <div class="col-md-4">
            <img src="img/testbed-cti-4.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            An iSense and a TelosB node placed on the wall. The iSense is using an Environmental. The TelosB is inside a
            plastic Case.
        </div>
    </div>
    <div class="row">
        <div class="col-md-4">
            <img src="img/testbed-cti-5.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            iSense Node with External Antenna placed on a Window equiped with an Environmental Module. The iSense is
            placed on the Window to increase communication Range.
        </div>
        <div class="col-md-4">
            <img src="img/testbed-cti-6.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            An iSense and a TelosB node placed on the wall. The iSense is using an Environmental and a Security Module.
        </div>
    </div>
    <div class="row">
        <div class="col-md-4">
            <img src="img/testbed-cti-7.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            An iSense and a TelosB node placed on the wall. The iSense is using an Environmental and a Security Module.
        </div>
        <div class="col-md-4">
            <img src="img/testbed-cti-8.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            iSense node Placed on a Window with a Security and an Environmental Module.
        </div>
    </div>
    <div class="row">
        <div class="col-md-4">
            <img src="img/testbed-cti-9.jpg" width="300" height="225" class="img-rounded img-bordered"/>
            Detail view of the window node.
        </div>
        <div class="col-md-4">
            <h5>More information</h5>
            <ul>
                <li><a href="http://150.140.5.11/testbed/floor0.png" target="_blank">Map of the nodes on floor 0</a>
                </li>
                <li><a href="http://150.140.5.11/testbed/floor2.png" target="_blank">Map of the nodes on floor 2</a>
                </li>
                <li><a href="http://150.140.5.11/testbed/floor3.png" target="_blank">Map of the nodes on floor 3</a>
                </li>
            </ul>
        </div>
    </div>
    <div class="row">
        <div class="col-md-8">
            <h3>Client Configuration</h3>

            <h4>WiseGui Web Frontend</h4>

            <p>
                You can directly interact with our testbed using the <a href="#tools_web">WiseGui</a>-based Web
                frontend:
                <a href="http://wisebed.itm.uni-luebeck.de/">http://wisebed.itm.uni-luebeck.de/</a>.
            </p>

            <h4>SOAP API v2.3 Web Service Endpoints</h4>

            <p>
                If you are using our SOAP API (e.g. by using the older
                <a href="#tools_desktop">Experimentation Scripts</a> scripting client or writing a custom client) you'll
                need the endpoint URLs listed below:
            </p>

            <table class="table table-condensed">
                <tbody>
                <tr>
                    <td align="right"><b>Testbed URN Prefix</b></td>
                    <td><code>urn:wisebed:ctitestbed:</code></td>
                    <td>&nbsp;</td>
                </tr>
                <tr>
                    <td align="right"><b>SNAA</b></td>
                    <td><a href="http://hercules.cti.gr:8890/snaa/shib1">http://hercules.cti.gr:8890/snaa/shib1</a>
                    </td>
                    <td><a href="http://hercules.cti.gr:8890/snaa/shib1?wsdl">WSDL</a></td>
                </tr>
                <tr>
                    <td align="right"><b>RS</b></td>
                    <td><a href="http://hercules.cti.gr:8888/rs/rs">http://hercules.cti.gr:8888/rs</a>
                    </td>
                    <td><a href="http://hercules.cti.gr:8888/rs/rs?wsdl">WSDL</a></td>
                </tr>
                <tr>
                    <td align="right"><b>SM</b></td>
                    <td><a href="http://hercules.cti.gr:8888/sessions">http://hercules.cti.gr:8888/sessions</a>
                    </td>
                    <td><a href="http://hercules.cti.gr:8888/sessions?wsdl">WSDL</a></td>
                </tr>
                </tbody>
            </table>
        </div>
    </div>
</div>