diff --git a/Source/HBIOS/Config/RCZ180_z1rcc_std.asm b/Source/HBIOS/Config/RCZ180_z1rcc_std.asm
index 05f7151e..f616bae9 100644
--- a/Source/HBIOS/Config/RCZ180_z1rcc_std.asm
+++ b/Source/HBIOS/Config/RCZ180_z1rcc_std.asm
@@ -49,6 +49,10 @@
 ;
 #INCLUDE "cfg_RCZ180.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
 ;
 RAMSIZE		.SET	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
@@ -61,12 +65,15 @@ Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
 DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -94,8 +101,18 @@ SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
 AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
diff --git a/Source/HBIOS/Config/RCZ280_ext_std.asm b/Source/HBIOS/Config/RCZ280_ext_std.asm
index 0386a952..4c0630ed 100644
--- a/Source/HBIOS/Config/RCZ280_ext_std.asm
+++ b/Source/HBIOS/Config/RCZ280_ext_std.asm
@@ -47,6 +47,10 @@
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	1		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -56,11 +60,18 @@ Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
 Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -74,16 +85,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
 AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
diff --git a/Source/HBIOS/Config/RCZ280_nat_std.asm b/Source/HBIOS/Config/RCZ280_nat_std.asm
index ea8dad59..37b20a77 100644
--- a/Source/HBIOS/Config/RCZ280_nat_std.asm
+++ b/Source/HBIOS/Config/RCZ280_nat_std.asm
@@ -47,6 +47,10 @@
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -56,11 +60,18 @@ Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
 Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
@@ -74,16 +85,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
 AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
diff --git a/Source/HBIOS/Config/RCZ280_zz80mb_std.asm b/Source/HBIOS/Config/RCZ280_zz80mb_std.asm
index b56ce112..85b3e35f 100644
--- a/Source/HBIOS/Config/RCZ280_zz80mb_std.asm
+++ b/Source/HBIOS/Config/RCZ280_zz80mb_std.asm
@@ -49,6 +49,10 @@
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
 CPUOSC		.SET	24000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	3		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 ;
@@ -59,11 +63,18 @@ Z280_MEMLOWAIT	.SET	0		; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
 Z280_MEMHIWAIT	.SET	0		; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
 Z280_IOWAIT	.SET	1		; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
 Z280_INTWAIT	.SET	0		; Z280: INT ACK WAIT STATUS (0-3)
+;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;
+DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+INTRTCENABLE	.SET	TRUE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 Z2UENABLE	.SET	TRUE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
 Z2U0HFC		.SET	TRUE		; Z2U 0: ENABLE HARDWARE FLOW CONTROL
@@ -78,16 +89,29 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 ;
+CHENABLE	.SET	TRUE		; CH: ENABLE CH375/376 USB SUPPORT
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+;
+LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
+;
+PPAENABLE	.SET	FALSE		; PPA: ENABLE IOMEGA ZIP DRIVE (PPA) DISK DRIVER (PPA.ASM)
+IMMENABLE	.SET	FALSE		; IMM: ENABLE IOMEGA ZIP PLUS DRIVE (IMM) DISK DRIVER (IMM.ASM)
+SYQENABLE	.SET	FALSE		; SYQ: ENABLE SYQUEST SPARQ DISK DRIVER (SYQ.ASM)
+;
 SN76489ENABLE	.SET	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
+;
 AY38910ENABLE	.SET	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
 AY_FORCE	.SET	FALSE		; AY: BYPASS AUTO-DETECT, FORCED PRESENT
diff --git a/Source/HBIOS/Config/RCZ80_easy_std.asm b/Source/HBIOS/Config/RCZ80_easy_std.asm
index 333e441e..89d7513b 100644
--- a/Source/HBIOS/Config/RCZ80_easy_std.asm
+++ b/Source/HBIOS/Config/RCZ80_easy_std.asm
@@ -56,12 +56,12 @@ AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
 ;
 CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
 INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
 CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
 CTCTIMER	.SET	TRUE		; ENABLE CTC PERIODIC TIMER
 CTCMODE		.SET	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
 CTCOSC		.SET	921600		; CTC CLOCK FREQUENCY
+WDOGMODE	.SET	WDOG_EZZ80	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
diff --git a/Source/HBIOS/Config/RCZ80_skz_std.asm b/Source/HBIOS/Config/RCZ80_skz_std.asm
index 84776410..1e539a39 100644
--- a/Source/HBIOS/Config/RCZ80_skz_std.asm
+++ b/Source/HBIOS/Config/RCZ80_skz_std.asm
@@ -53,12 +53,16 @@ AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
 ;
 CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
 ;
+KIOENABLE	.SET	FALSE		; ENABLE ZILOG KIO SUPPORT
+CTCENABLE	.SET	FALSE		; ENABLE ZILOG CTC SUPPORT
+;
 SKZENABLE	.SET	TRUE		; ENABLE SERGEY'S Z80-512K FEATURES
 SKZDIV		.SET	DIV_12		; UART CLK (CLK2) DIVIDER FOR Z80-512K
 WDOGMODE	.SET	WDOG_SKZ	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
 FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 LEDENABLE	.SET	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDPORT		.SET	$6E		; STATUS LED PORT ADDRESS
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
diff --git a/Source/HBIOS/vrc.asm b/Source/HBIOS/vrc.asm
index 98b12a59..22338298 100644
--- a/Source/HBIOS/vrc.asm
+++ b/Source/HBIOS/vrc.asm
@@ -70,7 +70,7 @@ VRC_INIT1:
 	; HARDWARE INITIALIZATION
 	CALL 	VRC_CRTINIT		; SETUP THE VGARC CHIP REGISTERS
 	CALL	VRC_LOADFONT		; LOAD FONT DATA FROM ROM TO VGARC STORAGE
-	CALL	VRC_VDARES		; RESET
+	CALL	VRC_VDAINI		; RESET
 	CALL	KBD_INIT		; INITIALIZE KEYBOARD DRIVER
 
 	; ADD OURSELVES TO VDA DISPATCH TABLE