Help to install dsniff and/or arpspoof on Pineapple cloner

[blackrosevn]

Hello there,

I would like to ask if someone can help and guide me how to install the arpspoof and/or dsniff on the Pineapple cloner.

I did try and find on the internet but could not find a way.

Here is the error message:

**Unknown package 'arpspoof'.
Collected errors:

• opkg_install_cmd: Cannot install package arpspoof**

Thanks

[xchwarze]

If you run opkg update before and it doesn't install them, then they are not in any of the download repos.
If so you have to find the apk and install it manually.

[blackrosevn]

I have 2 routers: one is with mips_24kc, and they are in default repos to install. But the other one with mipsel_24kc (Xiaomi R3G), they do not have in the repos, even I have been trying to find a lot of time on Google, but it seems nothing for this mipsel_24k.

Can you help to include an ipk in the repos or show me a link to download that ipk?

Thanks

[xchwarze]

Package: dsniff
Version: 2.4b1-2
Depends: libc, libpcap1, libnids, libnet0, libopenssl1.1, libgdbm, libtirpc
Source: extra_feeds/community/network/dsniff
SourceName: dsniff
Section: net
Architecture: mips_24kc
Installed-Size: 57039
Description:  A collection of tools for network auditing and penetration testing.

Package: arpspoof
Version: 2.4b1-2
Depends: libc, libpcap1, libnids, libnet0, libopenssl1.1, libgdbm, libtirpc
Source: extra_feeds/community/network/dsniff
SourceName: arpspoof
Section: net
Architecture: mips_24kc
Installed-Size: 2758
Description:  Arpspoof package.

None of them mention who maintains them, so I guess they were compiled by hak5.
At worst you would have to find the sources and compile it for openwrt 19.

[blackrosevn]

After searching I realised that the Devices I have are mipsel_24kc without repos support for dsniff and arpspoof (what you shared is for mips_24kc).

So I bought a Mikrotik RB951G-2HND - mips_24kc, then I am going to build the cloner firmware for this device. But it seems my device is not yet added to your support code.

Could you please guide me how build with the sample command "tools/builder.sh mips universal imagebuilder/19.07.7-ar71xx-generic gl-ar750s" => Which code for my device instead of gl-ar750s?

[blackrosevn]

Can anyone help me to find a cloner pineapple firmware for Mikrotik RB951G-2HND? Or how to build it from the cloner git? I could not find a way neither.

I did search in the target list but there is nothing relating to the Mikrotik RB951G-2HND.

And I am already done with Openwrt running on the device. Just one more step to make it to be pineapple.

So please check and help.

Thanks!

[xchwarze]

I checked and it's not in the "generic" variant because apparently it's a separate variant.
https://mirror-01.infra.openwrt.org/releases/19.07.7/targets/ar71xx/

You should add that new variant in the supported variant array, its name would be "ar71xx-mikrotik"
https://github.com/xchwarze/wifi-pineapple-cloner/blob/master/tools/dependencies-install.sh#L7

And the profile name should be vmlinux (I haven't downloaded that imagebuilder, if you want to attach what make info returns so I can see what values are there).
Remember to follow the steps in the OpenWrt manual and convert the router to the OpenWrt platform first: https://openwrt.org/toh/mikrotik/rb951g_2hnd

[blackrosevn]

Thank you @xchwarze !

I finally can generate the firmware for my device following your comments.

[xchwarze]

@blackrosevn whats is the profile name? vmlinux?

[blackrosevn]

I chose nand-large as my device has 128MB flash.