Wall Mounted Cube immersed into the Atmospheric Boundary Layer #238
-
|
Hi all, I am trying to run a LES for a Wall mounted cube immersed into the ABL with a precursor simulation providing the appropriate turbulent inflow. For the cube's geometry, I used the xcompact-tooblox and the genepsi tool but the ABL parameters are not available in the native python package. Do you have any suggestion on how to proceed ? If i used the toolbox, can I nevertheless impose the conditions into a separated input.i3d file and the solver will understand that there are an input file and a geometry folder ? Or should I create the geometry with another tool? Thanks in advance ! |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
Hi, The toolbox is not yet compatible with ABL capabilities. My suggestion would be to hard code the geometry (similar to how it is done for a cylinder. I shall also say that it is likely that you would need a wall model at the walls of your immersed cube. This is something we are working on at the moment, and will hopefully be a new functionality available soonish (it is probably going to take few months). Best, Sylvain |
Beta Was this translation helpful? Give feedback.
Hi,
The toolbox is not yet compatible with ABL capabilities. My suggestion would be to hard code the geometry (similar to how it is done for a cylinder.
I shall also say that it is likely that you would need a wall model at the walls of your immersed cube. This is something we are working on at the moment, and will hopefully be a new functionality available soonish (it is probably going to take few months).
Best,
Sylvain