diff --git a/lldb/docs/use/aarch64-linux.rst b/lldb/docs/use/aarch64-linux.md similarity index 61% rename from lldb/docs/use/aarch64-linux.rst rename to lldb/docs/use/aarch64-linux.md index c790d9d369a480..803f56d16f981e 100644 --- a/lldb/docs/use/aarch64-linux.rst +++ b/lldb/docs/use/aarch64-linux.md @@ -1,5 +1,4 @@ -Using LLDB On AArch64 Linux -=========================== +# Using LLDB On AArch64 Linux This page explains the details of debugging certain AArch64 extensions using LLDB. If something is not mentioned here, it likely works as you would expect. @@ -8,23 +7,21 @@ This is not a replacement for ptrace and Linux Kernel documentation. This covers how LLDB has chosen to use those things and how that effects your experience as a user. -Scalable Vector Extension (SVE) -------------------------------- +## Scalable Vector Extension (SVE) -See `here `__ -to learn about the extension and `here `__ +See [here](https://developer.arm.com/Architectures/Scalable%20Vector%20Extensions) +to learn about the extension and [here](https://kernel.org/doc/html/latest/arch/arm64/sve.html) for the Linux Kernel's handling of it. In LLDB you will be able to see the following new registers: -* ``z0-z31`` vector registers, each one has size equal to the vector length. -* ``p0-p15`` predicate registers, each one containing 1 bit per byte in the vector +* `z0-z31` vector registers, each one has size equal to the vector length. +* `p0-p15` predicate registers, each one containing 1 bit per byte in the vector length. Making each one vector length / 8 sized. -* ``ffr`` the first fault register, same size as a predicate register. -* ``vg``, the vector length in "granules". Each granule is 8 bytes. - -.. code-block:: +* `ffr` the first fault register, same size as a predicate register. +* `vg`, the vector length in "granules". Each granule is 8 bytes. +``` Scalable Vector Extension Registers: vg = 0x0000000000000002 z0 = {0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 <...> } @@ -32,19 +29,19 @@ In LLDB you will be able to see the following new registers: p0 = {0xff 0xff} <...> ffr = {0xff 0xff} +``` The example above has a vector length of 16 bytes. Within LLDB you will always -see "vg" as in the ``vg`` register, which is 2 in this case (8*2 = 16). +see "vg" as in the `vg` register, which is 2 in this case (8*2 = 16). Elsewhere in kernel code or applications, you may see "vq" which is the vector length in quadwords (16 bytes). Where you see "vl", it is in bytes. -While you can count the size of a P or Z register, it is intended that ``vg`` be +While you can count the size of a P or Z register, it is intended that `vg` be used to find the current vector length. -Changing the Vector Length -.......................... +### Changing the Vector Length -The ``vg`` register can be written during a debug session. Writing the current +The `vg` register can be written during a debug session. Writing the current vector length changes nothing. If you increase the vector length, the registers will likely be reset to 0. If you decrease it, LLDB will truncate the Z registers but everything else will be reset to 0. @@ -54,21 +51,20 @@ way the same as it was previously. Whether that is done from within the debuggee, or by LLDB. If you need to change the vector length, do so before a function's first use of SVE. -Z Register Presentation -....................... +### Z Register Presentation LLDB makes no attempt to predict how SVE Z registers will be used. Since LLDB does not know what sort of elements future instructions will interpret the register as. It therefore does not change the visualisation of the register and always defaults to showing a vector of byte sized elements. -If you know what format you are going to use, give a format option:: - +If you know what format you are going to use, give a format option: +``` (lldb) register read z0 -f uint32_t[] z0 = {0x01010101 0x01010101 0x01010101 0x01010101} +``` -FPSIMD and SVE Modes -.................... +### FPSIMD and SVE Modes Prior to the debugee's first use of SVE, it is in what the Linux Kernel terms SIMD mode. Only the FPU is being used. In this state LLDB will still show the @@ -82,18 +78,16 @@ You can also trigger this with LLDB by writing to an SVE register. Note that there is no way to undo this change from within LLDB. However, the debugee itself could do something to end up back in SIMD mode. -Expression evaluation -..................... +### Expression evaluation If you evaluate an expression, all SVE state is saved prior to, and restored after the expression has been evaluated. Including the register values and vector length. -Scalable Matrix Extension (SME) -------------------------------- +## Scalable Matrix Extension (SME) -See `here `__ -to learn about the extension and `here `__ +See [here](https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/scalable-matrix-extension-armv9-a-architecture) +to learn about the extension and [here](https://kernel.org/doc/html/latest/arch/arm64/sme.html) for the Linux Kernel's handling of it. SME adds a "Streaming Mode" to SVE, and this mode has its own vector length @@ -101,37 +95,38 @@ known as the "Streaming Vector Length". In LLDB you will see the following new registers: -* ``tpidr2``, an extra per thread pointer reserved for use by the SME ABI. +* `tpidr2`, an extra per thread pointer reserved for use by the SME ABI. This is not scalable, just pointer sized aka 64 bit. -* ``z0-z31`` streaming SVE registers. These have the same names as the +* `z0-z31` streaming SVE registers. These have the same names as the non-streaming registers and therefore you will only see the active set in LLDB. You cannot read or write the inactive mode's registers. Their size is the same as the streaming vector length. -* ``za`` the Array Storage register. The "Matrix" part of "Scalable Matrix +* `za` the Array Storage register. The "Matrix" part of "Scalable Matrix Extension". This is a square made up of rows of length equal to the streaming vector length (svl). Meaning that the total size is svl * svl. -* ``svcr`` the Streaming Vector Control Register. This is actually a pseduo - register but it matches the content of the architecturaly defined ``SVCR``. +* `svcr` the Streaming Vector Control Register. This is actually a pseduo + register but it matches the content of the architecturaly defined `SVCR`. This is the register you should use to check whether streaming mode and/or - ``za`` is active. This register is read only. -* ``svg`` the streaming vector length in granules. This value is not connected + `za` is active. This register is read only. +* `svg` the streaming vector length in granules. This value is not connected to the vector length of non-streaming mode and may change independently. This register is read only. -.. note:: - While in non-streaming mode, the ``vg`` register shows the non-streaming - vector length, and the ``svg`` register shows the streaming vector length. - When in streaming mode, both ``vg`` and ``svg`` show the streaming mode vector +```{note} + While in non-streaming mode, the `vg` register shows the non-streaming + vector length, and the `svg` register shows the streaming vector length. + When in streaming mode, both `vg` and `svg` show the streaming mode vector length. Therefore it is not possible at this time to read the non-streaming vector length within LLDB, while in streaming mode. This is a limitation of the LLDB implementation not the architecture, which stores both lengths independently. +``` In the example below, the streaming vector length is 16 bytes and we are in -streaming mode. Note that bits 0 and 1 of ``svcr`` are set, indicating that we -are in streaming mode and ZA is active. ``vg`` and ``svg`` report the same value -as ``vg`` is showing the streaming mode vector length:: - +streaming mode. Note that bits 0 and 1 of `svcr` are set, indicating that we +are in streaming mode and ZA is active. `vg` and `svg` report the same value +as `vg` is showing the streaming mode vector length: +``` Scalable Vector Extension Registers: vg = 0x0000000000000002 z0 = {0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 <...> } @@ -150,11 +145,11 @@ as ``vg`` is showing the streaming mode vector length:: svg = 0x0000000000000002 svcr = 0x0000000000000003 za = {0x00 <...> 0x00} +``` -Changing the Streaming Vector Length -.................................... +### Changing the Streaming Vector Length -To reduce complexity for LLDB, ``svg`` is read only. This means that you can +To reduce complexity for LLDB, `svg` is read only. This means that you can only change the streaming vector length using LLDB when the debugee is in streaming mode. @@ -162,80 +157,75 @@ As for non-streaming SVE, doing so will essentially make the content of the SVE registers undefined. It will also disable ZA, which follows what the Linux Kernel does. -Visibility of an Inactive ZA Register -..................................... +### Visibility of an Inactive ZA Register LLDB does not handle registers that can come and go at runtime (SVE changes -size but it does not dissappear). Therefore when ``za`` is not enabled, LLDB +size but it does not dissappear). Therefore when `za` is not enabled, LLDB will return a block of 0s instead. This block will match the expected size of -``za``:: - +`za`: +``` (lldb) register read za svg svcr za = {0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 <...> } svg = 0x0000000000000002 svcr = 0x0000000000000001 +``` -Note that ``svcr`` bit 2 is not set, meaning ``za`` is inactive. +Note that `svcr` bit 2 is not set, meaning `za` is inactive. -If you were to write to ``za`` from LLDB, ``za`` will be made active. There is +If you were to write to `za` from LLDB, `za` will be made active. There is no way from within LLDB to reverse this change. As for changing the vector -length, the debugee could still do something that would disable ``za`` again. +length, the debugee could still do something that would disable `za` again. -If you want to know whether ``za`` is active or not, refer to bit 2 of the -``svcr`` register, otherwise known as ``SVCR.ZA``. +If you want to know whether `za` is active or not, refer to bit 2 of the +`svcr` register, otherwise known as `SVCR.ZA`. -ZA Register Presentation -........................ +### ZA Register Presentation -As for SVE, LLDB does not know how the debugee will use ``za``, and therefore +As for SVE, LLDB does not know how the debugee will use `za`, and therefore does not know how it would be best to display it. At any time any given instrucion could interpret its contents as many kinds and sizes of data. -So LLDB will default to showing ``za`` as one large vector of individual bytes. +So LLDB will default to showing `za` as one large vector of individual bytes. You can override this with a format option (see the SVE example above). -Expression Evaluation -..................... +### Expression Evaluation The mode (streaming or non-streaming), streaming vector length and ZA state will be restored after expression evaluation. On top of all the things saved for SVE in general. -Scalable Matrix Extension (SME2) --------------------------------- +## Scalable Matrix Extension (SME2) The Scalable Matrix Extension 2 is documented in the same architecture specification as SME, and covered by the same kernel documentation page as SME. -SME2 adds 1 new register, ``zt0``. This register is a fixed size 512 bit +SME2 adds 1 new register, `zt0`. This register is a fixed size 512 bit register that is used by new instructions added in SME2. It is shown in LLDB in the existing SME register set. -``zt0`` can be active or inactive, as ``za`` can. The same ``SVCR.ZA`` bit -controls this. An inactive ``zt0`` is shown as 0s, like ``za`` is. Though in -``zt0``'s case, LLDB does not need to fake the value. Ptrace already returns a -block of 0s for an inactive ``zt0``. +`zt0` can be active or inactive, as `za` can. The same `SVCR.ZA` bit +controls this. An inactive `zt0` is shown as 0s, like `za` is. Though in +`zt0`'s case, LLDB does not need to fake the value. Ptrace already returns a +block of 0s for an inactive `zt0`. -Like ``za``, writing to an inactive ``zt0`` will enable it and ``za``. This can -be done from within LLDB. If the write is instead to ``za``, ``zt0`` becomes +Like `za`, writing to an inactive `zt0` will enable it and `za`. This can +be done from within LLDB. If the write is instead to `za`, `zt0` becomes active but with a value of all 0s. -Since ``svcr`` is read only, there is no way at this time to deactivate the +Since `svcr` is read only, there is no way at this time to deactivate the registers from within LLDB (though of course a running process can still do this). -To check whether ``zt0`` is active, refer to ``SVCR.ZA`` and not to the value of -``zt0``. +To check whether `zt0` is active, refer to `SVCR.ZA` and not to the value of +`zt0`. -ZT0 Register Presentation -......................... +### ZT0 Register Presentation -As for ``za``, the meaning of ``zt0`` depends on the instructions used with it, +As for `za`, the meaning of `zt0` depends on the instructions used with it, so LLDB does not attempt to guess this and defaults to showing it as a vector of bytes. -Expression Evaluation -..................... +### Expression Evaluation -``zt0``'s value and whether it is active or not will be saved prior to +`zt0`'s value and whether it is active or not will be saved prior to expression evaluation and restored afterwards. \ No newline at end of file