ZigUNO is a development board for creating DIY Zigbee devices based on Ebyte E18-MS1 module (CC2530)
Physically, the board is compatible with all shields of the Uno form factor. Finally you can use countless old Arduino shields 🤣
As a firmware, it is proposed to use:
- Zigbee configurable firmware PTVO 🚀
- Develop your own using ZigUP or one of the various DIYRuZ projects as examples
- A beginner's guide to using PTVO is available on Habr (in russian)
- A beginner's guide to developing your own Zigbee firmware is available on Habr (in russian)
- A complete guide showing how to install IAR to start developing your own firmware is available on ZigDevWiki
Version 1.5 differences:
- Type C instead of micro usb, keeping up with the times 🤩
- The 8-pin connector has been replaced with a 6-pin connector. the last two are not connected and only interfere with some sub-boards 🤦♂️
- Rearranged components on the board 🙃
- Added designations of pin capabilities directly to the board to make it even more convenient for you 🥳
- Slightly changed the graphics on the board, as a sign of support for Ukraine 🇺🇦
Scheme is the same. Gerber files will be uploaded after the tests. Photo too.
|
|
|
|
ZigUNO is licensed under the
