dvbsdr is an integration of several projects around Digital Amator TeleVision using SDR technics.
LimeSDRMini is the main supported SDR hardware for now.
This project is less user friendly than BATC Portsdown also based on similar components.
This project help people who want to use latest developments and more in depeth experts parameters.
It should run on
- Raspberry Pi
- Nvidia Jetson Nano
- Some parts works on regular X86 Debian based
- Pi : Assuming a Raspbian Lite installation (stretch) : https://www.raspberrypi.org/downloads/raspbian/
- Jetson Nano : Assuming a Linux Tegra Ubuntu
- X86 : Debian stretch based
Be sure to have git package installed :
sudo apt-get update
sudo apt-get install gitYou can now clone the repository. A script (install.sh) is there for easy installation. You could inspect it and make steps manualy in case of any doubt.
git clone https://github.com/F5OEO/dvbsdr
cd dvbsdr
./install.shScripts are located under dvbsdr/scripts
- Pi : Encode from Picamera or USB Webcam
./encode_modulate.sh- Jetson nano : Encode from Picamera V2 or transmodulate from an incoming IP transport stream
./jetson_nano.sh- All : Modulate from an incoming IP transport stream
./encode_modulate.shPlease inspect each script, parameters are mainly self documented.
In order to decrease USB bandwidth and have better signal quality, a special Firmware is available.
In order to use this mode you should prior flash it,
./install_fpga_mapping.shIf you like to reverse back to regular firmware
./restore_original_firmware.shSome components are installed but not used right now (csdr,leandvb,KisSpectrum...) which will be integrated in the future (or not) to extend DATV only transmission feature.