This document describes the code architecture and how everything fits together.
For security and anonymity properties, please see security.
Some components have specific documentation that go into greater detail:
Explain the differences between these layers and why the distinction exists. My thought was that after this section every aspect of the app is explained under either the Mullvad or the Talpid header. So it's clear which part they belong to. I yet don't know if this makes sense though.
See this document.
The tunnel state machine is the part of Talpid that coordinates the events for establishing a VPN connection. It acts upon requests for establishing a secure VPN connection or for disconnecting an already established connection and returning the system to its initial state. This involves also using other parts of Talpid to configure the system so that the security policies are applied and so that the connection works correctly without any further manual configuration necessary.
The tunnel state machine starts in an initial Disconnected state. In this state, no changes are
made to the operating system and no security policies are applied. When a request is sent to the
state machine to establish a connection, the state machine will progress first into a Connecting
state that will configure the operating system and setup a tunnel with a connection to a VPN server.
Once the configuration is complete and the connection is verified to be working, the state machine
then proceeds to a Connected state.
A request can be made to close the VPN connection. Such request will lead the state machine into
a Disconnecting state, which will close the connection to the VPN server and restore the operating
system to its original configuration. After the process is complete, the state machine returns to
the Disconnected state.
If an error occurs in the Connecting or Connected states, the state machine may proceed to an
Error state. It might reach this state either immediately (when an error occurs in the
Connecting state) or after passing through another state to tear down the tunnel (when an error
occurs in the Connected state). Either way, in this state the operating system is configured to
block all connections to avoid leaking any data. The objective is to ensure no data leaks from the
tunnel while the user has requested a secure connection, as defined in the security document.
A high-level overview of the tunnel state machine can be seen in the diagram below:
+--------------+ Request to connect +------------+
Start ------->| Disconnected +------------------------>| Connecting |
+--------------+ +----+--+--+-+
^ ^ | ^ |
| Will attempt to reconnect | | | |
| .----------------------------------' | | |
| | | | |
| | .-----------------' | |
| | | Unrecoverable | |
| | | error | |
| | Request to V | |
System is restored | | disconnect +-------+ | | Connection is configured
to its initial | | .-----------+ Error +----------------' | and working
configuration | | | +-------+ Request to |
| | | ^ connect |
| | | | |
| | | .------------' |
| | | | Unrecoverable |
| | | | error while |
| | | | in connected |
| | V | state V
+--+---+------+-+ +-----------+
| Disconnecting |<------------------------+ Connected |
+---------------+ Request to disconnect +-----------+
or unrecoverable
error
There are two types of inputs that the tunnel state machine react to. The first one is commands sent to the state machine, and the second is external events that the state machine listens to.
Besides the two main commands Connect and Disconnect, there are a few other commands that can be
sent to the tunnel state machine. The following list includes all the commands the tunnel state
machine can receive.
- Connect: establish a secure VPN connection
- Disconnect: tear down the active VPN connection and return the operating system to its initial configuration
- Allow LAN: enable or disable local network sharing, changing the security policies for some of the states
- Block when disconnected: configures whether the state machine should apply the security policy
for blocking all connections when it's in the
Disconnectedstate, effectively requesting the system to never allow connections outside the tunnel
Depending on the state of the machine, it will also listen for specific external events and act on them possibly by changing states. All of these events can be considered as tunnel events, but they happen on different scenarios and because of different causes.
- Tunnel is Up: the tunnel monitor notifies that the tunnel is working correctly
- Tunnel is Down: the tunnel monitor notifies that the tunnel has disconnected
- Tunnel monitor stopped: communication to the tunnel monitor was lost
- Is offline: notify the tunnel state machine if the operating system is connected or not to the network, so that it can safely wait for connectivity to be restored without endlessly retrying to establish the VPN connection. Some care needs to be taken to not get stuck in the offline state for too long on macOS.
Every time the state machine changes state, it will output a TunnelStateTransition. This is an
enum type representing which state the tunnel state machine has entered and any associated
metadata that might be useful.
- Disconnected
- Connecting: includes the information of the endpoint it is trying to connect to
- Connected: includes the information of the endpoint it is connected to
- Disconnecting: includes the state it will transition to once successfully disconnected, which
is represented as the action it will take after disconnected, listed below:
- Nothing: proceed to the
Disconnectedstate - Block: proceed to the
Errorstate - Reconnect: proceed to the
Connectingstate
- Nothing: proceed to the
- Error: includes the cause of the error and the information if the operating system was successfully configured to block all connections
The tunnel state machine has an offline monitor that tries to detect when a device will certainly not be able to connect to a tunnel or reach the API. In doing so, the offline monitor cannot send any traffic. In general, this involves either relying on platform APIs specifically designed for this purpose or querying the system's networking config to enumerate network interface state or the routing table.
On Windows, connectivity is inferred if there exists an enabled interface with either an IPv4 or an IPv6 address and the machine is not suspended. The suspend/wakeup events matter because previously the TAP driver and currently Wintun might not work correctly early after boot, as such, the offline mode is used to enforce a grace period.
The conditions are affirmed by doing the following:
- Listening for changes in the network adapter state via
NotifyIpInterfaceChange- receiving callbacks whenever a network interface is changed or added via winnet. - Checking if the machine is suspended by listening for power state broadcasts by creating a window and listening for power state messages.
On Linux, connectivity is inferred by checking if there exists a route to a public IP address. Currently the Mullvad API IP is used, but the actual IP does not matter as long as it's not a local one. This is done via Netlink and the route is queried via the exclusion firewall mark - otherwise, when a tunnel is connected, the address would always be routable as it'd be routed through the tunnel interface. As such, the offline monitor is somewhat coupled to routing and split tunelling on Linux.
On macOS, the offline monitor uses SCNetworkReachability callbacks to detect changes in
connectivity and then enumerates network interfaces via SCDynamicStore and assumes connectivity
if an active physical interface exists. The interfaces are enumerated because sometimes
SCNetworkReachability can trigger a callback signalling full connectivity even when there exists
no default route.
After coming back from sleep, the network reachability callback won't be invoked until macOS has done some verification tasks, some of which may depend on DNS. Since our firewall will block DNS, the tasks will be delayed, and so will the callback. Circumventing the call back is of no use - until the timeouts are hit, macOS won't publish a default route to the routing table, which is needed for routing tunnel traffic.
To detect connectivity on Android, the app relies on ConnectivityManager by listening for
changes to the availability of non-VPN networks that provide internet connectivity. Connectivity
is inferred if such a network exists.
The iOS app uses WireGuard kit's offline detection, which in turn uses NWPathMonitor to listen
for changes to the route table and assumes connectivity if a default route exists.
See the split tunneling documentation.