-
Notifications
You must be signed in to change notification settings - Fork 1
/
Copy pathTMMH-006_A1_Information.txt
108 lines (99 loc) · 4.67 KB
/
TMMH-006_A1_Information.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
----------------------------------------------------------------------------------------------------
PROJECT INFORMATION
NAME: Taig Milling Machine Handles
REVISION: A1
START DATE: 2/28/2022
CURRENT VERSION DATE: 2/28/2022
LICENSE: GPLv3
AUTHOR: Justin Grimes (@zelon88)
DESCRIPTION: A set of axis control handles that can be attached to Taig milling machines to allow for
manual operation of the machine. Replaces electronic stepper motors with analog handles. Allows the
operator of the machine to control the axis' by hand.
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
PART INFORMATION
NAME: Handle - Assembly
PART ID: TMMH-005
REVISION: A1
START DATE: 2/28/2022
CURRENT VERSION DATE: 2/28/2022
AUTHOR: Justin Grimes (@zelon88)
DESCRIPTION: The Handle Assembly contains all the components required to retrofit handles onto one
axis of a Taig Milling Machine. Three sets of handles are required to retrofit an entire 3 axis
milling machine. In this assembly, four Modular Handles are shown attached to a central
Handle Wheel. The handle assembly function with any number of modular handles installed.
FILE NAME: TMMH-005.scad
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
PRINTER CONFIGURATION
NOTE: For bulk printing instructions; see "TMMH-006.scad".
NOTE: For component printing instructions; see the ".scad" file for the desired component.
PRINTER TYPE: XYZPrinting da Vinci Jr. 1.0A Pro
SLICER: XYZPrint Version 2.0.21
NOZZLE DIAMETER: 0.40mm
NOZZLE MATERIAL: Copper
NOZZLE TEMPERATURE: 210c
NOZZLE FIRST LAYER TEMPERATURE: 215c
LAYER HEIGHT: 0.20mm
FIRST LAYER HEIGHT: 0.35mm
SHELL THICKNESS NORMAL: 2 Layers
SHELL THICKNESS TOP & BOTTOM SURFACE: 5 Layers
INNER SHELLS: 0mm
LIGHTWEIGHT: No
INFILL DENSITY: 100%
INFILL TYPE: Gyroid
DETAIL THRESHOLD: 0.001mm
AVOID CROSSING PRINTED PARTS: No
SHELLS NORMAL SPEED: 30mm/s
SHELLS SURFACE SPEED: 30mm/s
SHELL SMALL RADIUS SPEED: 20mm/s
INFILL NORMAL SPEED: 45mm/s
INFILL TOP SURFACE SPEED: 45mm/s
SOLID INFILL SPEED: 45mm/s
BRIDGE PRINTING SPEED: 20mm/s
NON-PRINTING MOVEMENT SPEED: 50mm/s
BOTTOM LAYER SPEED: 10mm/s
RETRACT SPEED: 30mm/s
AUTO SPEED ADJUSTMENT FOR SMALL PARTS: No
BRIM: No
SUPPORTS: No
RAFT: No
RETRACT LENGTH: 4.5mm
ACTIVATE THRESHOLD (MIN TRAVEL LENGTH): 2mm
RETRACTION NOZZLE LIFT: 0mm
ADD EXTRA FILAMENT (WHEN TRAVEL < RETRACTION): 0mm
RETRACT EACH LAYER: Yes
DISABLE RETRACTION CURRENT PERIMETER: Yes
SHELL EXTRUSION RATIO: 100%
SHELL FILL EXTRUSION RATIO: 100%
INFILL EXTRUSION RATIO: 100%
SEAM CORNER PREFERENCES: "Smart Hiding"
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
PARTS LIST
1x Handle - Wheel, TMMH-001
4x Handle - Modular Handle, TMMH-002
8x Handle - Modular Washer, TMMH-003
4x Handle - Modular Endcap, TMMH-004
8x Screws, M2.5 x 8mm
4x Screws, M2.5 x 10mm
12x Drops Threadlocker, Loctite Blue or Red
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
MANUFACTURING INSTRUCTIONS
1. Remove the desired servo motor from the Taig Milling Machine.
2. Slide TMMH-001 onto the exposed axis hub of the Taig Milling Machine with the flat side of the
TMMH-001 facing towards the milling machine.
3. Insert 8x M2.5 x 8mm screws into the 8x small holes located around the center hub of TMMH-001.
4. Insert TMMH-003 onto the small end of TMMH-002.
5. Insert TMMH-002 into one of the 4 large holes in TMMH-001 so that TMMH-002 is pointed away from
the milling machine.
6, Slowly complete one rotation of the newly installed axis before completing any more
installation steps. Ensure that the handle can rotate freely and is free from any obstructions.
7. Insert TMMH-003 onto the small end of TMMH-001 that remains exposed through TMMH-001.
8. Insert an M2.5 x 10mm screw into the small hole of TMMH-004 and apply one drop of
threadlocker to the threads.
9. Thread the M2.5 x 10mm screw with TMMH-004 attached into the small hole at the end of TMMH-002.
10. Repeat steps 4 through 9 to add as many handles as desired.
11. Repeat steps 1 through 10 to replace as many servos as desired.
----------------------------------------------------------------------------------------------------