TBSECP3 driver (standalone version)

This is a modified version of the tbsecp3 module (and the dependend modules) from the tbsdtv/linux_media repository.

These are out-of-tree modules and do not require a full v4l media tree.

It is currently only tested on ArchLinux (Linux 4.18) with a TBS 6281SE DVB-T/T2/C.

Contents

This repo currently contains the following modules:

• tbsecp3
• dvb-frontends
  • tas2101
  • mxl58x
  • stv091x
  • tas2971
  • stid135
  • si2168
  • si2183
  • mn88436
  • mtv23x
  • gx1503
• tuners
  • av201x
  • stv6120
  • si2157
  • mxl603

Modifications

The upstream drivers are only modified to fix some build failures. Currently there are two major problems with the upstream drivers:

• The min and max frequency settings recently changed in the v4l media tree. The units of the settings were converted to Hz and some defines for MHz and kHz were introduced. The media tree in the kernel does not contain this changes yet, so we need to add back the old format of the settings inside #ifdef.

• The tbsdtv/linux_media tree contains some patches to add spi_read and spi_write functions to the device operations for the dvb-frontends and tuners. This requires a modification of the dvb-core module. Because the aim of this repo is to use the dvb-core module from your running linux kernel, this does not work.

  This modifications are ifdef'ed with TBS_STANDALONE. So you cannot use spi_read and spi_write with the modules from this repository. But this should no be required for normal operation.

• Some files are missing an include of linux/version.h.

Build

To build the modules just execute:

make

and install the modules with:

make modules_install

This will build the modules for the running kernel. If you want to build the modules for another kernel (maybe during update before rebooting) you can use the KDIR variable:

make KDIR=/lib/modules/4.18.12-arch1-1-ARCH/build
make KDIR=/lib/modules/4.18.12-arch1-1-ARCH/build modules_install