-
Notifications
You must be signed in to change notification settings - Fork 0
Shelly Model Information
Device | Supported | Supported Since | Notes |
---|---|---|---|
Shelly 1 | ✅ | v0.0.1 | |
Shelly 1PM | ✅ | v0.0.1 | |
Shelly 2.5 | ✅ | v0.0.1 | |
Shelly 4Pro | ✅ | v0.0.10 | Needs physical validation |
Shelly Dimmer/SL | ✅ | v0.0.1 | |
Shelly Door/Window | ✅ | v0.0.1 | |
Shelly Door/Window 2 | ✅ | v0.2.3 | |
Shelly H&T | ✅ | v0.0.1 | |
Shelly Flood | ✅ | v0.0.1 | |
Shelly DS1820 Add-on | ✅ | v0.0.6 | |
Shelly DHT22 Add-on | ✅ | v0.0.6 | |
Shelly Detached Switch Add-on | ✅ | v0.1.0 | |
Shelly Bulb | ✅ | v0.0.6 | Needs physical validation |
Shelly Bulb Vintage | ✅ | v0.0.6 | |
Shelly Bulb Duo | ✅ | v0.0.4 | |
Shelly EM | ✅ | v0.0.7 | |
Shelly 3EM | ✅ | v0.0.7 | Needs physical validation |
Shelly RGBW2 | ✅ | v0.0.10 | |
Shelly Plug (US) | ✅ | v0.0.6 | |
Shelly PlugS | ✅ | v0.0.6 | |
Shelly i3 | ✅ | v0.2.2 | |
Shelly Button1 | ✅ | v0.2.3 | |
Shelly Gas | ✅ | v0.3.0 | |
Shelly Uni | ❌ | N/A | |
Shelly Motion | ❌ | N/A |
The Shelly 1 is a simple on/off relay device. There are no special functions besides the capability of the on/off relay.
The Shelly 1PM is an upgraded Shelly 1. This is based on the Shelly 1, but adds power reporting, energy consumption, and internal temperature monitoring.
The Shelly 2.5 can be equated to two Shelly 1PM's in a single enclosure. This has two controllable relays with separate power reporting and energy consumption on each "Channel". Shelly MQTT exposes half of this device as a single device in Indigo.
Making a new device will require you to specify which Channel you are using. The internal temperature will be shared between both Indigo devices.
The Shelly Dimmer/SL is similar to a Shelly 1PM in that it reports power and energy usage, and internal temperature. However, it allows for dimmable control of the load.
The Shelly Door/Window is a small device whose main purpose is to determine if something is open or closed. However, the device contains a lux sensor to detect brightness. This is a battery operated device, so data is reported at lower frequencies. The battery level of this device is reported and displayed nicely in the Indigo UI.
The Shelly Door/Window 2 is a Shelly Door/Window with upgraded internals for better power management and internal temperature monitoring.
The Shelly H&T is a battery-operated humidity and temperature sensor. The device configuration allows you to convert temperature to different units as well as provide custom adjustments to both sensor values. This allows you to correct inaccurate sensors. The battery level of this device is reported and displayed nicely in the Indigo UI. This device will go into sleep mode when data does not need to be sent back, so data will be updated at a lower frequency.
The Shelly Flood is a battery-operated water detection device with a temperature sensor. This temperature sensor value can be configured to display different units and can also be manually adjusted. The battery level of this device is reported and displayed nicely in the Indigo UI. This device will go into sleep mode when data does not need to be sent back, so data will be updated at a lower frequency.
The DS1820 add-on is a "hat" that plugs into a Shelly 1 or Shelly 1PM and provides up to 3 temperature tensors.
The DHT22 add-on is a temperature and humidity add-on sensor for the Shelly 1 or Shelly 1PM.
This is a virtual device created by the plugin that allows you to have an individual device for the switch input of a supported Shelly device. The switch input can be put into a "detached" state where the switch does not control the relay automatically. This mode can be used to gain an input device and this input can be represented as an individual device within Indigo. The "Detached Switch" device can be added to the following devices:
- Shelly 1
- Shelly 1PM
- Shelly 2.5
- Shelly 4 Pro
- Shelly Dimmer/SL
The Shelly Bulb is an RGBW light bulb with a Shelly controller integrated into it. There is no power or energy monitoring at the moment.
The Shelly Vintage is a classic-style lightbulb that has dimming capabilities. This device supports power and energy monitoring.
The Shelly Duo is a smaller lightbulb with dimming control and temperature control.
The Shelly EM is a device designed for energy monitoring. It has two current monitoring clamps and can measure energy, energy returned, power, reactive power, and voltage.
The Shelly 3EM is very similar to the Shelly EM except that it has the capability of monitoring 3-phase power and the power factor.
The Shelly 4Pro is a din-mountable device that can control 4 high-power relays. This is basically 4 Shelly 1PM's in a single device. It has energy and power monitoring on each channel and each channel has separated inputs and outputs.
The Shelly RGBW2 is a small device the can power a 12 or 24 volt LED strip. This has power monitoring, but not energy monitoring.
Plug-and-play device that can control and measure the power of a device.
Plug-and-play device that can control and measure the power of a device.
3-input device.
WiFi-operated action and scenes activation button.
WiFi-operated gas sensor with sound and light alarm. Variants include EU/US versions with Compressed Natural Gas (CNG) and Liquefied Petroleum Gas (LPG) detection.
Shelly UNI is the smallest universal module that can make any old appliance smart! With this tiny, insulated chip, you can control any sensor and measure it, such as a liquid level sensor to measure the level of, or even automate the auto-filling system. No more waiting around in the morning for your coffee machine to heat its water and prepare your coffee! Just connect it to Shelly UNI and switch it on remotely as you please, or on a set schedule.
Always connected Wi-Fi Motion Sensor with over 1 year battery life, powered by Silicon Labs Wi-Fi IoT Solutions. Featuring a 6500 mAh rechargeable battery.