0.17.0.rc3

Changes

• Add new Exceptions @Adminiuga (zigpy#334)
• Lock cluster enums @Adminiuga (zigpy#333)
• Update Basic cluster enums @Adminiuga (zigpy#332)
• Normalize attribute reports and Attribute Reads @Adminiuga (zigpy#331)
• HVAC FAN cluster enums @Adminiuga (zigpy#330)
• 0.16.0 Release @Adminiuga (zigpy#317)
• Allow TSN override for zcl requests @Adminiuga (zigpy#316)
• Add enums for IAS Ace cluster @dmulcahey (zigpy#315)
• 0.15.0 Release @Adminiuga (zigpy#314)
• Use asynctest for asyncio tests @Adminiuga (zigpy#311)
• 0.14.0 Release @Adminiuga (zigpy#302)
• Refactor zigpy OTA provider logging @Adminiuga (zigpy#301)
• Send content-type header on firmware get requests @walthowd (zigpy#299)
• Fix Identify cluster trigger_effect command arguments @chmielowiec (zigpy#298)
• Update README.md with PyPI link to zigpy-cc @Gamester17 (zigpy#294)
• Add flag to device to allow skipping configuration @dmulcahey (zigpy#285)
• Update README.md with specific ZiGate radio modules @Gamester17 (zigpy#286)
• 0.13.0 Release @Adminiuga (zigpy#284)
• Update README.md with link to the zigpy-cc module for experimental TI CC chip support with custom Z-Stack firmware @Gamester17 (zigpy#274)
• add ledvance fw provider @billyburly (zigpy#278)
• 0.12.0 Release. @Adminiuga (zigpy#273)
• Add configuration dict option @Adminiuga (zigpy#271)
• Remove quirks from zigpy @prairiesnpr (zigpy#270)
• Allow inactive endpoints @dmulcahey (zigpy#266)
• Add a "Developer references" section to README.md @Hedda (zigpy#262)
• Create Contributors.md file with list of contributors @Hedda (zigpy#260)
• Added a "How to contribute" section to README.md @Hedda (zigpy#261)
• Extract IKEA OTA image offset and size directly from the container @puddly (zigpy#259)
• 0.11.0 Release. @Adminiuga (zigpy#256)
• Debug log level for zdo. @Adminiuga (zigpy#255)
• Update README.md listing ETRX357 series as compatible hardware @Hedda (zigpy#251)
• Re-instantiate list items for serialization. @Adminiuga (zigpy#248)
• Fix install code CRC endiness. @Adminiuga (zigpy#249)
• 0.10.0 Release. @Adminiuga (zigpy#247)
• Use zigpy.types.EUI64 for ieee. @Adminiuga (zigpy#246)
• Allow Zigbee network parameters update. @Adminiuga (zigpy#243)
• Refactor EUI64 class. @Adminiuga (zigpy#240)
• Remove bad hack @Adminiuga (zigpy#239)
• Update README.md formatting @Gamester17 (zigpy#238)
• Don't use Command enum for cluster specific commands. @Adminiuga (zigpy#236)
• Override ZLL profile id for replies. @Adminiuga (zigpy#235)
• ZCL Foundation Data types. @Adminiuga (zigpy#232)
• [DEV] Update README.md to mention experimental ZiGate support @Hedda (zigpy#233)
• 0.9.0 Release. @Adminiuga (zigpy#231)
• Refactor ControllerApplication.request() @Adminiuga (zigpy#230)
• Refactor cluster binding. @Adminiuga (zigpy#229)
• fix binding dst endpoint @abmantis (zigpy#222)
• Add expect_reply parameter back. @Adminiuga (zigpy#227)
• Remove timeout parameter. @Adminiuga (zigpy#226)
• Pass device itself for ControllerApplication.request() addressing. @Adminiuga (zigpy#225)
• Allow TSN override for replies @Adminiuga (zigpy#224)
• Handle request/reply interactions in zigpy @Adminiuga (zigpy#223)
• 0.8.0 Release. @Adminiuga (zigpy#221)
• Format code with black. @Adminiuga (zigpy#220)
• Refactor Cluster.write_attributes() @Adminiuga (zigpy#219)
• Refactor ZCL foundation COMMANDS. @Adminiuga (zigpy#218)
• Differentiate input/output cluster instances. @Adminiuga (zigpy#216)
• Update IAS Cluster schema. @Adminiuga (zigpy#215)
• Load manufacturer/model attributes only before applying quirks. @Adminiuga (zigpy#214)
• Initial implementation of Zigbee OTA updates. @Adminiuga (zigpy#213)
• Update README.md with links to PyPI release packages (dev branch) @Hedda (zigpy#211)
• Refactor ZCL serialization/deserialization. @Adminiuga (zigpy#212)
• a little r @Nemesis24 (zigpy#210)
• Add missing IasAce command payloads @presslab-us (zigpy#200)
• Don't quirk quirked devices @dmulcahey (zigpy#199)
• Fix typo. @Adminiuga (zigpy#196)
• 0.7.0 Release. @Adminiuga (zigpy#195)
• Update device.Device() nwk property. @Adminiuga (zigpy#192)
• Don't fail deserialization of undefined statuses @Adminiuga (zigpy#191)
• Don't override endpoint's manufacturer/model from quirks. @Adminiuga (zigpy#187)
• 0.6.0 Release @Adminiuga (zigpy#186)
• Allow multiple manufacturer/model in quirks signature @Adminiuga (zigpy#184)
• Quirks Device match refactoring. @Adminiuga (zigpy#183)
• Refactor node_descriptor request. @Adminiuga (zigpy#182)
• Model & Manufacturer properties for zigpy.device.Device class. @Adminiuga (zigpy#181)
• Add ZLO device types @jurriaan (zigpy#176)
• ZDO Schema updates. @Adminiuga (zigpy#175)
• 0.4.2 Release. @Adminiuga (zigpy#173)
• Fix DoorLock attributes schema. @Adminiuga (zigpy#172)
• Fill in missing schema entries for DoorLock cluster @presslab-us (zigpy#168)
• Use ep_attribute when adding an endpoint to a group. @Adminiuga (zigpy#171)
• Fill in missing schema entries for Thermostat cluster @presslab-us (zigpy#169)
• Fix touchlink cluster schema. @Adminiuga (zigpy#170)
• 0.4.1 Release @Adminiuga (zigpy#167)
• Allow "Optional" parameters for Commands/Responses schema. @Adminiuga (zigpy#160)
• Fix ConfigureReportingResponseRecord and WriteAttributeResponseRecord serialization/deserialization. @Adminiuga (zigpy#161)
• Fix float type (Single/Double) deserialization. @Adminiuga (zigpy#164)
• Fix hvac.Thermostat attribute typo. @Adminiuga (zigpy#163)
• Use endpoints as group members. @Adminiuga (zigpy#157)
• RFC Zigpy group management framework. @Adminiuga (zigpy#156)
• Relax schema check for ZCL replies. @Adminiuga (zigpy#153)
• Run cluster_general_request() response for Time cluster in the loop. @Adminiuga (zigpy#152)
• Prevent slicing and int.from_bytes from allowing invalid deserialization @puddly (zigpy#155)
• raw attribute for CharacterString class. @Adminiuga (zigpy#151)
• Mention and link to the related ZHA Device Handlers project in README.md @Hedda (zigpy#146)
• Add a context parameter to ListenableMixin.add_listener @puddly (zigpy#150)
• Implement ZCL CharacterString Class. @Adminiuga (zigpy#147)
• Implement ZDO commands as enums. @Adminiuga (zigpy#143)
• Bump version to 0.3.3 @Adminiuga (zigpy#149)
• repr for zcl.foundation.TypeValue. @Adminiuga (zigpy#145)
• Update ZLL Commissioning cluster schema. @Adminiuga (zigpy#142)
• Fix circular imports and tests task leaking. @Adminiuga (zigpy#148)
• Add "node descriptor" to zigpy.device.Device class. @Adminiuga (zigpy#140)
• 0.3.1 -> 0.3.2 @damarco (zigpy#141)
• Drop the device from DB if not fully discovered. @Adminiuga (zigpy#137)
• Add additional supported xbee modules @prairiesnpr (zigpy#139)
• Added the new ConBee II (ConBee 2) to known working Zigbee radios @Hedda (zigpy#136)
• Handle TimeoutError during device removal. @Adminiuga (zigpy#138)
• Log unknown cluster messages at debug level. @Adminiuga (zigpy#135)
• 0.3.0 -> 0.3.1 @damarco (zigpy#134)
• Add ControllerApplication.shutdown() method. @Adminiuga (zigpy#133)
• Restore attributes before and after applying quirks @damarco (zigpy#131)
• Add DeviceType.THERMOSTAT @Adminiuga (zigpy#129)
• 0.2.0 -> 0.3.0 @damarco (zigpy#128)
• Add support for model and manufacturer in quirks signatures @damarco (zigpy#126)
• Fix imports in quirks @damarco (zigpy#118)
• Fix tox @damarco (zigpy#119)
• Add ZCL discovery commands. @Adminiuga (zigpy#114)
• Update device persistence after quirks matching @dmulcahey (zigpy#108)
• Update README.md with a more descriptive description @Hedda (zigpy#112)
• Pop device from registry after ZDO leave request. @Adminiuga (zigpy#110)
• Fix Ikea Tradfri plug input clusters @damarco (zigpy#106)
• Add schema to zcl.clusters.general.OnOff server commands. @Adminiuga (zigpy#103)
• Broadcast/unicast 'mgmt_permit_joining_req' implementation @Adminiuga (zigpy#91)
• fix to allow Chinese characters in manufacture/model name @zalke (zigpy#99)
• Update README.md to also mention and link to zigpy-deconz @Hedda (zigpy#100)
• Add support for targeted permit @damarco (zigpy#88)
• Add Smartthings multipurpose sensor quirks. @Adminiuga (zigpy#83)
• Add the Aqara Magic Cube @hobbypunk90 (zigpy#90)
• Updated README.md with another link and a further extended description @Hedda (zigpy#98)
• Add support for ikea tradfri plug @damarco (zigpy#94)
• Add Support for Keen Home Temp and Humidity Sensor @dbajric (zigpy#92)
• Updated README.md with links and a extended description @Hedda (zigpy#86)
• Support manufacturer id for configure_reporting(). @Adminiuga (zigpy#82)
• Fix lint for new version of flake8 @rcloran (zigpy#95)
• Add model/manufacturer attributes to CustomEndpoint @damarco (zigpy#84)
• 0.1.0 -> 0.2.0 @rcloran (zigpy#80)
• Run travis tests on Python 3.7 @rcloran (zigpy#79)
• update Cluster.configure_reporiting to accept named attributes @Adminiuga (zigpy#75)
• Create _idx Cluster class attributes even if skipping the registry @Adminiuga (zigpy#74)
• update quirks test to handle cluster id ranges @Adminiuga (zigpy#73)
• Strip anything starting with 0x00 in manufacturer/model attributes values @Adminiuga (zigpy#72)
• Add 'only_cache' option to read_attributes() @damarco (zigpy#69)
• add a quirk for king of fans zigbee receiver @igorbernstein2 (zigpy#58)
• add manufacturer and model to endpoint @dmulcahey (zigpy#56)
• cleanup zdo.leave() method and remove unneeded extra parameter from cmd request @Adminiuga (zigpy#66)
• Add support for Mgmt_Lqi_req and Mgmt_Rtg_rsp @Adminiuga (zigpy#64)
• make class zdo.Status a sub-class of uint8_t @Adminiuga (zigpy#65)
• Update cluster attributes to bitmapXX where applicable. @Adminiuga (zigpy#62)
• Add support for Smartthings Temperature/Humidity Sensor @damarco (zigpy#51)
• support zha window covering devices @felixstorm (zigpy#59)
• Add bitmap type for 'occupancy' attribute of OccupancySensing cluster. @Adminiuga (zigpy#52)
• Move OnOffCluster from in_cluster to out_cluster @damarco (zigpy#50)
• 0.0.3 -> 0.1.0 @rcloran (zigpy#49)
• Add ZHA light and occupancy sensor profiles @rcloran (zigpy#47)
• Handle devices with quirks @rcloran (zigpy#45)
• Deserialize using device/endpoint/cluster object tree @rcloran (zigpy#44)
• Add last_seen to devices @rcloran (zigpy#43)
• Make Device.request async @rcloran (zigpy#42)
• Switch async tests to pytest-asyncio @rcloran (zigpy#41)
• Allow custom cluster objects to be added to endpoints @rcloran (zigpy#40)
• Add device_initialized to application @rcloran (zigpy#39)
• Switch from coros to async/await @rcloran (zigpy#31)
• Fix zll profile in zha cluster2 @Yoda-x (zigpy#36)
• Fixed incorrect attribute types in BinaryOutput and BinaryInput clusters @SchaumburgM (zigpy#34)
  ...