Skip to content
/ PDFNetWrappers Public

Code repository for building different language bindings for PDFNetC.

License

View license
49 stars 38 forks Branches Tags Activity
Star
Notifications You must be signed in to change notification settings

ApryseSDK/PDFNetWrappers

BranchesTags

Repository files navigation

NOTE FOR DEVELOPERS

No commit to master unless applicable. All commits for current development should go to next_release. Notice that master synchronizes with the latest stable PDFNet and should not have changes unless applicable. next_release is merged into master following an offical release.

About

This project demonstrates how to bind PDFNetC with other languages. This project provides the necessary files to generate language bindings between PDFNetC and the following:

PHP
Python
Ruby
Go

Requirements

This project uses SWIG (http://www.swig.org/) in order to generate the language binding source files. Furthermore, a C++ build environment is necessary for compiling and producing the bridge file. We have tested this project on the following:

Environments and versions

  • SWIG 2.0.4 - 2.0.12 or SWIG 3.0.12 or SWIG 4.0.2 and above
  • CMake version 2.8+
  • Linux: GCC 4.6 and above
  • Windows: Visual Studio 2012 and above or mingw-w64 (for Go only)
  • macOS: XCode 5.0 and above

Get PDFNetC

Lastly, you will need to obtain the most recent package for PDFNetC. Make sure you download the one for PDFNetC (not for .NET). You will also need to make sure that the architecture of PDFNetC you download matches the architecture of your interpreter. For example, if you have 64-bit Ruby interpreter, you will need to obtain the 64-bit version of PDFNetC.

Strict PHP and SWIG version compatibility for PHP wrapper

Having a single version of SWIG and PHP installed on the server is preferred. Any other combinations of SWIG and PHP versions not listed below is likely to encounter problems. If your build is not working as expected then please double check the version numbers. Installing multiple versions of SWIG and PHP may also produce issues.

Strict PYTHON3 and SWIG3 version compatibility for PYTHON wrapper

Having a single version of SWIG and PYTHON installed on the server is preferred. Any other combinations of SWIG and PYTHON versions not listed below is likely to encounter problems. If your build is not working as expected then please double check the version numbers. Installing multiple versions of SWIG and PYTHON may also produce issues.

  • Targeting PYTHON3

    • PYTHON3 with developer extensions and SWIG3 (3.0.12) or above

Strict GO and SWIG3 version compatibility for Go wrapper

Having a single version of SWIG and GO installed on the server is preferred. Any other combinations of SWIG and GO versions not listed below is likely to encounter problems. If your build is not working as expected then please double check the version numbers. Installing multiple versions of SWIG and Go may also produce issues.

  • Targeting GO

    • GO verified with version 1.15, MINGW-W64 verified with version 4.3 and SWIG3 (3.0.12) or above

Building

The following steps describe how to build a language binding for PDFNetC using this source package. This guide assumes you are familiar with CMake project generation. For more information, please visit http://www.cmake.org/

  1. Unpack PDFNetC to the PDFNetC folder. Make sure that both Headers/ and Lib/ folders exists inside the PDFNetC folder of this project.

  2. Create an out-of-source build tree directory (i.e. Build) mkdir Build

  3. Go into the build directory and invoke CMake. At this step you can include other CMake options. (Alternatively, you may be able to use ccmake or cmake-gui which can show you which options you can set and change to modify the project file generation.)

a. Python cd Build cmake -D BUILD_PDFNetPython=ON ..

b. Ruby cd Build cmake -D BUILD_PDFNetRuby=ON ..

c. PHP cd Build cmake -D BUILD_PDFNetPHP=ON ..

d. Go cd Build cmake -D BUILD_PDFTronGo=ON .. for Linux; cd Build cmake -G "MinGW Makefiles" -D BUILD_PDFTronGo=ON .. for Windows.

  1. Run make or the IDE's build command make
  • For Go, instead of running make command, copy pdftron directory under Build/PDFTronGo/ to GOPATH/src/, change working directory to GOPATH/src/pdftron and then run go build

NOTE: To rebuild the bindings, you may need to delete the files in Build and re-run cmake. This is because the CMake script itself compiles the SWIG bindings.

Running the samples

  1. In order to run the samples, you will need to run the install command first (or build the install projects from within the IDEs). make install
  • This should place the bridge files to the PDFNetC/Lib folder (where the PDFNetC library was extracted from the previous section).
  • For Go, go to GOPATH/src/pdftron directory and run go install
  1. Navigate to Samples folder and either run the runall scripts, or go into the individual samples folder and run the RunTest scripts.
  2. Navigate to Samples/TestFiles/Output for outputs.

Example

Windows

Suppose you wanted to build and run the 64-bit GO wrappers on Windows. You could run the following set of commands:

md wrappers_build # Make a directory to build the wrappers in.
cd wrappers_build # Move to that directory.
git clone https://github.com/PDFTron/PDFNetWrappers # Git the code.
cd PDFNetWrappers/PDFNetC # Move to where we download PDFNet.
download PDFNetC64.zip from https://www.pdftron.com/downloads/PDFNetC64.zip # Download PDFNet.
unzip PDFNetC64.zip # Unzip PDFNet.
move PDFNetC64/Headers . # Move PDFNet Headers/ into place.
move PDFNetC64/Lib . # Move PDFNet Lib/ into place.
cd .. # Go back up.
md Build # Create a directory to create the Makefiles in.
cd Build # Move to that directory.
cmake -G "MinGW Makefiles" -D BUILD_PDFTronGo=ON .. # Create the pdftron directory under Build/PDFTronGo/ directory.
make # Build the GO wrappers with SWIG.
cd PDFTronGo # Move to that directory.
go env # Find the go path in GOPATH environment variable.
xcopy /E pdftron GOPATH\src\pdftron\ # Copy pdftron directory to GOPATH/src directory.
cd GOPATH\src\pdftron # Move to pdftron directory.
go install # Build and install pdftron package for Go
cd ../Samples # Move to the Samples directory.
./runall_go.bat # Run all Go code samples, using the new wrappers.

More information at PDFTron SDK for Go

Linux

Linux PHP8

Suppose you wanted to build and run the 64-bit PHP8 wrappers on Linux. You could run the following set of commands:

# First, install swig 4.1.0 for PHP8 wrapper using swig/master branch
git clone https://github.com/swig/swig.git
cd swig
mkdir Build
cd Build 
cmake ..
make
sudo make install
swig -version # check to make sure swig version 4.1.0 before continuing

# Now, build PHP wrapper. Navigate to the location where you want to build the wrapper
mkdir wrappers_build # Make a directory to build the wrappers in.
cd wrappers_build # Move to that directory.
git clone https://github.com/PDFTron/PDFNetWrappers # Git the code.
cd PDFNetWrappers/PDFNetC # Move to where we download PDFNet.
wget https://www.pdftron.com/downloads/PDFNetC64.tar.gz # Download PDFNet.
tar xzvf PDFNetC64.tar.gz # Unpack PDFNet.
mv PDFNetC64/Headers/ . # Move PDFNet Headers/ into place.
mv PDFNetC64/Lib/ . # Move PDFNet Lib/ into place.
cd .. # Go back up.
mkdir Build # Create a directory to create the Makefiles in.
cd Build # Move to that directory.
sudo apt-get install php-dev # or sudo yum install php-devel, to add php-dev for required PHP include directories
cmake -D BUILD_PDFNetPHP=ON .. # Create the Makefiles with CMake.
make # Build the PHP wrappers with SWIG.
sudo make install # Copy the PHP wrappers to where the samples can find them.
cd ../Samples # Move to the Samples directory.
./runall_php.sh # Run all PHP code samples, using the new wrappers.

Please note that you may need to register PDFNetPHP.so as an extension to your PHP by adding the following line in your php.ini:

extension=/full/path/to/PDFNetPHP.so

Linux PHP7

Suppose you wanted to build and run the 64-bit PHP7 wrappers on Linux. You could run the following set of commands:

mkdir wrappers_build # Make a directory to build the wrappers in.
cd wrappers_build # Move to that directory.
git clone https://github.com/PDFTron/PDFNetWrappers # Git the code.
cd PDFNetWrappers/PDFNetC # Move to where we download PDFNet.
wget https://www.pdftron.com/downloads/PDFNetC64.tar.gz # Download PDFNet.
tar xzvf PDFNetC64.tar.gz # Unpack PDFNet.
mv PDFNetC64/Headers/ . # Move PDFNet Headers/ into place.
mv PDFNetC64/Lib/ . # Move PDFNet Lib/ into place.
cd .. # Go back up.
mkdir Build # Create a directory to create the Makefiles in.
cd Build # Move to that directory.
sudo apt-get install php-dev # or sudo yum install php-devel, to add php-dev for required PHP include directories
cmake -D BUILD_PDFNetPHP=ON .. # Create the Makefiles with CMake.
make # Build the PHP wrappers with SWIG.
sudo make install # Copy the PHP wrappers to where the samples can find them.
cd ../Samples # Move to the Samples directory.
./runall_php.sh # Run all PHP code samples, using the new wrappers.

Please note that you may need to register PDFNetPHP.so as an extension to your PHP by adding the following line in your php.ini:

extension=/full/path/to/PDFNetPHP.so

macOS

Suppose you wanted to build and run the Ruby wrappers on macOS. You could run the following set of commands:

mkdir wrappers_build # Make a directory to build the wrappers in.
cd wrappers_build # Move to that directory.
git clone https://github.com/PDFTron/PDFNetWrappers # Git the code.
cd PDFNetWrappers/PDFNetC # Move to where we download PDFNet.
curl -L -O https://www.pdftron.com/downloads/PDFNetCMac.zip # Download PDFNet.
unzip PDFNetCMac.zip # Unpack PDFNet.
mv PDFNetCMac/Headers/ . # Move PDFNet Headers/ into place.
mv PDFNetCMac/Lib/ . # Move PDFNet Lib/ into place.
cd .. # Go back up.
mkdir Build # Create a directory to create the Makefiles in.
cd Build # Move to that directory.
cmake -D BUILD_PDFNetRuby=ON .. # Create the Makefiles with CMake.
make # Build the Ruby wrappers with SWIG.
sudo make install # Copy the Ruby wrappers to where the samples can find them.
cp ../fix_rpaths.sh ../PDFNetC/Lib/  # fix rpath issue on Mac
cd ../PDFNetC/Lib/
sudo sh ./fix_rpaths.sh 
cd ../../Samples # Move to the Samples directory.
./runall_ruby.sh # Run all Ruby code samples, using the new wrappers.

Pre-built Binaries

You can download pre-built binaries from the following links:

Windows: Python 2.7.x

https://www.pdftron.com/downloads/PDFNetWrappers/PDFNetWrappersWin32.zip

https://www.pdftron.com/downloads/PDFNetWrappers/PDFNetWrappersWin64.zip

Linux: Python 2.7.x and Ruby 2.x

https://www.pdftron.com/downloads/PDFNetWrappers/PDFNetWrappersLinux.tar.gz

https://www.pdftron.com/downloads/PDFNetWrappers/PDFNetWrappersLinux64.tar.gz

Mac OS: Python 2.7.x and Ruby 2.x

https://www.pdftron.com/downloads/PDFNetWrappers/PDFNetWrappersMac.zip

Common Questions

Which versions of the interpreters are supported by this project?

Technically, any versions can be supported provided that some minor changes to the SWIG interface file must be made. Within PDFTron, we have successfully built language bindings for the following versions of the interpreter:

- PHP 5.3.x to 5.5.x, PHP 7.x
- Python 2.7.x to 3.3.x
- Ruby 2.x
- Go 1.15

Does this project support UCS4 builds of Python?

Yes. It is important to keep in mind however, that you use the include directories and the configuration header file of this Python build.

I cannot build PHP bindings for macOS

In order to build PHP bindings for macOS, we suggest building PHP yourself. When you try to use the bundled PHP interpreter with macOS, the CMake code generation process may not be able to locate the PHP header files as well as the PHP library file. We recommend using PHP7/SWIG3 to build PHP bindings for macOS.

Running the samples seems fine, but when I try to use it on my project, I am starting to get issues.

Make sure that your interpreter can find the PDFNetC library. The following information indicates where the PDFNetC library must be placed so that interpreters can find and load them:

Linux or macOS

Copy PDFNetC library (libPDFNetC.so or libPDFNetC.dylib) to any of the lib directories (i.e /usr/lib, /usr/local/lib, etc.)

Windows

Copy PDFNetC library (PDFNetC.dll) to %WINDIR%\System32 (or %WINDIR%\SysWOW64).

How can I change the install location?

In order to change the install location, modify the top level CMakelists.txt. Remove the forced setting of the CMAKE_INSTALL_PREFIX variable.

How can I build wrappers for PDFNet 9.3 and under?

The master branch is used for the latest stable PDFNet. In order to build wrappers using PDFNet 9.3.x, please use the following command to clone 9.3 branch instead (line 3 in Example):

git clone -b 9.3 --single-branch https://github.com/PDFTron/PDFNetWrappers # Git the code.

I'm seeing a line-ending (control character) issue.

Example: bad interpreter: /bin/sh^M: no such file or directory

Using dos2unix to convert line endings can help with this issue

Linux or macOS

brew install dos2unix
dos2unix **/*.sh

About

Code repository for building different language bindings for PDFNetC.

Resources

Readme

License

View license
Activity
Custom properties

Stars

49 stars

Watchers

32 watching

Forks

38 forks
Report repository

Releases

1 tags

Packages

No packages published

Contributors 33
+ 19 contributors

Languages