Skip to content

03 Setting up MCU hardware

Jump to bottom
hovanem edited this page Oct 9, 2017 · 3 revisions

Setting up MCU Hardware

  1. (While powered down) insert the SD card into the Raspberry Pi.

    Insert SD to Raspberry Pi


  2. (While powered down) connect one side of your ethernet cable to the Raspberry Pi and the other side to your ethernet router.

    Plug Ethernet to Raspberry Pi Plug Ethernet to Router


  3. Connect power to your Raspberry Pi.

    Plug in the Raspberry Pi


  4. Wait (up to) 60 seconds for the Raspberry Pi to become available on the network.

Clone this wiki locally