CP2102N Configuration
The CP2102N USB to UART device supports a number of configuration options. These configuration settings can be configured with the Silicon Labs Simplicity Studio
The CP2102N Device Configuration allows a number of the USB device attributes to be set for example:
- Vendor Id
- Product Id
- Max Power
- Manufacture String
- Product String
- Serial String
Note the Usb Ble Dongle hardware only supports a maximum of 300 mA through its on board fuse.
The CP2102N GPIO configuration allows the TX or RX Led indication to be enabled or disabled.
Disabled GPIO TX and RX Led indication
Enabled GPIO TX and RX Led indication
The CP2102N Advanced Serial Configuration allows the configuration of the UART options for example the allowed baud rates, data bits, stop bits, parity.
