You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
AWTRIX 2 used to run on an ESP8266. AWTRIX 3 requires more resources and therefore only runs on an ESP32.
If you have the official AWTRIX 2 mainboard, you can simply swap the ESP8266 Wemos D1 mini 1:1 with an ESP32 D1 mini without changing the pinout. However, you will need the AWTRIX2_upgrade.bin firmware as the pinout has remained the same.
If you have the official AWTRIX 2 mainboard, you can simply swap the ESP8266 Wemos D1 mini 1:1 with an ESP32 D1 mini without changing the pinout. However, you will need the [AWTRIX2_upgrade.bin](https://blueforcer.github.io/awtrix3/#/flasher?id=awtrix-20-controller-upgrade-with-esp32-d1-mini) firmware as the pinout has remained the same.
If you do not have a mainboard then replace your current ESP8266 with an ESP32 as a WROOM D2 variant, a normal NodeMCU32 should also do the trick.
Use the [pinout](https://blueforcer.github.io/awtrix3/#/hardware) of the Ulanzi and also flash the Ulanzi firmware
Use the [pinout](https://blueforcer.github.io/awtrix3/#/hardware) of the Ulanzi and also flash the [Ulanzi firmware](https://blueforcer.github.io/awtrix3/#/flasher?id=ulanzi-tc001-and-custom-builds-flasher)
