This repository is a collection of open-source hardware designs which have been submitted to the project.
3D Prints
- 3D Printable Stand - Small - Designed by TheTrain
- 3D Printable Stand - Large - Designed by TheTrain
- 3D Printable Fightstick Case - Designed by TheTrain
- 3D Printable Fightstick Case XL - Designed by Lucipher
- 3D Printable Open Stick Modular - Designed by TheTrain
- 3D Printable Open Stick Modular - Mini - Designed by TheTrain
- 3D Printable OSBMX Buttons - Designed by TheTrain & Ranalabs
GP2040-CE Official Boards
- RP2040 Advanced Breakout Board v5.6E with USB Passthrough - Designed by TheTrain
- RP2040 Advanced Breakout Board v5.2E (no USB Passthrough) - Designed by TheTrain
- RP2040 Basic Breakout Board v5.4E with USB Passthrough - Designed by TheTrain
- RP2040 Basic Breakout Board v5.4E (no USB Passthrough) - Designed by TheTrain
- RP2040 Mini Breakout Board v7.5E with USB Passthrough - Designed by TheTrain
- RP2040 Mini Breakout Board v7.3E (no USB Passthrough) - Designed by TheTrain
GP2040-CE Official Controllers
- ARC Accessibility Controller - Designed by TheTrain
- Flatbox Rev 5 RGB - Remixed by TheTrain from the Flatbox Rev 5 by Jfedor
- Flatbox Rev 5 Passthrough - Remixed by TheTrain from the Flatbox Rev 5 by Jfedor
- Open_Core0 v2.0 - Designed by TheTrain
- Open_Core0 WASD v2.0 - Designed by TheTrain
- Zero_Rhythm v1.0 - Designed by TheTrain
Retail Stick Replacement Boards
- Hori Fighting Edge PS3 (FE PS3) - Designed by TheTrain
- Hori Fighting Edge PS4 (FE PS4) - Designed by TheTrain
- Hori Real Arcade Pro N PS4 (RAP N PS4) - Designed by TheTrain
- Hori Real Arcade Pro VLX PS3 (RAP VLX PS3) - Designed by TheTrain
Supported Boards
- Ghost Auth v2.0 - Designed by TheTrain
- GP2040 Keyboard converter - Designed by Infraredaces
- USB Pasthrough Add-on Board - Designed by TheTrain
Miscellaneous
- Haute42/COSMOX Bottom Foam - Designed by TheTrain
- Sanjuks V3 AM5 Adapter Plate - Designed by TheTrain
Tutorials
- Focus Attack RGB LED Board Configuration for the RP2040 Advanced Breakout Board v5.6 - Written by TheTrain
- USB Passthrough Add-on Board Installation - Written by TheTrain
Vendor Resources
Any design submitted to this repository must be submitted by the original copyright holder and include a license. If your license requires attribution, you must provide details on how to appropriately attribute the design.
All copyrights are retained by the original author(s) unless the copyright is explicity transferred to the Open Stick Community.
Check the LICENSE of each design for details on how the design can be used.