@angular-material-extensions/google-maps-autocomplete - Autocomplete input component for google-maps built with angular material design

Stating with v1.3.0, you can now use this library without material2's dependency! To enable this goolgle maps autocomplate api as feature, you can just add matGoogleMapsAutocomplete to any html input element!

Built by and for developers ❤️

Do you have any question or suggestion ? Please do not hesitate to contact us! Alternatively, provide a PR | open an appropriate issue here

If did you like this project, support angular-material-extensions by starring ⭐ and sharing it 📢

Demo

View all the directives and components in action at https://angular-material-extensions.github.io/google-maps-autocomplete

Dependencies

Angular (requires Angular 2 or higher)

for the directive as standalone you just need to install the agm core module

agm - angular google maps v1.0.0-beta.5

npm i @agm/core

optional

npm i -D @types/googlemaps

Installation

1. Install via ng add. (Recommended)

If Angular Material Design is not setup, just run ng add @angular/material learn more

Now add the library via the angular schematics and everything will be setup for you

ng add @angular-material-extensions/google-maps-autocomplete

2. Install via npm. (Alternative)

Now install @angular-material-extensions/google-maps-autocomplete via:

npm install --save @angular-material-extensions/google-maps-autocomplete

Requirements (peer dependencies):

for the ui input component, please consider to install the following packages

npm i @angular/cdk @angular/material @angular/animations @angular/forms

Additional requirements Theme (Material Design)

angular material theme

SystemJS

Note:If you are using SystemJS, you should adjust your configuration to point to the UMD bundle. In your systemjs config file, map needs to tell the System loader where to look for @angular-material-extensions/google-maps-autocomplete:

{
  '@angular-material-extensions/google-maps-autocomplete';: 'node_modules/@angular-material-extensions/google-maps-autocomplete/bundles/google-maps-autocomplete.umd.js',
}

Once installed you need to import the main module:

import { MatGoogleMapsAutocompleteModule } from '@angular-material-extensions/google-maps-autocomplete';

The only remaining part is to list the imported module in your application module. The exact method will be slightly different for the root (top-level) module for which you should end up with the code similar to (notice MatGoogleMapsAutocompleteModule.forRoot()):

import { AgmCoreModule } from '@agm/core';
import { MatGoogleMapsAutocompleteModule } from '@angular-material-extensions/google-maps-autocomplete';

@NgModule({
  declarations: [AppComponent, ...],
  imports: [
     // important !!!
     AgmCoreModule.forRoot({
          apiKey: 'YOUR_KEY',
          libraries: ['places']
        }),
     MatGoogleMapsAutocompleteModule.forRoot(), ...],  
  bootstrap: [AppComponent]
})
export class AppModule {
}

Other modules in your application can simply import MatGoogleMapsAutocompleteModule:

import { MatGoogleMapsAutocompleteModule } from '@angular-material-extensions/google-maps-autocomplete';

@NgModule({
  declarations: [OtherComponent, ...],
  imports: [
     MatGoogleMapsAutocompleteModule, ...], 
})
export class OtherModule {
}

Usage

As directive

add matGoogleMapsAutocomplete to your target html input element to enable the google maps autocomplete api as feature

<mat-form-field>
  <mat-label>Address << using the directive >></mat-label>
  <input matInput
       matGoogleMapsAutocomplete
       [country]="de"
       (onAutocompleteSelected)="onAutocompleteSelected($event)"
       (onLocationSelected)="onLocationSelected($event)">
</mat-form-field>

As components

or alternatively use `mat-google-maps-auto-complete`, the UI wrapper

add mat-google-maps-auto-complete element to your template

`mat-google-maps-auto-complete`

<mat-google-maps-autocomplete [appearance]="appearance.OUTLINE"
                              (onAutocompleteSelected)="onAutocompleteSelected($event)"
                              (onLocationSelected)="onLocationSelected($event)">
      </mat-google-maps-autocomplete>

A customized mat-google-maps-autocomplete

<mat-google-maps-autocomplete  country="us"
                               type="address"
                               (onAutocompleteSelected)="onAutocompleteSelected($event)"
                               (onLocationSelected)="onLocationSelected($event)">
</mat-google-maps-autocomplete>

combine the result of the mat-google-maps-autocomplete with a google map instance via @agm

<div class="container" fxLayout="column" fxLayoutAlign="center">

    <div fxFlex>
      <agm-map [latitude]="latitude" [longitude]="longitude" [scrollwheel]="false" [zoom]="zoom">
        <agm-marker [latitude]="latitude" [longitude]="longitude"></agm-marker>
      </agm-map>
    </div>

    <div fxFlex fxFlexAlign="center"
         class="autocomplete-container"
         [ngStyle.xs]="{'min-width.%': 100}"
         [ngStyle.sm]="{'width.%': 70}">
      <mat-google-maps-autocomplete (onAutocompleteSelected)="onAutocompleteSelected($event)"
                                    (onLocationSelected)="onLocationSelected($event)"
                                    (onGermanAddressMapped)="onGermanAddressMapped($event)">
      </mat-google-maps-autocomplete>
    </div>

  </div>

in your component, the code will be similar to -->

import {Component, OnInit, ViewEncapsulation} from '@angular/core';
import {Title} from '@angular/platform-browser';
import {Location, Appearance, GermanAddress} from '@angular-material-extensions/google-maps-autocomplete';
import {} from '@types/googlemaps';
import PlaceResult = google.maps.places.PlaceResult;

@Component({
  selector: 'app-home',
  templateUrl: './home.component.html',
  styleUrls: ['./home.component.scss'],
  encapsulation: ViewEncapsulation.None,
})
export class HomeComponent implements OnInit {

  public appearance = Appearance;
  public zoom: number;
  public latitude: number;
  public longitude: number;
  public selectedAddress: PlaceResult;

  constructor(private titleService: Title) {
  }

  ngOnInit() {
    this.titleService.setTitle('Home | @angular-material-extensions/google-maps-autocomplete');

    this.zoom = 10;
    this.latitude = 52.520008;
    this.longitude = 13.404954;

    this.setCurrentPosition();

  }

  private setCurrentPosition() {
    if ('geolocation' in navigator) {
      navigator.geolocation.getCurrentPosition((position) => {
        this.latitude = position.coords.latitude;
        this.longitude = position.coords.longitude;
        this.zoom = 12;
      });
    }
  }

  onAutocompleteSelected(result: PlaceResult) {
    console.log('onAutocompleteSelected: ', result);
  }

  onLocationSelected(location: Location) {
    console.log('onLocationSelected: ', location);
    this.latitude = location.latitude;
    this.longitude = location.longitude;
  }

 onGermanAddressMapped($event: GermanAddress) {
    console.log('onGermanAddressMapped', $event);
  }

}

API - for more info please visit the official documentation Maps JavaScript API

`matGoogleMapsAutocomplete`

option	bind	type	default	description
address	`Input()`	PlaceResult	string;	-
country	`Input()`	string	string[];	-
placeIdOnly	`Input()`	boolean	-	can be used to instruct the Autocomplete widget to retrieve only Place IDs. On calling getPlace() on the Autocomplete object, the PlaceResult made available will only have the place id, types and name properties set. You can use the returned place ID with calls to the Places, Geocoding, Directions or Distance Matrix services.
strictBounds	`Input()`	boolean	-	is a boolean specifying whether the API must return only those places that are strictly within the region defined by the given bounds. The API does not return results outside this region even if they match the user input.
types	`Input()`	string[]	-	An array of types specifies an explicit type or a type collection, as listed in the supported types below. If nothing is specified, all types are returned. In general only a single type is allowed. The exception is that you can safely mix the geocode and establishment types, but note that this will have the same effect as specifying no types. Supported types are listed below.
type	`Input()`	string	-
autoCompleteOptions	`Input()`	AutocompleteOptions	-	all above inputs in one object! The passed data to this object will be merged with the input if they exists
onChange	`Output()`	PlaceResult	string	null
onAutocompleteSelected	`Output()`	PlaceResult	-	the event will be fired when a place has been selected via the google maps autocomplete component
onLocationSelected	`Output()`	Location	-	the event will be fired when a place has been selected via the google maps autocomplete component
onLocationSelected	`Output()`	GermanAddress	-	the event will be fired when a place has been selected and mapped to the german address interface

Supported Types

type	description
geocode	instructs the Places service to return only geocoding results, rather than business results.
address	instructs the Places service to return only geocoding results with a precise address.
establishment	instructs the Places service to return only business results.
regions	instructs the Places service to return any result matching the following types: locality, sublocality, postal_code, country, administrative_area1, administrative_area2
cities	instructs the Places service to return results that match either locality or administrative_area3.

`mat-google-maps-autocomplete`

everything included in matGoogleMapsAutocomplete + the following

option	bind	type	default	description
addressLabelText	`Input()`	string;	Address using the component	self explanatory
placeholderText	`Input()`	string;	Please enter the address	self explanatory
requiredErrorText	`Input()`	string;	The address is required	self explanatory
invalidErrorText	`Input()`	string;	The address is not valid	self explanatory
appearance	`Input()`	Appearance	string;	Appearance.STANDARD

`mat-search-google-maps-autocomplete`

option	bind	type	default	description
appearance	`Input()`	Appearance	string;	Appearance.STANDARD
searchAddressLabel	`Input()`	string;	`Search Address`	input label
streetNameLabel	`Input()`	string;	`Street`	input label
streetNumberLabel	`Input()`	string;	`Nr.`	input label
postalCodeLabel	`Input()`	string;	`PLZ`	input label
localityLabel	`Input()`	string;	`Locality`	input label
country	`Input()`	string	string[];	-
placeIdOnly	`Input()`	boolean	-	can be used to instruct the Autocomplete widget to retrieve only Place IDs. On calling getPlace() on the Autocomplete object, the PlaceResult made available will only have the place id, types and name properties set. You can use the returned place ID with calls to the Places, Geocoding, Directions or Distance Matrix services.
strictBounds	`Input()`	boolean	-	is a boolean specifying whether the API must return only those places that are strictly within the region defined by the given bounds. The API does not return results outside this region even if they match the user input.
types	`Input()`	string[]	-	An array of types specifies an explicit type or a type collection, as listed in the supported types below. If nothing is specified, all types are returned. In general only a single type is allowed. The exception is that you can safely mix the geocode and establishment types, but note that this will have the same effect as specifying no types. Supported types are listed below.
type	`Input()`	string	-
onGermanAddressMapped	`Output()`	EventEmitter	string;	Appearance.STANDARD

<mat-card>
   <mat-card-title>Auto Parse Address</mat-card-title>
   <mat-card-content>
     <!-- #######   here we go !! ######-->
     <mat-search-google-maps-autocomplete appearance="outline"
                                          country="de"
                                          (onGermanAddressMapped)="onGermanAddressMapped($event)">
     ></mat-search-google-maps-autocomplete>
   </mat-card-content>
</mat-card>

import {Appearance, GermanAddress, Location} from '@angular-material-extensions/google-maps-autocomplete';

 onGermanAddressMapped($event;: GermanAddress;) {
    console.log('onGermanAddressMapped', $event);
  }

Documentation

Please checkout the full documentation here or follow the official tutorial

Run Demo App Locally

clone this repo by running

$ git clone https://github.com/angular-material-extensions/google-maps-autocomplete.git

link the @angular-material-extensions/google-maps-autocomplete package

$ gulp link

navigate to the demo app directory, install the dependencies and serve the app

$ cd demo && npm i && npm start

the app is now hosted by http://localhost:4200/

Development

clone this repo
Install the dependencies by running npm i
go to lib directory under projects/angular-material-extensions/google-maps-autocomplete
build the library npm run build

Name		Name	Last commit message	Last commit date
Latest commit History 207 Commits
.circleci		.circleci
.github		.github
assets		assets
config		config
e2e		e2e
projects/angular-material-extensions/google-maps-autocomplete		projects/angular-material-extensions/google-maps-autocomplete
src		src
.babelrc		.babelrc
.editorconfig		.editorconfig
.gitignore		.gitignore
.travis.yml		.travis.yml
CHANGELOG.md		CHANGELOG.md
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
README.md		README.md
angular.json		angular.json
browserslist		browserslist
commitlint.config.js		commitlint.config.js
greenkeeper.json		greenkeeper.json
package-lock.json		package-lock.json
package.json		package.json
prerender.ts		prerender.ts
server.ts		server.ts
static.paths.ts		static.paths.ts
tsconfig.app.json		tsconfig.app.json
tsconfig.json		tsconfig.json
tsconfig.server.json		tsconfig.server.json
tsconfig.spec.json		tsconfig.spec.json
tslint.json		tslint.json
webpack.server.config.js		webpack.server.config.js

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

@angular-material-extensions/google-maps-autocomplete - Autocomplete input component for google-maps built with angular material design

Built by and for developers ❤️

Table of Contents

Demo

Dependencies

Installation

1. Install via ng add. (Recommended)

2. Install via npm. (Alternative)

Requirements (peer dependencies):

Additional requirements Theme (Material Design)

SystemJS

Usage

As directive

As components

or alternatively use `mat-google-maps-auto-complete`, the UI wrapper

`mat-google-maps-auto-complete`

API - for more info please visit the official documentation Maps JavaScript API

`matGoogleMapsAutocomplete`

Supported Types

`mat-google-maps-autocomplete`

`mat-search-google-maps-autocomplete`

Documentation

Run Demo App Locally

Development

Other Angular Libraries

Support

License

About

Releases

Packages

Languages

License

DEG-7/google-maps-autocomplete

Folders and files

Latest commit

History

Repository files navigation

@angular-material-extensions/google-maps-autocomplete - Autocomplete input component for google-maps built with angular material design

Built by and for developers ❤️

Table of Contents

Demo

Dependencies

Installation

1. Install via ng add. (Recommended)

2. Install via npm. (Alternative)

Requirements (peer dependencies):

Additional requirements Theme (Material Design)

SystemJS

Usage

As directive

As components

or alternatively use mat-google-maps-auto-complete, the UI wrapper

mat-google-maps-auto-complete

API - for more info please visit the official documentation Maps JavaScript API

matGoogleMapsAutocomplete

Supported Types

mat-google-maps-autocomplete

mat-search-google-maps-autocomplete

Documentation

Run Demo App Locally

Development

Other Angular Libraries

Support

License

About

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

Packages 0

Languages

or alternatively use `mat-google-maps-auto-complete`, the UI wrapper

`mat-google-maps-auto-complete`

`matGoogleMapsAutocomplete`

`mat-google-maps-autocomplete`

`mat-search-google-maps-autocomplete`

Packages