Skip to content

DOI-USGS/knoten

Repository files navigation

Knoten

Knoten

A library to leverage python wrapped Community Sensor Models (CSMs) for common spatial/sensor operations and testing.

References:


Overview

We currently use Knoten to help test our supported CSM implementations against well established ISIS3 camera models. In short, The CSM standard, now at version 3.0.3, is a framework that provides a well-defined application program interface (API) for multiple types of sensors and has been widely adopted by remote sensing software systems (e.g. BAE's Socet GXP, Harris Corp.'s ENVI, Hexagon's ERDAS Imagine, and recently added to the NASA AMES Stereo Pipeline [ASP]). Our support for CSM is explained in this abstract and a recently submitted paper (not yet available). Currently, we support Framing and Pushbroom (line scanner) types of sensor models in the usgscsm library.

A secondary requirement for our CSM implementation requires an ALE-generated Image Support Data (ISD). ISDs contain the SPICE-derived positional (and when needed velocity) description for each image. You can find several generated JSON-formatted examples here

Please see the status report below for the current instruments we have implemented and how well they match our ISIS3 camera models. In the near future, we will continue to address the pixel offsets we currently see. Both the CSM implementations (usgscsm) and ALE are currently in active development and both will be updated as needed to decrease these errors. Thus, none of the instruments have been tested enough for full production use.


Installing

You can install the latest build via conda.

conda install -c usgs-astrogeology -c conda-forge knoten

You can also do a local install using the following steps within a clone of the repository.

  1. Install the dependencies.
    Note: creating the environment may take around and hour. If conda is too slow, try using mamba instead.

    conda env create -f environment.yml
    
  2. Install the package

    python setup.py install
    

Building Docs

To build the docs:

  1. Open the docs directory: cd docs

  2. Create (if not existing) and activate the environment (or use the main knoten environment if it is already created).

    conda env create -f environment.yml #If it does not exist already
    conda activate knoten-docs
  3. Run sphinx-build -b html . public to build the docs in the docs/public directory (or change "public" to a subdirectory name of your choosing).

  4. Browse to the index.html file in docs/public to open the docs. If needed, run a utility like http-server in the docs/public directory to serve the docs on localhost.