GitHub - ECSIM/opem: OPEM (Open Source PEM Fuel Cell Simulation Tool)

Overview

Modeling and simulation of proton-exchange membrane fuel cells (PEMFC) may work as a powerful tool in the research & development of renewable energy sources. The Open-Source PEMFC Simulation Tool (OPEM) is a modeling tool for evaluating the performance of proton exchange membrane fuel cells. This package is a combination of models (static/dynamic) that predict the optimum operating parameters of PEMFC. OPEM contained generic models that will accept as input, not only values of the operating variables such as anode and cathode feed gas, pressure and compositions, cell temperature and current density, but also cell parameters including the active area and membrane thickness. In addition, some of the different models of PEMFC that have been proposed in the OPEM, just focus on one particular FC stack, and some others take into account a part or all auxiliaries such as reformers. OPEM is a platform for collaborative development of PEMFC models.

Fig1. OPEM Block Diagram

Open Hub
PyPI Counter
Github Stars

Branch	master	develop
CI

Code Quality

Usage

Executable

Open CMD (Windows) or Terminal (UNIX)
Run opem or python -m opem (or run OPEM.exe)

Enter PEM cell parameters (or run standard test vectors)

Amphlett Static Model

Input	Description	Unit
T	Cell operation temperature	K
PH2	Partial pressure	atm
PO2	Partial pressure	atm
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A
A	Active area	cm^2
l	Membrane thickness	cm
lambda	An adjustable parameter with a min value of 14 and max value of 23	--
R(*Optional)	R-Electronic	ohm
JMax	Maximum current density	A/(cm^2)
N	Number of single cells	--

* For more information about this model visit here

Larminie-Dicks Static Model

Input	Description	Unit
E0	Fuel cell reversible no loss voltage	V
A	The slope of the Tafel line	V
T	Cell operation temperature	K
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A
i_n	Internal current	A
i_0	Exchange current at which the overvoltage begins to move from zero	A
i_L	Limiting current	A
RM	The membrane and contact resistances	ohm
N	Number of single cells	--

* For more information about this model visit here

Chamberline-Kim Static Model

Input	Description	Unit
E0	Open circuit voltage	V
b	Tafel's parameter for the oxygen reduction	V
R	Resistance	ohm.cm^2
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A
A	Active area	cm^2
m	Diffusion's parameters	V
n	Diffusion's parameters	(A^-1)(cm^2)
N	Number of single cells	--

* For more information about this model visit here

Padulles Dynamic Model I

Input	Description	Unit
E0	No load voltage	V
T	Fuel cell temperature	K
KH2	Hydrogen valve constant	kmol.s^(-1).atm^(-1)
KO2	Oxygen valve constant	kmol.s^(-1).atm^(-1)
tH2	Hydrogen time constant	s
tO2	Oxygen time constant	s
B	Activation voltage constant	V
C	Activation constant parameter	A^(-1)
Rint	Fuel cell internal resistance	ohm
rho	Hydrogen-Oxygen flow ratio	--
qH2	Molar flow of hydrogen	kmol/s
N0	Number of cells	--
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A

* For more information about this model visit here

Padulles Dynamic Model II

Input	Description	Unit
E0	No load voltage	V
T	Fuel cell temperature	K
KH2	Hydrogen valve constant	kmol.s^(-1).atm^(-1)
KH2O	Water valve constant	kmol.s^(-1).atm^(-1)
KO2	Oxygen valve constant	kmol.s^(-1).atm^(-1)
tH2	Hydrogen time constant	s
tH2O	Water time constant	s
tO2	Oxygen time constant	s
B	Activation voltage constant	V
C	Activation constant parameter	A^(-1)
Rint	Fuel cell internal resistance	ohm
rho	Hydrogen-Oxygen flow ratio	--
qH2	Molar flow of hydrogen	kmol/s
N0	Number of cells	--
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A

* For more information about this model visit here

Padulles-Hauer Dynamic Model

Input	Description	Unit
E0	No load voltage	V
T	Fuel cell temperature	K
KH2	Hydrogen valve constant	kmol.s^(-1).atm^(-1)
KH2O	Water valve constant	kmol.s^(-1).atm^(-1)
KO2	Oxygen valve constant	kmol.s^(-1).atm^(-1)
tH2	Hydrogen time constant	s
tH2O	Water time constant	s
tO2	Oxygen time constant	s
t1	Reformer time constant	s
t2	Reformer time constant	s
B	Activation voltage constant	V
C	Activation constant parameter	A^(-1)
CV	Conversion factor	--
Rint	Fuel cell internal resistance	ohm
rho	Hydrogen-Oxygen flow ratio	--
qMethanol	Molar flow of methanol	kmol/s
N0	Number of cells	--
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A

* For more information about this model visit here

Padulles-Amphlett Dynamic Model

Input	Description	Unit
E0	No load voltage	V
T	Fuel cell temperature	K
KH2	Hydrogen valve constant	kmol.s^(-1).atm^(-1)
KH2O	Water valve constant	kmol.s^(-1).atm^(-1)
KO2	Oxygen valve constant	kmol.s^(-1).atm^(-1)
tH2	Hydrogen time constant	s
tH2O	Water time constant	s
tO2	Oxygen time constant	s
t1	Reformer time constant	s
t2	Reformer time constant	s
A	Active area	cm^2
l	Membrane thickness	cm
lambda	An adjustable parameter with a min value of 14 and max value of 23	--
R(*Optional)	R-Electronic	ohm
JMax	Maximum current density	A/(cm^2)
CV	Conversion factor	--
rho	Hydrogen-Oxygen flow ratio	--
qMethanol	Molar flow of methanol	kmol/s
N0	Number of cells	--
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A

* For more information about this model visit here

Chakraborty Dynamic Model

Input	Description	Unit
E0	No load voltage	V
T	Cell operation temperature	K
KH2	Hydrogen valve constant	kmol.s^(-1).atm^(-1)
KH2O	Water valve constant	kmol.s^(-1).atm^(-1)
KO2	Oxygen valve constant	kmol.s^(-1).atm^(-1)
rho	Hydrogen-Oxygen flow ratio	--
Rint	Fuel cell internal resistance	ohm
N0	Number of cells	--
u	Fuel utilization ratio	--
i-start	Cell operating current start point	A
i-step	Cell operating current step	A
i-stop	Cell operating current end point	A

* For more information about this model visit here

Find your reports in Model_Name folder

Screen Record

Library

Amphlett Static Model

>>> from opem.Static.Amphlett import Static_Analysis
>>> Test_Vector={"T": 343.15,"PH2": 1,"PO2": 1,"i-start": 0,"i-stop": 75,"i-step": 0.1,"A": 50.6,"l": 0.0178,"lambda": 23,"N": 1,"R": 0,"JMax": 1.5,"Name": "Amphlett_Test"}
>>> data=Static_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
Ph	Thermal power	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
Eta_Active	Eta activation	List
Eta_Conc	Eta concentration	List
Eta_Ohmic	Eta ohmic	List
VE	Estimated FC voltage	List

For more information about this model visit here

Larminie-Dicks Static Model

>>> from opem.Static.Larminie_Dicks import Static_Analysis
>>> Test_Vector = {"A": 0.06,"E0": 1.178,"T": 328.15,"RM": 0.0018,"i_0": 0.00654,"i_L": 100.0,"i_n": 0.23,"N": 23,"i-start": 0.1,"i-stop": 98,"i-step": 0.1,"Name": "Larminiee_Test"}
>>> data=Static_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
Ph	Thermal power	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
VE	Estimated FC voltage	List

For more information about this model visit here

Chamberline-Kim Static Model

>>> from opem.Static.Chamberline_Kim import Static_Analysis
>>> Test_Vector = {"A": 50.0,"E0": 0.982,"b": 0.0689,"R": 0.328,"m": 0.000125,"n": 9.45,"N": 1,"i-start": 1,"i-stop": 42.5,"i-step": 0.1,"Name": "Chamberline_Test"}
>>> data=Static_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
Ph	Thermal power	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
VE	Estimated FC voltage	List

For more information about this model visit here

Padulles Dynamic Model I

>>> from opem.Dynamic.Padulles1 import Dynamic_Analysis
>>> Test_Vector = {"T": 343,"E0": 0.6,"N0": 88,"KO2": 0.0000211,"KH2": 0.0000422,"tH2": 3.37,"tO2": 6.74,"B": 0.04777,"C": 0.0136,"Rint": 0.00303,"rho": 1.168,"qH2": 0.0004,"i-start": 0,"i-stop": 100,"i-step": 0.1,"Name": "PadullesI_Test"}
>>> data=Dynamic_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
PO2	Partial pressure	List
PH2	Partial pressure	List
Ph	Thermal power	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
VE	Estimated FC voltage	List

For more information about this model visit here

Padulles Dynamic Model II

>>> from opem.Dynamic.Padulles2 import Dynamic_Analysis
>>> Test_Vector = {"T": 343,"E0": 0.6,"N0": 5,"KO2": 0.0000211,"KH2": 0.0000422,"KH2O": 0.000007716,"tH2": 3.37,"tO2": 6.74,"tH2O": 18.418,"B": 0.04777,"C": 0.0136,"Rint": 0.00303,"rho": 1.168,"qH2": 0.0004,"i-start": 0.1,"i-stop": 100,"i-step": 0.1,"Name": "Padulles2_Test"}
>>> data=Dynamic_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
PO2	Partial pressure	List
PH2	Partial pressure	List
PH2O	Partial pressure	List
Ph	Thermal power	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
VE	Estimated FC voltage	List

For more information about this model visit here

Padulles-Hauer Dynamic Model

>>> from opem.Dynamic.Padulles_Hauer import Dynamic_Analysis
>>> Test_Vector = {"T": 343,"E0": 0.6,"N0": 5,"KO2": 0.0000211,"KH2": 0.0000422,"KH2O": 0.000007716,"tH2": 3.37,"tO2": 6.74,"t1": 2,"t2": 2,"tH2O": 18.418,"B": 0.04777,"C": 0.0136,"Rint": 0.00303,"rho": 1.168,"qMethanol": 0.0002,"CV": 2,"i-start": 0.1,"i-stop": 100,"i-step": 0.1,"Name": "Padulles_Hauer_Test"}
>>> data=Dynamic_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
PO2	Partial pressure	List
PH2	Partial pressure	List
PH2O	Partial pressure	List
Ph	Thermal power	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
VE	Estimated FC voltage	List

For more information about this model visit here

Padulles-Amphlett Dynamic Model

>>> from opem.Dynamic.Padulles_Amphlett import Dynamic_Analysis
>>> Test_Vector = {"A": 50.6,"l": 0.0178,"lambda": 23,"JMax": 1.5,"T": 343,"N0": 5,"KO2": 0.0000211,"KH2": 0.0000422,"KH2O": 0.000007716,"tH2": 3.37,"tO2": 6.74,"t1": 2,"t2": 2,"tH2O": 18.418,"rho": 1.168,"qMethanol": 0.0002,"CV": 2,"i-start": 0.1,"i-stop": 75,"i-step": 0.1,"Name": "Padulles_Amphlett_Test"}
>>> data=Dynamic_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
PO2	Partial pressure	List
PH2	Partial pressure	List
PH2O	Partial pressure	List
Ph	Thermal power	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
Eta_Active	Eta activation	List
Eta_Conc	Eta concentration	List
Eta_Ohmic	Eta ohmic	List
VE	Estimated FC voltage	List

For more information about this model visit here

Chakraborty Dynamic Model

>>> from opem.Dynamic.Chakraborty import Dynamic_Analysis
>>> Test_Vector = {"T": 1273,"E0": 0.6,"u":0.8,"N0": 1,"R": 3.28125 * 10**(-3),"KH2O": 0.000281,"KH2": 0.000843,"KO2": 0.00252,"rho": 1.145,"i-start": 0.1,"i-stop": 300,"i-step": 0.1,"Name": "Chakraborty_Test"}
>>> data=Dynamic_Analysis(InputMethod=Test_Vector,TestMode=True,PrintMode=False,ReportMode=False)

Key	Description	Type
Status	Simulation status	Bool
P	Power	List
I	Cell operating current	List
V	FC voltage	List
EFF	Efficiency	List
PO2	Partial pressure	List
PH2	Partial pressure	List
PH2O	Partial pressure	List
Ph	Thermal power	List
Nernst Gain	Nernst Gain	List
Ohmic Loss	Ohmic Loss	List
V0	Linear-Apx intercept	Float
K	Linear-Apx slope	Float
VE	Estimated FC voltage	List

For more information about this model visit here

Parameters

TestMode : Active test mode and get/return data as dict, (Default : False)
ReportMode : Generate reports(.csv,.opem,.html) and print result in console, (Default : True)
PrintMode : Control printing in console, (Default : True)
Folder : Reports folder, (Default : os.getcwd())

Note

Return type : dict

Telegram Bot

Send /start command to OPEM BOT
Choose models from menu
Send your test vector according to the template
Download your results

Try OPEM in Your Browser!

OPEM can be used online in interactive Jupyter Notebooks via the Binder service! Try it out now! :

Check .ipynb files in Documents folder
Edit and execute each part of the notes, step by step from the top panel by run button
For executing a complete simulation, you can edit Test_Vector in Full Run section

Issues & Bug Reports

Just fill an issue and describe it. We'll check it ASAP! or send an email to opem@ecsim.site.

You can also join our discord server

Outputs

Thanks

Reference

1- J. C. Amphlett, R. M. Baumert, R. F. Mann, B. A. Peppley, and P. R. Roberge. 1995. "Performance Modeling of the Ballard Mark IV Solid Polymer Electrolyte Fuel Cell." J. Electrochem. Soc. (The Electrochemical Society, Inc.) 142 (1): 9-15. doi: 10.1149/1.2043959.

2- Jeferson M. Correa, Felix A. Farret, Vladimir A. Popov, Marcelo G. Simoes. 2005. "Sensitivity Analysis of the Modeling Parameters Used in Simulation of Proton Exchange Membrane Fuel Cells." IEEE Transactions on Energy Conversion (IEEE) 20 (1): 211-218. doi:10.1109/TEC.2004.842382.

3- Junbom Kim, Seong-Min Lee, Supramaniam Srinivasan, Charles E. Chamberlin. 1995. "Modeling of Proton Exchange Membrane Fuel Cell Performance with an Empirical Equation." Journal of The Electrochemical Society (The Electrochemical Society) 142 (8): 2670-2674. doi:10.1149/1.2050072.

4- I. Sadli, P. Thounthong, J.-P. Martin, S. Rael, B. Davat. 2006. "Behaviour of a PEMFC supplying a low voltage static converter." Journal of Power Sources (Elsevier) 156: 119–125. doi:10.1016/j.jpowsour.2005.08.021.

5- J. Padulles, G.W. Ault, J.R. McDonald. 2000. "An integrated SOFC plant dynamic model for power systems simulation." Journal of Power Sources (Elsevier) 86 (1-2): 495-500. doi:10.1016/S0378-7753(99)00430-9.

6- Hauer, K.-H. 2001. "Analysis tool for fuel cell vehicle hardware and software (controls) with an application to fuel economy comparisons of alternative system designs." Ph.D. dissertation, Transportation Technology and Policy, University of California Davis.

7- A. Saadi, M. Becherif, A. Aboubou, M.Y. Ayad. 2013. "Comparison of proton exchange membrane fuel cell static models." Renewable Energy (Elsevier) 56: 64-71. doi:dx.doi.org/10.1016/j.renene.2012.10.012.

8- Diego Feroldi, Marta Basualdo. 2012. "Description of PEM Fuel Cells System." Green Energy and Technology (Springer) 49-72. doi:10.1007/978-1-84996-184-4_2

9- Gottesfeld, Shimshon. n.d. The Polymer Electrolyte Fuel Cell: Materials Issues in a Hydrogen Fueled Power Source. http://physics.oregonstate.edu/~hetheriw/energy/topics/doc/electrochemistry/fc/basic/The_Polymer_Electrolyte_Fuel_Cell.htm

10- Mohamed Becherif, Aïcha Saadi, Daniel Hissel, Abdennacer Aboubou, Mohamed Yacine Ayad. 2011. "Static and dynamic proton exchange membrane fuel cell models." Journal of Hydrocarbons Mines and Environmental Research 2 (1)

11- Larminie, J., Dicks, A., & McDonald, M. S. 2003. Fuel cell systems explained (Vol. 2, pp. 207-225). Chichester, UK: J. Wiley. doi: 10.1002/9781118706992.

12- Rho, Y. W., Srinivasan, S., & Kho, Y. T. 1994. ''Mass transport phenomena in proton exchange membrane fuel cells using o 2/he, o 2/ar, and o 2/n 2 mixtures ii. Theoretical analysis.'' Journal of the Electrochemical Society, 141(8), 2089-2096. doi: 10.1149/1.2055066.

13- U. Chakraborty, A New Model for Constant Fuel Utilization and Constant Fuel Flow in Fuel Cells, Appl. Sci. 9 (2019) 1066. https://doi.org/10.3390/app9061066.

Cite

If you use OPEM in your research , please cite this paper :

@article{Haghighi2018,
  doi = {10.21105/joss.00676},
  url = {https://doi.org/10.21105/joss.00676},
  year  = {2018},
  month = {jul},
  publisher = {The Open Journal},
  volume = {3},
  number = {27},
  pages = {676},
  author = {Sepand Haghighi and Kasra Askari and Sarmin Hamidi and Mohammad Mahdi Rahimi},
  title = {{OPEM} : Open Source {PEM} Cell Simulation Tool},
  journal = {Journal of Open Source Software}
}

Download OPEM.bib(BibTeX Format)

JOSS
Zenodo

Show Your Support

Star This Repo

Give a ⭐️ if this project helped you!

Donate to Our Project

If you do like our project and we hope that you do, can you please support us? Our project is not and is never going to be working for profit. We need the money just so we can continue doing what we do ;-) .

Name		Name	Last commit message	Last commit date
Latest commit History 1,193 Commits
.github		.github
Documents		Documents
MATLAB		MATLAB
docker		docker
opem		opem
otherfile		otherfile
paper		paper
test		test
.coveragerc		.coveragerc
.gitattributes		.gitattributes
.gitignore		.gitignore
AUTHORS.md		AUTHORS.md
CHANGELOG.md		CHANGELOG.md
INSTALL.md		INSTALL.md
LICENSE		LICENSE
MANIFEST.in		MANIFEST.in
OPEM.spec		OPEM.spec
README.md		README.md
autopep8.bat		autopep8.bat
autopep8.sh		autopep8.sh
build_exe.bat		build_exe.bat
build_unix.sh		build_unix.sh
codecov.yml		codecov.yml
dev-requirements.txt		dev-requirements.txt
pytest.ini		pytest.ini
requirements.txt		requirements.txt
setup.py		setup.py

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Table of Contents

Overview

Usage

Executable

Screen Record

Library

Parameters

Note

Telegram Bot

Try OPEM in Your Browser!

Issues & Bug Reports

Outputs

Thanks

Reference

Cite

Show Your Support

Star This Repo

Donate to Our Project

About

Releases 14

Sponsor this project

Packages

Contributors 9

Languages

License

ECSIM/opem

Folders and files

Latest commit

History

Repository files navigation

Table of Contents

Overview

Usage

Executable

Screen Record

Library

Parameters

Note

Telegram Bot

Try OPEM in Your Browser!

Issues & Bug Reports

Outputs

Thanks

Reference

Cite

Show Your Support

Star This Repo

Donate to Our Project

About

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases 14

Sponsor this project

Packages 0

Contributors 9

Languages

Packages