docs(vpc): fix docs of vpc service (#1021)

docs/data-sources/networking_port.md

@@ -4,7 +4,7 @@ subcategory: "Virtual Private Cloud (VPC)"
 
 # flexibleengine_networking_port
 
-Use this data source to get the ID of an available Flexibleengine port.
+Use this data source to get the ID of an available FlexibleEngine port.
 
 ## Example Usage
 
@@ -40,12 +40,12 @@ In addition to all arguments above, the following attributes are exported:
 
 * `name` - The name of the port.
 
-* `admin_state_up` - The administrative state of the port.
-
 * `device_owner` - The device owner of the port.
 
 * `device_id` - The ID of the device the port belongs to.
 
+* `all_allowed_ips` - The collection of allowed IP addresses on the port.
+
 * `all_fixed_ips` - The collection of Fixed IP addresses on the port.
 
 * `all_security_group_ids` - The collection of security group IDs applied on the port.

docs/data-sources/vpc_peering_connection_v2.md

@@ -27,18 +27,24 @@ resource "flexibleengine_vpc_route_v2" "vpc_route" {
 The arguments of this data source act as filters for querying the available VPC peering connection.
 The given filters must match exactly one VPC peering connection whose data will be exported as attributes.
 
-* `id` (Optional) - The ID of the specific VPC Peering Connection to retrieve.
+* `region` - (Optional, String) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
 
-* `status` (Optional) - The status of the specific VPC Peering Connection to retrieve.
+* `id` (Optional, String) - The ID of the specific VPC Peering Connection to retrieve.
 
-* `vpc_id` (Optional) - The ID of the requester VPC of the specific VPC Peering Connection to retrieve.
+* `name` (Optional, String) - The name of the specific VPC Peering Connection to retrieve.
 
-* `peer_vpc_id` (Optional) -  The ID of the accepter/peer VPC of the specific VPC Peering Connection to retrieve.
+* `status` (Optional, String) - The status of the specific VPC Peering Connection to retrieve.
 
-* `peer_tenant_id` (Optional) - The Tenant ID of the accepter/peer VPC of the specific VPC Peering Connection to retrieve.
+* `vpc_id` (Optional, String) - The ID of the requester VPC of the specific VPC Peering Connection to retrieve.
 
-* `name` (Optional) - The name of the specific VPC Peering Connection to retrieve.
+* `peer_vpc_id` (Optional, String) -  The ID of the accepter/peer VPC of the specific VPC Peering Connection to retrieve.
+
+* `peer_tenant_id` (Optional, String) - The Tenant ID of the accepter/peer VPC
+  of the specific VPC Peering Connection to retrieve.
 
 ## Attributes Reference
 
+* `description` - The description of the VPC Peering Connection.
+
 All of the argument attributes are exported as result attributes.

docs/data-sources/vpc_route_ids_v2.md

@@ -31,7 +31,10 @@ output "route_nexthop" {
 
 ## Argument Reference
 
-* `vpc_id` (Required) - The VPC ID that you want to filter from.
+* `region` - (Optional, String) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
+
+* `vpc_id` (Required, String) - The VPC ID that you want to filter from.
 
 ## Attributes Reference
 

docs/data-sources/vpc_route_v2.md

@@ -32,15 +32,18 @@ The arguments of this data source act as filters for querying the available
 routes in the current tenant. The given filters must match exactly one
 route whose data will be exported as attributes.
 
-* `id` (Optional) - The id of the specific route to retrieve.
+* `region` - (Optional, String) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
 
-* `vpc_id` (Optional) - The id of the VPC that the desired route belongs to.
+* `id` (Optional, String) - The id of the specific route to retrieve.
 
-* `destination` (Optional) - The route destination address (CIDR).
+* `vpc_id` (Optional, String) - The id of the VPC that the desired route belongs to.
 
-* `tenant_id` (Optional) - Only the administrator can specify the tenant ID of other tenants.
+* `destination` (Optional, String) - The route destination address (CIDR).
 
-* `type` (Optional) - Route type for filtering.
+* `tenant_id` (Optional, String) - Only the administrator can specify the tenant ID of other tenants.
+
+* `type` (Optional, String) - Route type for filtering.
 
 ## Attribute Reference
 

docs/data-sources/vpc_subnet_ids_v1.md

@@ -31,10 +31,15 @@ output "subnet_cidr_blocks" {
 
 The following arguments are supported:
 
-* `vpc_id` (Required) - Specifies the VPC ID used as the query filter.
+* `region` - (Optional, String) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
+
+* `vpc_id` (Required, String) - Specifies the VPC ID used as the query filter.
 
 ## Attributes Reference
 
 The following attributes are exported:
 
+* `id` - Specifies a data source ID in UUID format.
+
 * `ids` - A list of all the subnet ids found. This data source will fail if none are found.

docs/data-sources/vpc_subnet_v1.md

@@ -28,23 +28,28 @@ The arguments of this data source act as filters for querying the available
 subnets in the current tenant. The given filters must match exactly one
 subnet whose data will be exported as attributes.
 
-* `id` - (Optional) - Specifies the ID in UUID format.
+* `region` - (Optional, String) The region in which to obtain the V1 VPC client. A VPC client is needed to retrieve VPCs.
+  If omitted, the region argument of the provider is used.
 
-* `name` (Optional) - The name of the specific subnet to retrieve.
+* `id` - (Optional, String) - Specifies the ID in UUID format.
 
-* `cidr` (Optional) - The network segment of specific subnet to retrieve. The value must be in CIDR format.
+* `name` (Optional, String) - The name of the specific subnet to retrieve.
 
-* `status` (Optional) - The value can be ACTIVE, DOWN, UNKNOWN, or ERROR.
+* `cidr` (Optional, String) - The network segment of specific subnet to retrieve. The value must be in CIDR format.
 
-* `vpc_id` (Optional) - The id of the VPC that the desired subnet belongs to.
+* `status` (Optional, String) - The value can be ACTIVE, DOWN, UNKNOWN, or ERROR.
 
-* `gateway_ip` (Optional) - The subnet gateway address of specific subnet.
+* `vpc_id` (Optional, String) - The id of the VPC that the desired subnet belongs to.
 
-* `primary_dns` (Optional) - The IP address of DNS server 1 on the specific subnet.
+* `gateway_ip` (Optional, String) - The subnet gateway address of specific subnet.
 
-* `secondary_dns` (Optional) - The IP address of DNS server 2 on the specific subnet.
+* `primary_dns` (Optional, String) - The IP address of DNS server 1 on the specific subnet.
 
-* `availability_zone` (Optional) - The availability zone (AZ) to which the subnet should belong.
+* `secondary_dns` (Optional, String) - The IP address of DNS server 2 on the specific subnet.
+
+* `availability_zone` (Optional, String) - The availability zone (AZ) to which the subnet should belong.
+
+* `description` - The description of the subnet.
 
 ## **Attributes Reference**
 

docs/data-sources/vpc_v1.md

@@ -57,3 +57,7 @@ The following attributes are exported:
 * `shared` - Specifies whether the cross-tenant sharing is supported.
 
 * `region` - See Argument Reference above.
+
+* `routes.destination` - The destination network segment of a route.
+
+* `routes.nexthop` - The next hop of a route.

docs/data-sources/vpcep_endpoints.md

@@ -50,6 +50,9 @@ The `endpoints` block contains:
 * `whitelist` - List of IP or CIDR block which can access the VPC endpoint.
 * `private_domain_name` - DNS name pointing to the VPC endpoint ip.
 * `tags` - The key/value pairs to associate with the VPC endpoint.
+    + `key` - The tag key. Each tag key contains a maximum of 127 unicode characters but cannot be left blank.
+    + `value` - The tag value list. Each value contains a maximum of 255 Unicode characters.
+      Before using values, delete SBC spaces before and after the value.
 * `project_id` - The ID of the project holding the VPC endpoint.
 * `created_at` - Creation date of the VPC endpoint.
 * `updated_at` - Last update date of the VPC endpoint.

docs/data-sources/vpcep_public_services.md

@@ -19,6 +19,9 @@ data "flexibleengine_vpcep_public_services" "dns_service" {
 
 ## Argument Reference
 
+* `region` - (Optional, String) The region in which to obtain the public VPC endpoint services.
+  If omitted, the provider-level region will be used.
+
 * `service_name` - (Optional, String) Specifies the name of the public VPC endpoint service.
     The value is not case-sensitive and supports fuzzy match.
 
@@ -30,8 +33,6 @@ In addition to all arguments above, the following attributes are exported:
 
 * `id` - Specifies a data source ID in UUID format.
 
-* `region` - The region in which to obtain the public VPC endpoint services.
-
 * `services` - Indicates the public VPC endpoint services information. Structure is documented below.
 
 The `services` block contains:

docs/resources/networking_secgroup_rule_v2.md

@@ -31,21 +31,21 @@ resource "flexibleengine_networking_secgroup_rule_v2" "secgroup_rule_1" {
 
 The following arguments are supported:
 
-* `region` - (Optional) The region in which to obtain the V2 networking client.
+* `region` - (Optional, String, ForceNew) The region in which to obtain the V2 networking client.
     A networking client is needed to create a port. If omitted, the
     `region` argument of the provider is used. Changing this creates a new
     security group rule.
 
-* `security_group_id` - (Required) The security group ID the rule should belong
+* `security_group_id` - (Required, String, ForceNew) The security group ID the rule should belong
     to. Changing this creates a new security group rule.
 
-* `direction` - (Required) The direction of the rule, valid values are **ingress**
+* `direction` - (Required, String, ForceNew) The direction of the rule, valid values are **ingress**
     or **egress**. Changing this creates a new security group rule.
 
-* `ethertype` - (Required) The layer 3 protocol type, valid values are **IPv4**
+* `ethertype` - (Required, String, ForceNew) The layer 3 protocol type, valid values are **IPv4**
     or **IPv6**. Changing this creates a new security group rule.
 
-* `protocol` - (Optional) The layer 4 protocol type, valid values are following.
+* `protocol` - (Optional, String, ForceNew) The layer 4 protocol type, valid values are following.
     Changing this creates a new security group rule. This is required if you want to specify a port range.
   + **tcp**
   + **udp**
@@ -69,22 +69,24 @@ The following arguments are supported:
   + **udplite**
   + **vrrp**
 
-* `port_range_min` - (Optional) The lower part of the allowed port range, valid
+* `port_range_min` - (Optional, Int, ForceNew) The lower part of the allowed port range, valid
     integer value needs to be between 1 and 65535. Changing this creates a new
     security group rule.
 
-* `port_range_max` - (Optional) The higher part of the allowed port range, valid
+* `port_range_max` - (Optional, Int, ForceNew) The higher part of the allowed port range, valid
     integer value needs to be between 1 and 65535. Changing this creates a new
     security group rule.
 
-* `remote_ip_prefix` - (Optional) The remote CIDR, the value needs to be a valid
+* `remote_ip_prefix` - (Optional, String, ForceNew) The remote CIDR, the value needs to be a valid
     CIDR (i.e. 192.168.0.0/16). Changing this creates a new security group rule.
 
-* `remote_group_id` - (Optional) The remote group id, the value needs to be an
+* `remote_group_id` - (Optional, String, ForceNew) The remote group id, the value needs to be an
     FlexibleEngine ID of a security group in the same tenant. Changing this creates
     a new security group rule.
 
-* `description` - (Optional) Specifies the supplementary information about the security group rule.
+* `tenant_id` - (Optional, String, ForceNew) The owner of the security group.
+
+* `description` - (Optional, String, ForceNew) Specifies the supplementary information about the security group rule.
   This parameter can contain a maximum of 255 characters and cannot contain angle brackets (< or >).
   Changing this creates a new security group rule.
 
@@ -94,6 +96,12 @@ In addition to all arguments above, the following attributes are exported:
 
 * `id` - The resource ID in UUID format.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `delete` - Default is 10 minute.
+
 ## Import
 
 Security Group Rules can be imported using the `id`, e.g.

docs/resources/networking_secgroup_v2.md

@@ -21,19 +21,21 @@ resource "flexibleengine_networking_secgroup_v2" "example_secgroup" {
 
 The following arguments are supported:
 
-* `region` - (Optional) The region in which to obtain the V2 networking client.
+* `region` - (Optional, String) The region in which to obtain the V2 networking client.
     A networking client is needed to create a port. If omitted, the
     `region` argument of the provider is used. Changing this creates a new
     security group.
 
-* `name` - (Required) A unique name for the security group.
+* `name` - (Required, String) A unique name for the security group.
 
-* `description` - (Optional) A unique name for the security group.
+* `description` - (Optional, String) A unique name for the security group.
 
-* `delete_default_rules` - (Optional) Whether or not to delete the default
+* `delete_default_rules` - (Optional, String) Whether or not to delete the default
     egress security rules. This is `false` by default. See the below note
     for more information.
 
+* `tenant_id` - (Optional, String, ForceNew) The owner of the security group.
+
 ## Attributes Reference
 
 In addition to all arguments above, the following attributes are exported:
@@ -68,6 +70,12 @@ behavior. Some FlexibleEngine clouds might provide additional rules and some mig
 not provide any rules at all (in which case the `delete_default_rules` setting
 is moot).
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `delete` - Default is 10 minute.
+
 ## Import
 
 Security Groups can be imported using the `id`, e.g.

docs/resources/vpc_flow_log_v1.md

@@ -69,10 +69,17 @@ In addition to all arguments above, the following attributes are exported:
 
 * `status` - The status of the flow log. The value can be `ACTIVE`, `DOWN` or `ERROR`.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.
+
 ## Import
 
 VPC flow logs can be imported using the `id`, e.g.
 
-```sh
+```shell
 terraform import flexibleengine_vpc_flow_log_v1.flowlog1 41b9d73f-eb1c-4795-a100-59a99b062513
 ```

docs/resources/vpc_peering_connection_accepter_v2.md

@@ -72,10 +72,13 @@ resource "flexibleengine_vpc_peering_connection_accepter_v2" "peer" {
 
 The following arguments are supported:
 
-* `vpc_peering_connection_id` (Required) - The VPC Peering Connection ID to manage.
+* `region` - (Optional, String, ForceNew) Specifies the region in which to create the VPC peering connection accepter.
+  If omitted, the provider-level region will be used. Changing this creates a new VPC peering connection accepter.
+
+* `vpc_peering_connection_id` (Required, String, ForceNew) - The VPC Peering Connection ID to manage.
   Changing this creates a new VPC peering connection accepter.
 
-* `accept` (Optional)- Whether or not to accept the peering request. Defaults to `false`.
+* `accept` (Optional, Bool)- Whether or not to accept the peering request. Defaults to `false`.
 
 ## Removing flexibleengine_vpc_peering_connection_accepter_v2 from your configuration
 
@@ -90,10 +93,10 @@ from your state file and management, but will not destroy the VPC Peering Connec
 
 All of the argument attributes except accept are also exported as result attributes.
 
-* `name` - The VPC peering connection name.
-
 * `id` - The VPC peering connection ID.
 
+* `name` - The VPC peering connection name.
+
 * `status` - The VPC peering connection status.
 
 * `vpc_id` - The ID of requester VPC involved in a VPC peering connection.
@@ -102,6 +105,13 @@ All of the argument attributes except accept are also exported as result attribu
 
 * `peer_tenant_id` - The Tenant Id of the accepter tenant.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.
+
 ## Import
 
 VPC Peering Connection Accepter can be imported using the VPC Peering Connection ID `vpc_peering_connection_id`, e.g.

docs/resources/vpc_peering_connection_v2.md

@@ -35,15 +35,20 @@ resource "flexibleengine_vpc_peering_connection_v2" "peering" {
 
 The following arguments are supported:
 
-* `name` (Required) - Specifies the name of the VPC peering connection. The value can contain 1 to 64 characters.
+* `region` - (Optional, String, ForceNew) Specifies the region in which to create the VPC peering connection.
+  If omitted, the provider-level region will be used. Changing this creates a new VPC peering connection.
 
-* `vpc_id` (Required) - Specifies the ID of a VPC involved in a VPC peering connection.
+* `name` (Required, String) - Specifies the name of the VPC peering connection. The value can contain 1 to 64 characters.
+
+* `vpc_id` (Required, String, ForceNew) - Specifies the ID of a VPC involved in a VPC peering connection.
+  Changing this creates a new VPC peering connection.
+
+* `peer_vpc_id` (Required, String, ForceNew) - Specifies the VPC ID of the accepter tenant.
   Changing this creates a new VPC peering connection.
 
-* `peer_vpc_id` (Required) - Specifies the VPC ID of the accepter tenant. Changing this creates a new VPC peering connection.
+* `peer_tenant_id` (Optional, String, ForceNew) - Specified the Tenant Id of the accepter tenant.
+  Changing this creates a new VPC peering connection.
 
-* `peer_tenant_id` (Optional) - Specified the Tenant Id of the accepter tenant. Changing this creates a new VPC peering connection.
-
 ## Attributes Reference
 
 All of the argument attributes are also exported as
@@ -53,6 +58,13 @@ result attributes:
 
 * `status` - The VPC peering connection status. The value can be PENDING_ACCEPTANCE, REJECTED, EXPIRED, DELETED, or ACTIVE.
 
+## Timeouts
+
+This resource provides the following timeouts configuration options:
+
+* `create` - Default is 10 minute.
+* `delete` - Default is 10 minute.
+
 ## Import
 
 VPC Peering resources can be imported using the `vpc peering id`, e.g.