Major changes.

indent.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+indent -linux -l150 youyue858d.ino
+indent -linux -l150 youyue858d.h
+

youyue858d.h

@@ -0,0 +1,62 @@
+#ifndef youyoue858d_h
+#define youyoue858d_h
+
+typedef struct CPARAM {
+	int16_t limit_low;
+	int16_t limit_high;
+	int16_t value;
+	uint8_t eep_addr_high;
+	uint8_t eep_addr_low;
+} CPARAM;
+
+#define FAN_OFF ( PORTC |= _BV(PC3) )
+#define FAN_ON  ( PORTC &= ~_BV(PC3) )
+#define FAN_IS_ON ( !(PINC & _BV(PC3)) )
+#define FAN_IS_OFF ( PINC & _BV(PC3) )
+
+#define DIG0_OFF ( PORTB &= ~_BV(PB0) )
+#define DIG1_OFF ( PORTB &= ~_BV(PB7) )
+#define DIG2_OFF ( PORTB &= ~_BV(PB6) )
+
+#define DIG0_ON ( PORTB |= _BV(PB0) )
+#define DIG1_ON ( PORTB |= _BV(PB7) )
+#define DIG2_ON ( PORTB |= _BV(PB6) )
+
+#define SEGS_OFF ( PORTD = 0xFF )
+
+// THIS IS WHERE IT GETS DANGEROUS
+// YOU CAN START A FIRE AND DO A LOT OF HARM WITH
+// THE HEATER / TRIAC COMMANDS
+#define TRIAC_ON ( PORTB &= ~_BV(PB1) )
+#define HEATER_ON TRIAC_OFF
+#define TRIAC_OFF ( PORTB |= _BV(PB1) )
+#define HEATER_OFF TRIAC_OFF
+
+#define SW0_PRESSED ( !(PINB & _BV(PB5)) )
+#define SW1_PRESSED ( !(PINB & _BV(PB2)) )
+
+#define REEDSW_CLOSED ( !(PINB & _BV(PB4)) )
+#define REEDSW_OPEN ( PINB & _BV(PB4) )
+
+#define SHOW_SETPOINT_TIMEOUT 2000L
+
+#define HEATER_DUTY_CYCLE_MAX 512L
+#define PWM_CYCLES 512L
+
+#define P_GAIN_DEFAULT 0
+#define I_GAIN_DEFAULT 0
+#define D_GAIN_DEFAULT 0
+#define TEMP_OFFSET_CORR_DEFAULT 33
+
+#define TEMPERATURE_AVERAGES 1000L
+#define TEMPERATURE_MAX_OVERSHOOT 8
+#define TEMPERATURE_REACHED_MARGIN 4
+#define MIN_TEMPERATURE_SP 65
+#define MAX_TEMPERATURE_SP 500L
+#define MAX_TEMPERATURE_ERR 600L
+
+#define SAFE_TO_TOUCH_TEMPERATURE 40
+#define FAN_OFF_TEMPERATURE 45
+#define FAN_ON_TEMPERATURE 60
+
+#endif