Skip to content

exporter to get metrics from redfish based hardware such as lenovo/dell/superc servers

License

Notifications You must be signed in to change notification settings

GregWhiteyBialas/redfish_exporter

 
 

Repository files navigation

redfish_exporter

A prometheus exporter to get metrics from redfish based servers such as lenovo/dell/Supermicro servers.

Configuration

An example configure given as an example:

hosts:
  10.36.48.24:
    username: admin
    password: pass
  default:
    username: admin
    password: pass
groups:
  group1:
    username: group1_user
    password: group1_pass

Note that the default entry is useful as it avoids an error condition that is discussed in this issue.

Building

To build the redfish_exporter executable run the command:

make build

or build in centos 7 docker image

make docker-build-centos7

or build in centos 8 docker image

make docker-build-centos8

or we can also build a docker image using Dockerfile

Running

  • running directly on linux

    redfish_exporter --config.file=redfish_exporter.yml

    and run redfish_exporter -h for more options.

  • running in container

    Also if you build it as a docker image, you can also run in container, just remember to replace your config /etc/prometheus/redfish_exporter.yml in container

Scraping

We can get the metrics via

curl http://<redfish_exporter host>:9610/redfish?target=10.36.48.24

or by pointing your favourite browser at this URL.

Reloading Configuration

PUT /-/reload
POST /-/reload

The /-/reload endpoint triggers a reload of the redfish_exporter configuration. 500 will be returned when the reload fails.

Alternatively, a configuration reload can be triggered by sending SIGHUP to the redfish_exporter process as well.

Prometheus Configuration

You can then setup Prometheus to scrape the target using something like this in your Prometheus configuration files:

  - job_name: 'redfish-exporter'

    # metrics_path defaults to '/metrics'
    metrics_path: /redfish

    # scheme defaults to 'http'.

    static_configs:
    - targets:
       - 10.36.48.24 ## here is the list of the redfish targets which will be monitored
    relabel_configs:
      - source_labels: [__address__]
        target_label: __param_target
      - source_labels: [__param_target]
        target_label: instance
      - target_label: __address__
        replacement: localhost:9610  ### the address of the redfish-exporter address, hence relpace localhost with the server IP address that redfish-export is running on
      # (optional) when using group config add this to have group=my_group_name
      - target_label: __param_group
        replacement: my_group_name

Note that port 9610 has been reserved for the redfish_exporter.

Supported Devices (tested)

  • Enginetech EG520R-G20 (Supermicro Firmware Revision 1.76.39)
  • Enginetech EG920A-G20 (Huawei iBMC 6.22)
  • Lenovo ThinkSystem SR850 (BMC 2.1/2.42)
  • Lenovo ThinkSystem SR650 (BMC 2.50)
  • Dell PowerEdge R440, R640, R650, R6515, C6420
  • GIGABYTE G292-Z20, G292-Z40, G482-Z54

Acknowledgement

  • gofish provides the underlying library to interact servers

About

exporter to get metrics from redfish based hardware such as lenovo/dell/superc servers

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Go 93.4%
  • Makefile 2.9%
  • Smarty 2.1%
  • Other 1.6%