ICRS Printer Release Button

This project involves the development of a release button for an ICRS printer using an ESP32C3 development board and Arduino framework. This README provides an overview of the project structure, its components, and wiring details.

Project Structure

The project is organized as follows:

Arduino

• .vscode/: Configuration files for Visual Studio Code.
• include/: Header files for the project.
• lib/: Libraries used by the project.
• src/: Source code for the project.
• test/: Test files for the project.
• .gitignore: Specifies files and directories to be ignored by git.
• platformio.ini: PlatformIO configuration file.

Model

• ESP32Board/: Contains files related to the ESP32 board model.
• Exports/: Exported files for the project.
• LED/: LED-related files and models.
• Renders/: Rendered images or files for the project.
• Switch/: Files related to the switch mechanism.
• Base.SLDPRT: SolidWorks part file for the base of the assembly.
• ButtonAssembly.SLDASM: SolidWorks assembly file for the button.
• Cover.SLDPRT: SolidWorks part file for the cover.

Wiring

The wiring for the ESP32C3 development board is as follows:

• Green LED wire to D1
• Red LED wire to D2
• Push switch on D4 and D5
• LED ground to GND

Getting Started

To get started with this project, follow these steps:

1. Clone the repository:

   git clone https://github.com/ICRS/icrs_printer_release_button.git

2. Open the project in Visual Studio Code.
3. Build and upload the firmware using PlatformIO.

Dependencies

Ensure you have the following installed:

• PlatformIO
• Visual Studio Code
• Arduino framework

License

This project is licensed under the MIT License. See the LICENSE file for more details.

Contributing

Contributions are welcome! Please open an issue or submit a pull request.