Tsuna_Slime

Case Designs + PCB to get you easily set up using BNO085 for SlimeVR.
All files provided are licensed under CC BY-NC 4.0. Do not use for commercial purposes.

SlimeVR GIT https://github.com/SlimeVR

SlimeVR Docs https://docs.slimevr.dev

Supports GY-BNO08X as the main tracker and either GY or Adafruit BNO08X as the aux. Fitted for JST-XH connectors. Remember that no 3D printer prints 1:1 so some files may print differently depending on your printer. I would suggest ordering the PCB, printing the main case and making sure the PCB fits. Then print the lid and make any adjustments necessary.

File contains -
STL Files
Gerber Files
Fusion Files (if you want to edit)
EasyEDA Files (if you want to edit)
Example Images
Example Schematics

Enjoy 🐟

Update 11 July 2023 -
Created a PCB variant to allow serial access.
The board is currently physically untested.
The Case Lid does not currently fit this board but will be added soon with the help of DIYers.

Update 12 July 2023 -
Improved ground planes to serial version.
Improved silk layer labeling for both OTA and Serial version.
Changed the position of two through holes for the Charge Board so they fit better for both OTA and Serial version.