Decoupling

.gitignore

@@ -1,2 +1,5 @@
 .venv/
+venv/
 __pycache__/
+.idea/
+.ropeproject

Templates/Spec.txt

@@ -0,0 +1 @@
+Cílem této větve je vytvořit pinout_diagram.py který nebude muset být editová pro každý jenotlivý devkit.

Templates/data.py

@@ -0,0 +1,229 @@
+#Names
+from sndhdr import whathdr
+
+brdName = "" #add board name here
+brdImgName = "" #location of board .png
+
+
+D_WIDTH = 3180 #resulting diagram width
+D_HEIGHT = 1860 #resulting diagram height
+
+
+#certain labels don't generate properly, as the image gets moved by pinout_diagram.py. This calculates that same shift and allows it to be applied to pin labels
+from pinout.core import Group, Image
+image = Image(brdImgName, embed=True)
+wid_shift = ((D_WIDTH-image.width) // 2) +200 #image.x
+hgt_shift = 32 * 4 #image.y
+
+# Text
+title = "<tspan class='title strong'>LaskaKit ESP32-LPKit</tspan> <tspan class='title'>Pinout</tspan>"
+
+# Define legends here. eg.:
+#
+# legend = [
+#     ("Analog   ", "analog"),
+#     ("Other    ", "other"),
+#     ("Ground   ", "gnd"),
+#     ("GPIO     ", "gpio"),
+#     ("Power    ", "pwr"),
+#     ("RTC      ", "rtc"),
+#     ("I2C      ", "i2c"),
+#     ("SPI      ", "spi"),
+#     ("UART     ", "uart"),
+# ]
+#
+# legendSPI = [
+#     ("CS - 46  ", "rtc"),
+#     ("MOSI - 3 ", "mosi"),
+#     ("SCK - 14 ", "scl"),
+#     ("MISO - 21", "sda"),
+#     ("3.3V - 47", "pwr"),
+#     ("GND", "gnd")
+# ]
+#
+# legendI2C = [
+#     ("GND", "gnd"),
+#     ("3.3V - 47", "pwr"),
+#     ("SDA - 42", "sda"),
+#     ("SCL - 2 ", "scl")
+# ]
+
+legendList = [] #Array of all legends, eg. [legendI2C, legendSPI, legend]
+legendCoords = [] #Array of coordinates of each legend, ef [(-390, 1080), (870, 520), (32-wid_shift, 32*8-hgt_shift)]
+
+
+# Pinlabels. Each pin is an array of touples, with each touple being in the format of (TEXT, appearance)
+
+left_header = [
+#     [
+#         ("3V3", "pwr"),
+#     ],
+#     [
+#         ("EN", "pwr"),
+#     ],
+#     [
+#         ("GP4", "gpio"),
+#         ("ADC1 CH3", "analog"),
+#         ("TOUCH 4", "other"),
+#         ("RTC_IO4", "rtc")
+#     ],
+#     [
+#         ("GP5", "gpio"),
+#         ("ADC1 CH4", "analog"),
+#         ("TOUCH 5", "other"),
+#         ("RTC_IO5", "rtc")
+#     ],
+#     [
+#         ("GP6", "gpio"),
+#         ("ADC1 CH5", "analog"),
+#         ("TOUCH 6", "other"),
+#         ("RTC_IO6", "rtc")
+#     ],
+#     [
+#         ("GP7", "gpio"),
+#         ("ADC1 CH6", "analog"),
+#         ("TOUCH 7", "other"),
+#         ("RTC_IO7", "rtc")
+#     ],
+#     [
+#         ("GP15", "gpio"),
+#         ("ADC2 CH4", "analog"),
+#         ("TOUCH 12", "other"),
+#         ("RTS_0", "spi"),
+#         ("RTC_IO15", "rtc"),
+#         ("RXD 1", "uart")
+#     ],
+#     [
+#         ("GP16", "gpio"),
+#         ("ADC2 CH5", "analog"),
+#         ("CTS_0", "spi"),
+#         ("RTC_IO16", "rtc"),
+#         ("TXD 1", "uart")
+#     ],
+#     [
+#         ("GP17", "gpio"),
+#         ("ADC2 CH6", "analog"),
+#         ("TXD 1", "spi"),
+#         ("RTC_IO17", "rtc")
+#     ],
+#     [
+#         ("GP18", "gpio"),
+#         ("ADC2 CH7", "analog"),
+#         ("RXD 1", "spi"),
+#         ("RTC_IO18", "rtc"),
+#         ("CLK_OUT3", "other")
+#     ],
+#     [
+#         ("GP8", "gpio"),
+#         ("ADC1 CH7", "analog"),
+#         ("TOUCH 8", "other"),
+#         ("RTC_IO8", "rtc"),
+#         ("SDA", "i2c")
+#     ],
+#     [
+#         ("GP19", "gpio"),
+#         ("ADC2 CH8", "analog"),
+#         ("RXD 2", "uart"),
+#         ("RTS 1", "spi"),
+#         ("RTC_IO19", "rtc"),
+#         ("CLK_OUT2", "other"),
+#         ("USB D+", "other")
+#     ],
+#     [
+#         ("GP20", "gpio"),
+#         ("ADC2 CH9", "analog"),
+#         ("TXD 2", "uart"),
+#         ("RTS 1", "spi"),
+#         ("RTC_IO19", "rtc"),
+#         ("CLK_OUT2", "other"),
+#         ("USB D-", "other")
+#     ],
+#     [
+#         ("GP3", "gpio"),
+#         ("ADC1 CH2", "analog"),
+#         ("TOUCH 3", "other"),
+#         ("RTC_IO3", "rtc"),
+#         ("JTAG", "other")
+#     ],
+#     [
+#         ("GND", "gnd"),
+#     ],
+#     [
+#         ("VCC", "pwr"),
+#     ]
+]
+
+right_header = [
+#     [
+#         ("GND", "gnd"),
+#     ],
+#     [
+#         ("GP1", "gpio"),
+#         ("ADC1 CH0", "analog"),
+#         ("TOUCH 1", "other"),
+#         ("RTC_IO1", "rtc"),
+#     ],
+#     [
+#         ("GP43", "gpio"),
+#         ("CLK OUT1", "other"),
+#         ("TXD 0","uart")
+#     ],
+#     [
+#         ("GP44", "gpio"),
+#         ("CLK OUT2", "other"),
+#         ("RXD 0", "uart")
+#     ],
+#     [
+#         ("GP41", "gpio"),
+#         ("MTDI", "other")
+#     ],
+#     [
+#         ("GP40", "gpio"),
+#         ("CLK OUT2", "other"),
+#         ("MTDO", "other"),
+#         ("Pushbutton", "other")
+#     ],
+#     [
+#         ("GP39", "gpio"),
+#         ("CLK OUT3", "other"),
+#         ("MTDCK", "other")
+#     ],
+#     [
+#         ("If PSRAM = OFF", "pwr"),
+#         ("GP35", "gpio"),
+#         ("FSPIPW", "other")
+#     ],
+]
+
+def linear_search(data, target):
+    for tup in data:
+        if target in tup:
+            return tup
+    return None
+
+
+#Hardware coordinates, add your hardware in the format ("name", x, y), eg ("3v3", 50, 145), ("3v3", 10, 81), ("gnd", 560, 145), ("pin_pitch_v", 0, 51), ("pin_pitch_h", 50, 0), ("usb_power", 320, 1435), ("usup", 80, 1140), ("bat", 530, 790), ("disp", 570, 1150), ("SPI", 530, 640)
+hwCoordiantes =[]
+
+#definitions of pin labels, eg: ("USB-POWER", linear_search(hwCoordiantes, "usb_power")[1], linear_search(hwCoordiantes, "usb_power")[2], "pwr", (1, 1), {"x": 0, "y": 200, "width": 200, "height": 40}, {"direction": "vh"}),
+                    #("μŠup i2c", linear_search(hwCoordiantes, "usup")[1], linear_search(hwCoordiantes, "usup")[2], "i2c", (-1,1), {"x": 100, "y": 0, "width": 200, "height": 40}, None),
+                    #("Battery Connector", linear_search(hwCoordiantes, "bat")[1], linear_search(hwCoordiantes, "bat")[2], "pwr", (1, 1), {"x": 100, "y": 0, "width": 250, "height": 40}, None),
+                    #("Display Connector", linear_search(hwCoordiantes, "disp")[1], linear_search(hwCoordiantes, "disp")[2], "other", (1, 1), {"x": 100, "y": 0, "width": 300, "height": 40}, None),
+                    #("μŠup SPI", linear_search(hwCoordiantes, "SPI")[1], linear_search(hwCoordiantes, "SPI")[2], "spi", (1, 1), {"x": 100, "y": 0, "width": 210, "height": 40}, None)
+#content, x, y, tag, scale, body, leaderline
+graphicPinLabels = [
+
+    ]
+
+#definiton of pin label groups, eg.: (linear_search(hwCoordiantes, "gnd")[1], linear_search(hwCoordiantes, "gnd")[2], linear_search(hwCoordiantes, "pin_pitch_v"), (50, 0), (0, 50), (1, 1), right_header, {"height": 38, "width": 200}),
+                                    #(linear_search(hwCoordiantes, "3v3")[1], linear_search(hwCoordiantes, "3v3")[2], linear_search(hwCoordiantes, "pin_pitch_v"),(50, 0), (0, 50), (-1, 1), left_header, {"height": 38, "width": 200})
+
+graphicPinLabelGroups = [
+
+]
+
+# description = """Python tool kit to assist with
+# documentation of electronic hardware.
+# More info at <tspan class='italic strong'>pinout.readthedocs.io</tspan>"""
+
+