Skip to content

Releases: MKFirmware/MarlinKimbra

MarlinKimbra v4.1.4

19 Aug 17:26
@MagoKimbra MagoKimbra
v4.1.4
f7820b1
Compare
Choose a tag to compare
MarlinKimbra v4.1.4 Latest
Latest

Version 4.1.4

  • Add support for Piggy Alligator board
  • Add Debug_info. Repetier button info for enabled or disabled, or M111 S2 for enabled and M111 S0 for disabled.
  • Improved Topography Auto Bed Level.
  • Add Dryrun ABL and verbose width command G29 D or G29 V(0-4).
  • Improve Autoconfiguration for Delta printer.
  • Add support (test only) for NEXTION HMI LCD.
  • Improved firmare test dialog.
  • Bugfix for SDCONFIG routine. Now the configuration file will be readed and created only on the root of the SD.
  • Improved "Thermal Runaway Protection" now the system will be halted also if the thermistor is missing before the temperature is reached as suggested in Issue #35.
  • Improved "Extruder Idle Oozing Prevention" by adding a more efficient way to detect planned movements. Now this feature seems stable and can be used by anyone.
  • Bugfix for sdinit.
  • Removed tab character from the code.
  • Removed some unuseful spacing from the code.

Version 4.1.3

  • Improved support for Delta, SCARA, COREXY & COREXZ kinematics.
  • Improved stepper timer for high velocity driver and not.
  • Add calibrate surface width DELTA.
  • Improved serial comunication width most popular Host.
  • Add Acceleration retraction for extruder.
  • Add EJerk for extruder.
  • Remove limit for virtual extruder to 4. Now width MKR4 or NPr2 is possible have infinite extruder...
  • Add M92 T* E (Set step per unit for any extruder).
  • Add M203 T* E (Set max feedrate for any extruder).
  • Add M204 T* R (Set acc retraction for any extruder).
  • Add M205 T* E (Set E Jerk for any extruder).
  • Add Slot for G60 & G61.
  • G60 Save current position coordinates (all axes, for active extruder). S - specifies memory slot # (0-based) to save into (default 0).
  • G61 Apply/restore saved coordinates to the active extruder. X Y Z E - Value to add at stored coordinates. F - Set Feedrate. S - specifies memory slot # (0-based) to save into (default 0).
Assets 2
Loading

MarlinKimbra 4.1.2

18 Aug 21:49
@MagoKimbra MagoKimbra
v4.1.2
4460dea
Compare
Choose a tag to compare
MarlinKimbra 4.1.2

Version 4.1.2

  • Serial message function standardized for a better code style
  • Auto-Create configuration file if not exist
  • FIX for sdcard crash problem during configuration file reading
  • FIX for some undefined SCARA defines

Version 4.1.1

  • Add Power (Watt) Sensor
  • Add Anti OOZING
  • Add Power Consumation and Power On Time
  • Configurations stored in the SD are updated in real-time (every SD_CFG_SECONDS seconds) also if you remove-insert the sd or you start your printer without the SD card.
  • Reduced code size, maybe a lot depending on your configuration.
  • Improved support for Delta, SCARA, and COREXY kinematics.
  • Move parts of Configuration files to Conditionals.h and SanityCheck.h.
  • Clean up of temperature code.
  • Enhanced G29 with improved grid bed leveling based on Roxy code. See documentation.
  • EEPROM layout updated to V21.
  • Added M204 travel acceleration options.
  • M204 "P" parameter replaces "S." "S" retained for backward compatibility.
  • M404 "N" parameter replaced with "W." ("N" is for line numbers only).
  • Much cleanup of the code.
  • Improved support for Cyrillic and accented languages.
  • LCD controller knob acceleration.
  • Improved compatibility with various sensors, MAX6675 thermocouple.
  • Filament runout sensor support.
  • Filament width measurement support.
  • Support for TMC and L6470 stepper drivers.
  • Better support of G-Code ; comments, \, N line numbers, and * checksums.
  • Moved GCode handling code into individual functions per-code.

Version 4.1.0

  • Initial release
Assets 2
Loading