Skip to content

Registration/Control utility for applications launched through a runtime-engine, e.g containers

License

Notifications You must be signed in to change notification settings

OSInside/flake-pilot

Repository files navigation

Flake Pilot

Semi Transparent Container/VM instances

  1. Introduction
    1. Use Cases
  2. Installation
  3. Quick Start OCI containers
  4. Quick Start FireCracker VMs
    1. Use FireCracker VM image from components
    2. Networking
  5. Application Setup
  6. How To Build Your Own App Images

Introduction

flake-pilot is a software to register, provision and launch applications that are actually provided inside of a runtime environment like an OCI container or a FireCracker VM. There are two main components:

  1. The launchers

    The launcher binary. Each application that was registered as a flake is redirected to a launcher binary. As of today support for the podman and firecracker engines are implemented leading to the respective podman-pilot and firecracker-pilot launcher binaries.

  2. The flake registration tool

    flake-ctl is the management utility to list, register, remove, and-more... flake applications on your host.

The main idea for flake-pilot was not only to launch isolated apps like native binaries but also allow to run a provision step prior calling the application. This concept then allows to run semi transparent container/VM instances which can take information from other places prior its execution. The following diagram visualizes this concept:

As a result we see some interesting use cases described in the following section.

Use Cases

  • delta containers used together with a base container such that only small delta containers gets pulled to the registry used with a base that exists only once.

  • include arbitrary data without harming the host integrity e.g custom binaries, proprietary software not following package guidelines and standards, e.g automotive industry processes which we will not be able to change in this live ;)

  • layering of several containers, e.g deltas on top of a base. Building up a solution stack e.g base + python + python-app.

  • provisioning app dependencies from the host instead of providing them in the container, e.g a delta container providing the app using a base container but take the certificates or other sensitive information from the host; three way dependency model.

Actually all of the above use cases are immaterial if a proper packaging, release and maintenance of the application is possible. However, I have learned the world is not an ideal place and there might be a spot for this project to be useful, supporting users with "special" needs and adding an adaptive feature to the OS.

For demo purposes and to showcase the mentioned use cases, some example images were created. See How To Build Your Own App Images for further details

Installation

flake-pilot components are written in rust and available as packages for SUSE ALP as follows:

zypper addrepo https://download.opensuse.org/repositories/home:/marcus.schaefer:/EOS/ALP/
zypper install flake-pilot flake-pilot-podman flake-pilot-firecracker

Manual compilation and installation can be done as follows:

make build && make install

Quick Start OCI containers

As a start let's register an application named aws which is connected to the aws-cli container provided by Amazon on docker.io/amazon.

  1. Pull the container

    flake-ctl podman pull --uri docker.io/amazon/aws-cli
  2. Register the aws application

    flake-ctl podman register --container amazon/aws-cli --app /usr/bin/aws --target /

    This creates /usr/bin/aws on your host which actually launches the amazon/aws-cli container. The default entry point of the container was configured by Amazon to launch their cloud API application. Thus the target program to call inside of the container doesn't need to be explicitly configured in the registration and is therefore just set to /

  3. Launch the application

    To run aws just call for example:

    aws ec2 help

Let's register an editor application next. The following example uses the joe editor flake which was produced as a delta container against the basesystem container.

  1. Register the joe application

    flake-ctl podman register \
        --app /usr/bin/joe \
        --container registry.opensuse.org/home/marcus.schaefer/delta_containers/containers_tw/joe \
        --base registry.opensuse.org/home/marcus.schaefer/delta_containers/containers_tw/basesystem \
        --target /usr/bin/joe
  2. Launch the application

    To run the joe editor just call:

    joe

This example also shows that it's not required to explicitly pull the required containers. At launch time missing containers will be pulled automatically.

Quick Start FireCracker VMs

Using containers to isolate applications from the host system is a common approach. The limitation comes on the level of the kernel. Each container shares the kernel with the host and if applications requires to run privileged, requires direct access to device nodes or kernel interfaces like the device mapper, a deeper level of isolation might be needed. At this point full virtual system instances running its own kernel, optional initrd and processes inside provides a solution. The price to pay is on the performance side but projects like KVM and FireCracker offers a nice concept to run virtual machines accelerated through KVM as competitive alternative to containers. Thus flake-pilot also implements support for the firecracker engine.

Start an application as virtual machine (VM) instance as follows:

  1. Pull a firecracker compatible VM

    flake-ctl firecracker pull --name leap \
        --kis-image https://download.opensuse.org/repositories/home:/marcus.schaefer:/delta_containers/images_leap/firecracker-basesystem.$(uname -m).tar.xz
  2. Register the mybash application

    flake-ctl firecracker register --vm leap \
        --app /usr/bin/mybash --target /bin/bash --overlay-size 20GiB

    This registers an app named mybash to the system. Once called a firecracker VM based on the pulled leap image is started and the /bin/bash program is called inside of the VM instance. In addition some write space of 20GB is added to the instance

  3. Launch the application

    To run mybash just call for example:

    mybash

    Drops you into a bash shell inside of the VM

    NOTE: The data transfer from the virtual machine to the host is done through the serial console. As the process of calling the application includes the boot of the virtual machine, it might happen that kernel messages are intermixed with the output of the application. Our default setting prevents kernel messages from being printed to the console as much as possible but there are message that can hardly be prevented or requires a customized kernel build to be suppressed. If this is unwanted use the

    --force-vsock

    option when registering the application.

    There are still limitations such as that there is also no differentiation between stdout and stderr anymore and the exit code of the VM call is not matching the exit code of the application call.

Use FireCracker VM image from components

In the quickstart for FireCracker a special image type called kis-image was used. This image type is specific to the KIWI appliance builder and it provides the required components to boot up a FireCracker VM in one archive. However, it's also possible to pull a FireCracker VM image from its single components. Mandatory components are the kernel image and the rootfs image, whereas the initrd is optional. The FireCracker project itself provides its images in single components and you can use them as follows:

  1. Pull a firecracker compatible VM

    flake-ctl firecracker pull --name firecore \
        --rootfs https://s3.amazonaws.com/spec.ccfc.min/ci-artifacts/disks/$(uname -m)/ubuntu-18.04.ext4 \
        --kernel https://s3.amazonaws.com/spec.ccfc.min/img/quickstart_guide/$(uname -m)/kernels/vmlinux.bin
  2. Register the fireshell application

    flake-ctl firecracker register \
        --app /usr/bin/fireshell --target /bin/bash --vm firecore --no-net
  3. Launch the application

    To run fireshell just call for example:

    fireshell -c "'ls -l'"

Networking

As of today firecracker supports networking only through TUN/TAP devices. As a consequence it is a user responsibility to setup the routing on the host from the TUN/TAP device to the outside world. There are many possible solutions available and the following describes a simple static IP and NAT based setup.

The proposed example works within the following requirements:

  • initrd_path must be set in the flake configuration
  • The used initrd has to provide support for systemd-(networkd, resolved) and must have been created by dracut such that the passed boot_args in the flake setup will become effective
  1. Enable IP forwarding

    sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
  2. Setup NAT on the outgoing interface

    Network Address Translation(NAT) is an easy way to route traffic to the outside world even when it originates from another network. All traffic looks like if it would come from the outgoing interface though. In this example we assume eth0 to be the outgoing interface:

    sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
    sudo iptables -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
  3. Setup network configuration in the flake setup

    The flake configuration for the registered mybash app from above can be found at:

    vi /usr/share/flakes/mybash.yaml

    The default network setup is based on DHCP because this is the only generic setting that flake-ctl offers at the moment. The setup offered for networking provides the setting ip=dhcp. Change this setting to the following:

    vm:
      runtime:
        firecracker:
          boot_args:
            - ip=172.16.0.2::172.16.0.1:255.255.255.0::eth0:off
            - rd.route=172.16.0.1/24::eth0
            - nameserver=8.8.8.8

    In this example the DHCP based setup changes to a static IP: 172.16.0.2 using 172.16.0.1 as its gateway and Google to perform name resolution. Please note: The name of the network interface in the guest is always eth0. For further information about network setup options refer to man dracut.cmdline and lookup the section about ip=

  4. Create a tap device matching the app registration. In the above example the app /usr/bin/mybash was registered. The firecracker pilot configures the VM instance to pass trafic on the tap device name tap-mybash. If the application is called with an identifier like mybash @id, the tap device name tap-mybash@id is used.

    sudo ip tuntap add tap-mybash mode tap

    NOTE: If the tap device does not exist, firecracker-pilot will create it for you. However, this might be too late in case of e.g a DHCP setup which requires the routing of the tap device to be present before the actual network setup inside of the guest takes place. If firecracker-pilot creates the tap device it will also be removed if the instance shuts down.

  5. Connect the tap device to the outgoing interface

    Select a subnet range for the tap and bring it up

    NOTE: The settings here must match with the flake configuration !

    ip addr add 172.16.0.1/24 dev tap-mybash
    ip link set tap-mybash up

    Forward tap to the outgoing interface

    sudo iptables -A FORWARD -i tap-mybash -o eth0 -j ACCEPT
  6. Start the application

    mybash
    
    $ ip a
    $ ping www.google.de

    NOTE: The tap device cannot be shared across multiple instances. Each instance needs its own tap device. Thus the steps 3,4 and 5 needs to be repeated for each instance.

Application Setup

After the registration of an application they can be listed via

flake-ctl list

Each application provides a configuration below /usr/share/flakes/. The term flake is a short name that we came up with to provide a generic name for an application running inside of an isolated environment. For our above registered aws flake the config file structure looks like the following:

/usr/share/flakes/
├── aws.d
└── aws.yaml

Please consult the manual pages for detailed information about the contents of the flake setup.

https://github.com/OSInside/flake-pilot/tree/main/doc

How To Build Your Own App Images

Building images as container- or VM images can be done in different ways. One option is to use the Open Build Service which is able to build software packages and images and therefore allows to maintain the complete application stack.

For demo purposes and to showcase the mentioned Use Cases some example images were created and could be considered as a simple flake store. Please find them here:

Feel free to browse through the project and have some fun testing. There is a short description for each application how to use them.

NOTE: All images are build using the KIWI appliance builder which is supported by the Open Build Service backend and allows to build all the images in a maintainable way. KIWI uses an image description format to describe the image in a declarative way. Reading the above examples should give you an idea how things fits together. In case of questions regarding KIWI and the image builds please don't hesitate to get in contact with us.

Flake pilot is a project in its early stages and the result of a fun conversation over beer on a conference. Feedback is very much welcome.

Remember to have fun :)

About

Registration/Control utility for applications launched through a runtime-engine, e.g containers

Resources

License

Stars

Watchers

Forks

Packages

No packages published