ParticularDocs

How to Contribute

Before you start, ensure you have created a GitHub account.

There are two approaches to contributing.

Via the GitHub Web UI

For simple changes, the GitHub web UI should suffice.

Find the page you want to edit on ParticularDocs.
Click the Edit Online button. This will automatically fork the project so you can edit the file.
Make the changes you require. Ensure you verify the changes in the Preview tab.
Add a description of the changes.
Click Propose File Changes.

By Forking and Submitting a Pull Request

For more complex changes you should fork and then submit a pull request. This is useful if you are proposing multiple file changes

Fork on GitHub.
Clone the fork locally.
Work on the feature.
Push the code to GitHub.
Send a Pull Request on GitHub.

For more information, see Collaborating on GitHub especially using GitHub pull requests.

Running locally

The repository contains a devcontainer that has all the necessary tools to develop content for the documentation. The content is automatically rendered on http://localhost:55666.

For more information about devcontainers visit the official documentation. Install the pre-requirements mentioned in the getting started guide and open the repository in Code (> code .).

Note

The docstool is currently started in the foreground. While it is possible to run it in the background with & or the parallel execution feature of devcontainer it might be more cumbersome to inspect the log output of the tool. The downside of starting in the foreground is that Code will continuously show a spinner with "Configuring container".

Building samples and snippets

To build all samples and snippets run .\tools\build-samples-and-snippets.ps1 from the repository root folder.

Reviewing a page

If, as part of editing a page, a full review of the content is done, the reviewed header should be updated. This date is used to render the last reviewed page.

As part of a full review the following should be done:

Spelling (US)
Grammar
Version specific language and content is correct
Language is concise
All links are relevant. No 3rd party links have redirects or 404s.
Are there any more links that can be added to improve the content
Content is correct up to and including the current released version
Content can benefit from having its own header so that it is picked up while searching for a related topic.
Summary and title is adequate
Update reviewed date in header, even if no changes were made.

Conventions

Lower case and `-` delimited

All content files (.md, .png, .jpg etc) and directories must be lower case.

All links pointing to them must be lower case.

Use a dash (-) to delimit filenames (e.g. specify-endpoint-name.md).

Headers

Each document has a header. It is enclosed by --- and is defined in a YAML document format.

The GitHub UI will correctly render YAML.

For example:

---
title: Auditing Messages
summary: Provides built-in message auditing for every endpoint.
versions: '[4,)'
related:
- samples/custom-checks/monitoring3rdparty
redirects:
- nservicebus/overview
---

Title

title: Auditing With NServiceBus

Must be 70 characters or less, and 50-60 characters is recommended.

Required. Used for the web page title tag <head><title>, displayed in the page content, and displayed in search results.

Note: When considering what is a good title keep in mind that the parent context of a given page is fairly well known by other means. ie people can see where it exists in the menu and can see where in the hierarchy it is through the breadcrumbs. So it is often not necessary to include the parent title in the current pages title. For example when documenting "Publishers name configuration", for "Azure Service Bus Transport", then "Publishers name configuration" would be a sufficient title where "Publishers name configuration in Azure Service Bus Transport" is overly verbose and partially redundant.

Component

component: Core

Required when using partials views, recommended also when using snippets in multiple versions. Allows the rendering engine determine what versions of the given page should be generated. Specified by providing the component key.

Versions

versions: '[1,2)'

In case of components that consist of multiple packages it's also possible to explicitly specify ranges of versions for each package separately:

versions: 'PackageA:[1,2); PackageB : [3,4); PackageC :*'

Optional. Used for specifying what versions the given page covers, especially relevant for features that are not available in all supported versions. The old format 'nuget_version_range' or 'package_name: nuget_version_range; package_name_2: nuget:version_range2'.

Reviewed

reviewed: 2016-03-01

Optional. Used to capture the last date that a page was fully reviewed. Format is yyyy-MM-dd.

Summary

summary: Provides built-in message auditing for every endpoint.

Optional. Used for the meta description tag (<meta name="description" />) and displaying the search results.

Hidden

hidden: true

Causes two things:

Stops search engines from finding the page using a <meta name="robots" content="noindex" />.
Prevents the page from being found in the docs search.

Preview Image

previewImage: preview-image.png

Populates a feature image for the Open Graph and Twitter Card meta tags for social sharing.

The URL should be a relative URL, usually just the filename in the same directory as the article, but ../ to go up a directory is also supported. If it works in a Markdown image tag ![](relative-url.png) then it should work for the metadata.

Suppress Related

suppressRelated: true

No related content will be displayed at the bottom of the article, including specifically included articles in the metadata, as well as any documents discovered by traversing the directory structure. This is intended for pages where tight control over the presentation of related material is desired.

Redirects

redirects:
- nservicebus/overview

When renaming an existing article to a new name, add the redirects: section in the article header and specify the previous name for the article. If the old URL is linked anywhere, the new renamed article will automatically be served when the user clicks on it.

Values specified in the redirects section must be lower case.
Multiple values can be specified for the redirects, same as tags.
Values are fully qualified

URL format for Redirects and Related

Should be the URL relative to the root with no beginning or trailing slash padding and no .md.

UpgradeGuides

To Mark something as an upgrade guide use isUpgradeGuide: true

The upgradeGuideCoreVersions setting can optionally be used to filter which NSB core version tab the page show up in the search results

isUpgradeGuide: true
upgradeGuideCoreVersions:
 - 5
 - 6

Learning Path

To mark a page as belonging to the Particular Software Learning Path use isLearningPath: true.

Calls to action

callsToAction: ['architecture-review', 'solution-architect']

Calls to action are defined in calls-to-action.yaml.

An example header for an article

In the following example, whenever the URLs /servicecontrol/sc-si or /servicecontrol/debugging-servicecontrol are being requested, the given article will be rendered.

---
title: ServiceInsight Interaction
summary: 'Using ServiceInsight Together'
redirects:
- servicecontrol/sc-si
- servicecontrol/debugging-servicecontrol
related:
- servicecontrol/installation
---

Components

Two things are generally referred to as "components", which can be confusing:

Components, as defined in components.yaml, is the true definition of components, and defines the topic for a page, as well as the collection of snippets that it will pull in. In the case of a component like MSMQ, the functionality started in Core but was moved out to the MSMQ transport, but all of these together use the component MsmqTransport.
NuGet Aliases are frequently misidentified as components because they look the same. NuGet aliases are used to translate the name of a versioned directory like MsmqTransport_1 into the NuGet package NServiceBus.Transport.Msmq. Multiple NuGet aliases can exist within a component, i.e. MSMQ will have versioned snippet directories Core_6 and MsmqTransport_1, which are different NuGet Aliases, but both belong to the same component.

When you are adding a new package, you therefore need to add new entries to both components.yaml and nugetAlias.txt, which can be a source of confusion.

components.yaml

"Components" is a general term used to describe a deployable set of functionality. Components exist in components/components.yaml. Note that over time a component may have moved between nugets or split into new nugets. For example, the ASB Data Bus or the Callbacks.

Sample Component:

- Key: Callbacks
  Url: nservicebus/messaging/callbacks
  NugetOrder:
    - NServiceBus.Callbacks
    - NServiceBus

When adding a new component

Component Key

The component key allows for shorthand when referring to components in page headers.

Component URL

The component URL is the definitive source of documentation for a given component. This will eventually be used to link back to said documentation from both NuGet usages, samples and articles.

Component NugetOrder

Since components can be split over multiple different nugets, it is not possible to infer the order from the NuGet version alone. So we need to have a lookup index and the NugetOrder allows us to sensibly sort component versions. For example, NServiceBus.Callbacks.1.0.0 should sort higher than the version of Callbacks that exists in NServiceBus.5.0.0.

nugetAlias.txt

All NServiceBus-related NuGet packages (used in documentation) are listed in components/nugetAlias.txt. The alias part of the NuGet is the key that is used to infer the version and component for all snippets. For example, Snippets/Callbacks has, over its lifetime, existed in both the Core NuGet and the Callbacks NuGet. So the directories under Callbacks are indicative of the NuGet (alias) they exist in and then split over the multiple versions of a given NuGet.

Example aliases:

ASP: NServiceBus.Persistence.AzureStorage
Autofac: NServiceBus.Autofac
Azure: NServiceBus.Azure
Callbacks: NServiceBus.Callbacks

Target Frameworks

Samples can be targeted to multiple target frameworks. Samples can be edited and tested for multiple frameworks within this repository when using Visual Studio. When the site is rendered, separate downloads for each target framework are generated by splitting the framework list and transforming the project files before zipping.

When multi-targeting samples for NServiceBus 8 and earlier, The recommended set of frameworks is:

<TargetFrameworks>net8.0;net6.0;net48</TargetFrameworks>

For NServiceBus 9, samples can't currently be multi-targeted, so they should be singled targeted:

<TargetFramework>net8.0</TargetFramework>

Some things to keep in mind:

The same list of target frameworks must be used for each project, in the same order.
Target framework monikers (i.e. net8.0) are translated to framework display names (i.e. .NET 8) in /components/tfm-mappings.txt.
- Download dropdown items are ordered by position in this file descending, so that options for newer frameworks are presented first.

- Name: NServiceBus
  Topics:
  - Url: platform
    Title: Getting Started
    Articles:
    - Url: platform
      Title: Particular Service Platform Overview
    - Title: NServiceBus Overview
      Articles:
      - Url: nservicebus/architecture/principles
        Title: Architectural Principles
      - Url: nservicebus/architecture
        Title: Bus versus broker architecture

Conventions:

Top level items the Name is used for the URL.
Title is required for all nodes other than top level.
Maximum of 4 levels deep.
URL is optional. if it does not exist it will render as an expandable node.

URLs

The directory structure where a .md exists is used to derive the URL for that document.

So a file existing at nservicebus\logging\nlog.md will have a URL of https://docs.particular.net/nservicebus/logging/nlog.

Index Pages

One exception to the URL rule is when a page is named index.md. In this case the index.md is omitted in the URL and only the directory structure is used.

So a file existing at nservicebus\logging\index.md will have a URL of https://docs.particular.net/nservicebus/logging/.

Related Pages on Index Pages

Like any page an index page can include related pages. However index pages will, by default, have all sibling and child pages included in the list of related pages. This is effectively a recursive walk of the file system for the directory the given index.md exists in.

Linking

Links to other documentation pages should be relative and contain the .md extension.

The .md allows links to work inside the GitHub web UI. The .md will be trimmed when they are finally rendered.

Given the case of editing a page located at \nservicebus\page1.md:

To link to the file nservicebus\page2.md, use [Page 2 Text](Page2.md).
To link to the file \servicecontrol\page3.md, use [Page 3 Text](/servicecontrol/page3.md).

Don't link to index.md pages, instead link to the directory. So link to /nservicebus/logging and NOT /nservicebus/logging/index.md

Markdown

The site is rendered using GitHub Flavored Markdown

MarkdownPad

For editing markdown on the desktop (after cloning locally with Git) try MarkdownPad.

Markdown flavor

Ensure you enable GitHub Flavored Markdown (Offline) by going to

Tools > Options > Markdown > Markdown Processor > GitHub Flavored Markdown (Offline)

Or click in the bottom left on the M icon to "hot-switch"

YAML

Don't render YAML front-matter by going to

Tools > Options > Markdown > Markdown Settings

And checking Ignore YAML Front-matter

EIP references

Enterprise Integration Patterns (EIP) is a bible of messaging. We sometimes use the same or similar patterns, but name them differently. When describing such a pattern, it's useful to reference the related EIP pattern, to make it easier to understand.

Terms we use and are aligned with EIP

Message
Message Endpoint
Messaging Bridge - Unfortunately we don't have any implementation other than MSMQ-SQL sample
Command Message
Event Message
Request-Reply - not sure if we are 100% aligned here. We use the term Full Duplex to describe a non-synchronous request reply and only use Request-Reply or Callback for the synchronous variant
Correlation ID
Transactional Client
Competing Consumers
Message Store - we have it in ServiceControl

EIP terms and ideas we don't use but can

Message Bus - we dropped using the bus word when referring to an endpoint (which is correct) but I think we can take advantage of this definition of the bus because it is aligned with our concepts.
Dead Letter Channel - only MSMQ implements it, we don't have it on NServiceBus level
Datatype Channel - is a channel reserved for a single data/message type. This is something we should be selling users as a good practice
Channel Adapter - this seems to be similar to the ADSD idea for integration components that pull data from various services in order to combine them into a message
Messaging Gateway and Messaging Mapper - we could prepare guidance based on them on how to use NSB in the application
Control Bus - I believe we should get this implemented in (close) future
Test Message

Terms we use but have a different meaning or name

Message Channel - we call it a queue but EIP name seeps to be more appropriate since e.g. SQL transport does not use queues
Point-to-Point - we use Unicast instead
Publish-Subscribe - we use Multicast instead. I think these two discrepancies are something we need to live with because we reserve Publish/Subscribe name to a logical pattern.
Invalid Message Channel - we call it error queue
Guaranteed Delivery - we call it store and forward
Return Address - we use reply address but I think we are close enough.
Process Manager - we call it Saga
Message Broker - we use the term broker to describe a centralized transport mechanism where all message channels are on remote machine/cluster. EIP sees broker as a thing that also does routing based on message types (and/or content)
Claim Check - we call it Data bus
Event-Driven Consumer - we call it message pump or IPushMessages
Message Dispatcher - we call it Distributor
Selective Consumer - I believe our closest equivalent is a message handler
Wire Tap - we call it audit queue which confuses the purpose with the implementation. The thing is called wire tap and it is usually used to audit message flows.

Samples

Our main goal is to provide the user with a smooth F5 experience when using the platform, and that includes samples, as it might be the user's first introduction to the platform.

When to write a sample

Any of the following, or combination thereof, could indicate that something should be a sample

When there are multiple non-trivial moving pieces that would be mitigated by being able to download a runnable VS solution.
When illustrating how Particular products/tools interact with 3rd-party products/tools.
It is a sample of a significant feature of the Particular platform. e.g. Databus, encryption, pipeline etc.

Do not write a sample when:

The only difference to an existing sample is a minor API usage.

Recommendations

Samples should illustrate a feature or scenario with as few moving pieces as possible. For example, if the sample is "illustrating IOC with MVC" then "adding SignalR" to that sample will only cause confusion. In general, the fewer NuGet packages required to get the point across the better.
Do not "document things inside a sample". A sample is to show how something is used, not to document it. Instead update the appropriate documentation page and link to it. As a general rule, if you add any content to a sample, where that guidance could possibly be applicable to other samples, then that guidance should probably exist in a documentation page.
Start a sample with paragraph(s) that summarize why the sample would be useful or interesting. Think about more than what the sample does, but also what additional scenarios it can enable. After this summary, put the downloadbutton directive in a paragraph by itself, which will be rendered as a large Download the sample now button.

Conventions

Samples are located here.
They are linked to from the home page and are rendered here.
Any directory in that structure with a sample.md will be considered a "root for a sample" or Sample Root.
A Sample Root may not contain a sample.md in subdirectories.
Each directory under the Sample Root will be rendered on the site as a downloadable zip with the directory name being the filename.
A sample.md can use snippets from within its Sample Root but not snippets defined outside that root.
A sample must obey rules that are verified by Integrity Tests.
Samples targeting .NET Core should be able to run across Windows, macOS, and Linux. To ensure that's the case, you can run the sample using WSL (Windows Subsystem for Linux) in VS Code. VS Code can be configured to use WSL as the default development environment. If a sample cannot be designed to support one or more platforms add a note to the sample.md-file with the platforms that are unsupported and the reasoning.
Samples contain no calls to ConfigureAwait(bool) unless they are explicitly required.
Samples should define the LangVersion property to match the default version of the lowest .NET TFM used in the solution.
Only one sample should be defined for a major version, multiple samples for minor versions within a major should not be used. Users can update to a minor to use a new feature, so it's not worth the maintenance cost to maintain multiple projects.

References

Since users often use our samples to kick start their own projects, we want them to always use the latest versions of their dependencies. This is also important since we internally use our samples for smoke testing.

See the NuGet package reference guidelines for more details on how to achieve this.

Startup projects

When a sample is zipped the VS startup projects are also configured. This is done by using SetStartupProjects. By default startable projects are detected though interrogating the project settings. To override this convention and hard-code the list of startup projects add a file named {SolutionName}.StartupProjects.txt in the same directory as the solution file. It should contain the relative paths to the project files you would like to use for startup projects.

For example if the solution "TheSolution.sln" contains two endpoints and you only want to start Endpoint1 the content of TheSolution.StartupProjects.txt would be:

Endpoint1\Endpoint1.csproj

To apply this convention on your local clone of the docs repo use the set startup projects linkpad script.

Bootstrapping a sample

At the moment the best way to get started on a sample is to copy an existing one. Ideally one that is similar to what you are trying to achieve.

A good sample to start with is the Default Logging Sample, since all it does is enable logging. You can then add the various moving pieces to the copy.

Screenshots

Avoid using screenshots in samples unless it adds significant value over what can be expressed in text. They have the following problems:

More time consuming to update than text
Not search-able
Prone to an inconsistent feel as different people take screenshots at different sizes, different zoom levels and with different color schemes for the app in question
Add significantly to the page load time.

The most common misuse of screenshots is when capturing console output. DO NOT DO THIS. Put the text inside a formatted code section instead.

Guidance content

Some of our documentation provides guidance for customers and prospects to make informed decisions when faced with multiple options.

For example, when a customer decides to host an endpoint in Azure, there are multiple options, each with their pros and cons. Vendor documentation on its own is often not enough in the context of creating and running a distributed system with NServiceBus.

Guidance for these decisions is valuable to our customers and is included in our public documentation.

This is not to be confused with comparisons between various vendors or technologies from various vendors. Such comparisons are contentious and are not part of our public documentation.

Tutorials

Tutorials are similar to samples but optimized for new users to follow in a step-by-step fashion. Tutorials differ from samples in the following ways:

Markdown file must be named tutorial.md
No component specified in the header
Focus on only the most recent version
Rendered without button toolbar and component information at the top
By default, solution download button is rendered at the end
- An inline download button can be created instead using a downloadbutton directive on its own line within the tutorial markdown.
Utilizes two collections of snippets, from the solution and also from an optional Snippets solution, allowing more granular or multi-phase snippets
Allows use of personal voice (you/your/we/etc.) within /tutorials directory to foster collaborative tone with user

Directory structure

An example directory structure for a tutorial might look like this:

{tutorial-name}/
  Snippets/ (optional)
    Snippets.sln
    Core_6
  Solution/
    {SolutionName}.sln
  tutorial.md

Tutorials can be grouped together in a parent directory with a normal article serving as a table of contents.

Multi-lesson tutorials

For tutorials chained together to form multiple lessons, navigation can be created to combine a button linking to the next lesson with the Download Solution link.

- !!tutorial
  nextText: "Next Lesson: Sending a command"
  nextUrl: tutorials/nservicebus-step-by-step/2-sending-a-command

The nextText parameter is optional, and will default to the title of the linked page if omitted.

Markdown partials

Partials are version-specific files that contain markdown. Partials are preferable for situations where quite a bit of content differs, or there there will be multiple variants for multiple different versions. For simpler situations, such as a 1-3 line note or aside only for one range of versions, see inline version conditionals below instead.

They are only rendered in the target page when the version filter matches the convention for a give file.

Partial Convention: filePrefix_key_nugetAlias_version.partial.md

Make sure to use component alias (as defined in components.yaml file) in the partial name. For most components component alias will be identical to NuGet alias, however it's not always the case, e.g. the Callbacks feature has been moved out of core package to the dedicated NServiceBus.Callbacks package, so the there are two NuGet aliases that are related to this feature, but it's still the same component and has a single component alias.

The NuGet alias in samples should match the prefix as defined by the samples solution directories.

Partials are rendered in the target page by using the following syntax

partial: PARTIAL_KEY

So an example directory structure might be as follows

And to include the endpointname partial can be pulled into sample.md by including.

partial: endpointname

Inline version conditionals

Inline version conditionals allow a short section of markdown to only apply to a specific version range. This is perfect for situations like an alert for all versions less than version N, where using a partial file might be too heavy-handed and harder to comprehend.

It's important to remember that neither partials nor inline conditionals can create an item in the versions dropdown—only Snippets can do that.

#if-version [7.7, )

This content only displays for versions 7.7 and up

#end-if

#if-version [, 8)

This content only displays for versions less than 8.0

#end-if

#if-version SqlTransportLegacySystemClient [4, 6)

On pages where the snippets span more than one [NuGet package alias](https://github.com/Particular/docs.particular.net/blob/version-conditionals/components/nugetAlias.txt), version expressions must include the version expression.

#end-if

A full NuGet-style version expression is required. #if-version 6 is not allowed because ultimately it would not be clear if that meant version 6 and above [6, ) or only version 6 [6, 7).

Markdown includes

Markdown includes are pulled into the document prior to passing the content through the markdown conversion.

Defining an include

Add a file anywhere in the docs repository that is suffixed with .include.md. For example, the file might be named theKey.include.md.

Using an include

Add the following to the markdown:

include: theKey

Code Snippets

Defining Snippets

There is a some code located here. Any directory containing an _excludesnippets file will have its snippets ignored.

File extensions scanned for snippets include:

.config
.cs
.cscfg
.csdef
csproj
.html
.sql
.txt
.xml
.xsd
ps1
.ps
.json
.proto
.config
.yml
.yaml
Dockerfile

Snippets are highlighted using highlightjs

Inline Code

language	key
c#	`cs`
xml	`xml`
command line	`shell`
powershell	`ps`
json	`json`
sql	`sql`

Always use fenced code blocks with a language. If no language is defined then highlightjs will guess the language and it regularly gets it wrong.

NOTE: For .razor files, since the #region keyword that is used to identify snippets can only be used inside of a razor code block, the language of the snippet will be changed from razor to cs, due to the current limitations of highlightjs for .razor files.

Using comments

Any code wrapped in a convention-based comment will be picked up. The comment needs to start with startcode which is followed by the key.

// startcode ConfigureWith
var configure = Configure.With();
// endcode

For non-code snippets apply a similar approach as in code, using comments appropriate for a given file type. For plain-text files an extra empty line is required before endcode tag.

Tag	XML-based	PowerShell	SQL script	Plain text	Dockerfile / Compose / YAML
Open	`<!-- startcode name -->`	`# startcode name`	`-- startcode name`	`startcode name`	`# startcode name`
Content
Close	`<!-- endcode -->`	`# endcode`	`-- endcode`	`endcode`	`# endcode`

Using regions

Any code wrapped in a named C# region will be picked up. The name of the region is used as the key.

#region ConfigureWith
var configure = Configure.With();
#endregion

Snippet versioning

Snippets are versioned. These versions are used to render snippets in a tabbed manner.

Versions follow the NuGet versioning convention. If either Minor or Patch is not defined they will be rendered as an x. For example, version 3.3 would be rendered as 3.3.x and version 3 would be rendered as 3.x.

Snippet versions are derived in two ways

Version suffix on snippets

Appending a version to the end of a snippet definition as follows:

#region ConfigureWith 4.5
var configure = Configure.With();
#endregion

Or version range:

#region MySnippetName [1.0,2.0]
// My Snippet Code
#endregion

Convention based on the directory

If a snippet has no version defined then the version will be derived by walking up the directory tree until if finds a directory that is suffixed with _Version or _VersionRange. For example:

Snippets extracted from docs.particular.net\Snippets\Snippets_4\TheClass.cs would have a default version of (≥ 4.0.0 && < 5.0.0).
Snippets extracted from docs.particular.net\Snippets\Snippets_4\Special_4.3\TheClass.cs would have a default version of (≥ 4.3.0 && < 5.0.0).
Snippets extracted from docs.particular.net\Snippets\Special_(1.0,2.0)\TheClass.cs would have a default version of (> 1.0.0 && < 2.0.0).

Pre-release marker file

If a file named prerelease.txt exists in a versioned directory then a -pre will be added to the version.

For example, if there is a directory docs.particular.net\Snippets\{Component}\Snippets_6\ and it contains a prerelease.txt file then the version will be (≥ 6.0.0-pre)

Using Snippets

The keyed snippets can then be used in any documentation .md file by adding the text

snippet: KEY

Then snippets with the key (all versions) will be rendered in a tabbed manner. If there is only a single version then it will be rendered as a simple code block with no tabs.

For example:

    To configure the bus call
    snippet: ConfigureWith

The resulting markdown will be:

    To configure the bus call
    ```
    var configure = Configure.With();
    ```

Code indentation

The code snippets will do smart trimming of snippet indentation.

For example, given this snippet:

••#region DataBus
••var configure = Configure.With()
••••.FileShareDataBus(databusPath);
••#endregion

The two leading spaces (••) will be trimmed and the result will be

var configure = Configure.With()
••.FileShareDataBus(databusPath)

The same behavior will apply to leading tabs.

Do not mix tabs and spaces

If tabs and spaces are mixed there is no way for the snippets to work out what to trim.

So given this snippet:

••#region DataBus
••var configure = Configure.With()
➙➙.FileShareDataBus(databusPath);
•#endregion

where ➙ is a tab, the resulting markdown will be

var configure = Configure.With()
➙➙.FileShareDataBus(databusPath)

Note that none of the tabs have been trimmed.

Explicit variable typing versus 'var'

Use var everywhere.

Snippets are compiled

The code used by snippets and samples is compiled on the build server. The compilation is done against the versions of the packages referenced in the samples and snippets projects. When a snippet doesn't compile, the build will break so make sure snippets are compiling properly. Samples and snippets should not reference unreleased NuGet packages.

NuGet package references

Use current minor

NuGet package references should use the the most greedy wildcard that is safe for that reference. In most cases that is "current minor":

<PackageReference Include="NServiceBus.Serilog" Version="4.*" />

This applies to snippets and samples.

Sometimes current patch

In some cases, usually where a package has significant new API in a minor, it may be necessary to version snippets down to the "current patch".

<PackageReference Include="NServiceBus.Persistence.Sql" Version="2.0.*" />

<PackageReference Include="NServiceBus.Persistence.Sql" Version="2.1.*" />

Note that this should be a temporary state and in the next major default back to "current minor".

<PackageReference Include="NServiceBus.Persistence.Sql" Version="3.*" />

Also this generally only applies to snippets. It is usually not necessary to go to that level of version granularity for samples.

Samples always pull in one extra level

All samples pull in one extra level of package dependency. So, for example, in the Rabbit samples it would be sufficient to have:

<PackageReference Include="NServiceBus.RabbitMQ" Version="4.*" />

The reference to NServiceBus and RabbitMQ.Client would then be inferred. However, since the dependencies in NServiceBus.RabbitMQ are:

NServiceBus (>= 6.0.0 && < 7.0.0)
RabbitMQ.Client (>= 5.0.1 && < 5.1.0)

NuGet will then resolve the lowest within those ranges. This make it more difficult to smoke test new versions of those dependencies using samples. As such, for all dependencies that are important to use the latest, the extra dependencies are explicitly included with wildcards.

<PackageReference Include="NServiceBus.RabbitMQ" Version="4.*" />

<ItemGroup Label="Required to force the latest version of transitive dependencies">
  <PackageReference Include="NServiceBus" Version="6.*" />
  <PackageReference Include="RabbitMQ.Client" Version="5.0.*" />
</ItemGroup>

Unreleased NuGet packages

There are some scenarios where documentation may require unreleased or beta NuGet packages. For example, when creating a PR against documentation for a feature that is not yet released. In this case, it is ok for a PR to reference an unreleased NuGet and have that PR fail to build on the build server. Once the NuGet packages have been released that PR can be merged.

In some cases it may be necessary to have merged documentation for unreleased features. In this case the NuGet packages should be pushed to the Particular feed on feedz.io. The feed is included by default in the repository's nuget.config.

Temporary unstables

When documenting an unstable feature, those unstable packages must be explicitly included using the exact prerelease package version using -.

<PackageReference Include="NServiceBus.RabbitMQ" Version="4.3.1-alpha.XYZ" />

Wildcard patterns, like 4.3.1-*, 8.0.0-any-pre-release-version.* are not allowed for pre-releases since they tend to break the snippet and sample builds.

In snippets this can be safely done at any point in time. Note that when for applied to samples this can have side effects on a user who downloads a sample during that period. As such it is generally only done for samples that are marked with a prerelease.txt marker.

This is a temporary state and once a stable is released it is changed back to the "current minor".

<PackageReference Include="NServiceBus.RabbitMQ" Version="4.*" />

Version ranges

Avoid using version ranges for package references. The integrity tests will enforce this.

Integrity tests

A number of integrity tests validate that samples and snippets conform to conventions that make the documentation easier to maintain. Pull requests that fail these tests can not be merged.

The integrity tests include:

Samples should only use the <TargetFrameworks> (plural) element if they are multi-targeted.
Package references cannot use a wildcard-only version using Version="*" as this can cause a package restore operation to sometimes fail and yield old, incorrect, or mismatched versions.
Package references cannot use a ranged version using ranged version format as this can cause a package restore operation to sometimes fail and yield old, incorrect, or mismatched versions.
Versioned sample/snippet directories (i.e. Core_7) must contain a prerelease.txt file only when the contained projects use a prerelease version of that component's NuGet package. This is verified in two ways:
1. Tests find all prerelease.txt files, parse the component name out of the parent directory name, find the related NuGet packages from component metadata, and then scan all child project files for prerelease package references of those NuGet packages, flagging prerelease.txt files with no associated prerelease package reference.
2. Tests examine all project files, finding a parent versioned directory, parse out the component name, look up the NuGet packages from component metadata, scan the project path for any prerelease package references of those NuGet packages, and then flag any missing a prerelease.txt file.

Alerts

GitHub style alert boxes are supported and rendered as bootstrap alerts.

Headings

The first (and all top level) headers in a .md page should be a h2 (i.e. ##) with sub-headings under it being h3, h4, etc.

Spaces

Add an empty line before a heading and any other text
Add an empty line after a heading
Add an empty line between paragraphs

Anchors

One addition to standard markdown is the auto creation of anchors for headings.

So if you have a heading like this:

## My Heading

it will be converted to this:

<h2>
  <a name="my-heading"/>
  My Heading
</h2>

Which means elsewhere in the page you can link to it with this:

[Goto My Heading](#My-Heading)

Images

Images can be added using the following markdown syntax

![Alt text](/path/to/img.jpg "Optional title")

With the minimal syntax being

![](/path/to/img.jpg)

Image sizing

Image size can be controlled by adding the text width=x to the end of the title

For example

![Alt text](/path/to/img.jpg "Optional title width=x")

With the minimal syntax being

![](/path/to/img.jpg "width=x")

This will result in the image being re-sized with the following parameters

width="x" height="auto"

It will also wrap the image in a clickable lightbox so the full image can be accessed.

Maintaining images

Whenever possible, use Mermaid to create images, so that the source of the image is part of the document in which it appears.

If you create an image using another tool, always keep the source so that the image can be updated later.

Mermaid

The support for Mermaid is provided as an extension to Markdig. Markdig converts the diagram definition from .md to HTML, and then the Mermaid JavaScript library converts the definition to SVG format on the fly.

Diagram images are generated using the using a pseudocode syntax like this:

    ```mermaid
    _mermaid_diagram_definition_
    ```

For example:

    ```mermaid
    graph TB
    A[ExchangeA] --> B[ExchangeB]
    A --> D[ExchangeD]
    B --> C[ExchangeC]
    B --> Q1[Queue1]
    D --> Q2[Queue2]
    ```

The diagrams can be created and verified using the online editor.

Messaging Graph Style

Diagrams that represent messages and events being passed between endpoint should follow some basic style rules.

Endpoints should be represented as nodes with rounded corners. Messages should be represented as nodes. To show an endpoint sending a message to another endpoint use two edges. The first edge goes from the sender to the message being sent. The second edge goes from the message to the receiver. Like this:

    ```mermaid
    graph LR
    a(EndpointA)
    b(EndpointB)
    a-->SomeCommand
    SomeCommand-->b
    ```

Showing an endpoint publishing an event is similar but should use a dotted edge. Events can be delivered to multiple recipients. Use a separate edge for each one. Like this:

    ```mermaid
    graph LR
    a(EndpointA)
    b(EndpointB)
    c(EndpointC)
    a-.->AnEvent
    AnEvent-->b
    AnEvent-->c
    ```

There are two css classes (event and message) that should be applied to message nodes in these diagrams. To apply these, use the class keyword in mermaid:

    ```mermaid
    graph LR

    Endpoint1-->SomeCommand
    Command-->Endpoint2
    Endpoint2-.->AnEvent
    AnEvent-.->Endpoint3
    Endpoint3 -.->AnotherEvent
    AnotherEvent -.->Endpoint1
    AnotherEvent -.->Endpoint4

    class SomeCommand message;
    class AnEvent,AnotherEvent event;
    ```

Miro

Another option is Miro. Miro allows the creation of diagrams on a whiteboard. A board can be saved as a board backup file (.rtb) and can be used to create images. Within Miro, we create draw.io diagrams, as these can be exported as PNG images.

To create an image:

Double-click the draw.io diagram to open the diagram in the draw.io editor
From the "File" menu:
- Click "Export as"
- Click "PNG.."
- Set Zoom to 200% to cater for scaled-up high resolution screens.
- Do NOT select "Transparent Background", as this makes the visibility of elements in the image dependent on the user's theme (e.g. light or dark).
Choose the file location and click "Export"

To allow images to be updated later, they must be committed to this repository along with the board backup file(s) use to create them.

Some Useful Characters

Ticks are done with ✔ ✔
Crosses are done with ✖ ✖

More Information

Markdown Cheatsheet

Writing style

Language Preferences

For consistency, prefer American English.

No personal voice. I.e. no "we", "you", "your", "our" etc.

Version language

Avoid ambiguity.

Range: version X and above and version Y and below and version X to version Y.
Singular: version X and NOT VX.

Don't capitalize "version" unnecessarily.

NServiceBus version 6 and NOT NServiceBus Version 6
NServiceBus version 5 and below and NOT NServiceBus Version 5 and below

Don't assume the latest version of a product is the only one being used

Instead of "Prior to NServiceBus version 6.5, sagas could not...", say "In NServiceBus 6.4.x and below, sagas can not..."

Embedding videos

A YouTube video can be embedded in Markdown using the youtube command at the beginning of a line:

Here's an example that embeds the Rick Roll video:

Paragraph before…

youtube: https://www.youtube.com/watch?v=eBGIQ7ZuuiU

Paragraph after…

The engine will parse the video ID out of the YouTube URL and create a properly styled embed.

Terminology

Bus

The word Bus should be avoided in documentation. Some replacements include:

When referring to the topology, use federated (for which the opposite term is centralized)
When referring to the NServiceBus instance, the general thing that sends or publishes messages, use endpoint instance or endpoint (when it is clear from the context that you are talking about an instance rather than a logical concept)
When referring specifically to the IBus interface use message session or message context (depending if you are talking about just sending a messages from external component or from inside a handler)

The word Bus is allowed when a particular piece of documentation refers specifically to version 5 or below and discusses low level implementation details.

Core

The word core as a synonym for NServiceBus or NServiceBus Core should be avoided in the documentation. Prefer using NServiceBus or NServiceBus package.

Links to 3rd parties

RavenDB

Avoid deep link into the RavenDB documentation since it is a maintenance pain. For example don't link to https://ravendb.net/docs/article-page/3.0/Csharp/client-api//session/transaction-support/dtc-transactions#transaction-storage-recovery. When RavenDB 4 was released, article-page/3.0/Csharp became invalid and required an update. Also the RavenDB documentation does not maintain structure between versions. e.g. https://ravendb.net/docs/article-page/2.0/Csharp/client-api//session/transaction-support/dtc-transactions#transaction-storage-recovery is a 404. So we can't trust that "just change the version" will work. Instead link to the RavenDB docs search: https://ravendb.net/docs/search/latest/csharp?searchTerm=THE-SEARCH-TERM. So for the above example it would be https://ravendb.net/docs/search/latest/csharp?searchTerm=Transaction-storage-recovery.

Utilities

Under tools there are several utilities to help with the management of this repository. All are in the form of LINQPad scripts.

projectStandards.linq

Remove redundant content from sln and csproj files.

setStartup.linq

Sets the correct startup projects for every solution. This is persisted in an .suo file for each solution. Since .suo files are not committed to source control, if a re-clone is done this script will need to be re-run.

Git management/behavior

In general the quality of the git history is not important in this repository. The reason for this is that the standard usages of a clean history (blame, supporting old versions, support branches etc) do not apply to a documentation repository. As such there are several recommendations based on that:

If pushed to GitHub do not re-write history. Even locally it is probably not worth the effort.
Do not force push.
Optionally merge commits immediately prior to merging a PR.

So if following the Git pretty flow chart you should usually end in the "It's safest to let it stay ugly" end point.

Name		Name	Last commit message	Last commit date
Latest commit History 22,778 Commits
.devcontainer		.devcontainer
.github		.github
.vscode		.vscode
Snippets		Snippets
architecture		architecture
components		components
get-started		get-started
home		home
menu		menu
monitoring		monitoring
nservicebus		nservicebus
persistence		persistence
platform		platform
samples		samples
security-advisories		security-advisories
servicecontrol		servicecontrol
serviceinsight		serviceinsight
servicepulse		servicepulse
shape-the-future		shape-the-future
tests		tests
tools		tools
transports		transports
tutorials		tutorials
.editorconfig		.editorconfig
.gitattributes		.gitattributes
.gitignore		.gitignore
.markdownlint.json		.markdownlint.json
.prettierignore		.prettierignore
BannedSymbols.txt		BannedSymbols.txt
Directory.Build.props		Directory.Build.props
README.md		README.md
calls-to-action.yaml		calls-to-action.yaml
home.md		home.md
license.md		license.md
nuget.config		nuget.config
partials.png		partials.png
tabbed_snippets.png		tabbed_snippets.png

License

Particular/docs.particular.net

Folders and files

Latest commit

History

Repository files navigation

ParticularDocs

How to Contribute

Via the GitHub Web UI

By Forking and Submitting a Pull Request

Running locally

Building samples and snippets

Reviewing a page

Conventions

Lower case and - delimited

Headers

Title

Component

Versions

Reviewed

Summary

Hidden

Preview Image

Related

Suppress Related

Redirects

URL format for Redirects and Related

UpgradeGuides

Learning Path

Calls to action

An example header for an article

Components

components.yaml

Component Key

Component URL

Component NugetOrder

nugetAlias.txt

Target Frameworks

Menu

URLs

Index Pages

Related Pages on Index Pages

Linking

Markdown

MarkdownPad

Markdown flavor

YAML

EIP references

Terms we use and are aligned with EIP

EIP terms and ideas we don't use but can

Terms we use but have a different meaning or name

Samples

When to write a sample

Recommendations

Conventions

References

Startup projects

Bootstrapping a sample

Screenshots

Guidance content

Tutorials

Directory structure

Multi-lesson tutorials

Markdown partials

Inline version conditionals

Markdown includes

Defining an include

Using an include

Code Snippets

Defining Snippets

Snippets are highlighted using highlightjs

Inline Code

Using comments

Using regions

Snippet versioning

Version suffix on snippets

Convention based on the directory

Pre-release marker file

Using Snippets

Code indentation

Lower case and `-` delimited