Skip to content

Files required for RHEL OpenStack Platform Cinder integration for Pure Storage FlashArray

License

Notifications You must be signed in to change notification settings

PureStorage-OpenConnect/tripleo-deployment-configs

Repository files navigation

Introduction

This document covers the configuration process required to enable a single Pure Storage array to be used as an iSCSI or Fibre Channel Cinder Block Storage backend in Red Hat OpenStack Platform distributions.

The following items are assumed by this document:

  • Ensure your Red Hat OpenStack Platform Overcloud has been correctly deployed through the Director, with a correctly functioning Block Storage service.
  • Your Pure Storage Array should be available in the cloud management network or routed to the cloud management network with the Pure Storage iSCSI ports correctly configured, if using this protocol.
  • The Pure Storage management IP must have connectivity from the Cinder Volume Service controller.
  • The Pure Storage iSCSI ports (if applicable) must have connectivity from the Cinder Volume Service controller and all compute nodes.
  • You have obtained a privileged API token from the Pure Storage FlashArray that will be used by OpenStack Cinder Volume service.

When RHEL OpenStack Platform is deployed through the Director, all major Overcloud settings must be defined and orchestrated through the Director as well. This will ensure that the settings persist through any Overcloud updates.

This document will not discuss the different deployment configurations possible with the backend. To learn more about these see the OpenStack Best Practises documents provided by Pure Storage.

Configure Pure Storage as a Cinder backend

RHEL OpenStack Platform includes all the drivers and puppet manifests required for the Pure Storage FlashArray, however, there are a number of environment files required to be added to your Undercloud for full integration of the FlashArray into your Overcloud.

The YAML environment files required can be found on the Pure Storage OpenConnect GitHub repository https://github.com/PureStorage-OpenConnect/tripleo-deployment-configs. Select the correct sub-directory for the deployment version you are using.

RHOSP 8 and 9

NOTE: Red Hat OpenStack Platform 8 and 9 are no longer supported by Red Hat or Pure Storage.

Obtain the YAML files from this repository and copy into the following locations in your Undercloud:

  • pure-controller-temp.yaml, pure-temp.yaml and cinder-pure-config.yaml into ~stack/templates/
  • cinder-pure.yaml into /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/controller/

RHOSP 10

NOTE: Red Hat OpenStack Platform 10 is still supported by Red Hat and Pure Storage.

Red Hat Openstack 10 is only supported with Red Hat Enterprise Linux 7.7

Red Hat and Pure Storage will not support Red Hat Openstack 10 after December 15, 2021.

Obtain the YAML files from this repository and copy into the following locations in your Undercloud:

  • pure-controller-temp.yaml, pure-temp.yaml and cinder-pure-config.yaml into ~stack/templates/
  • cinder-pure.yaml into /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/pre_deploy/controller/

RHOSP 13

NOTE: Red Hat OpenStack Platform 13 went End of Life on June 27, 2021 and entered Extended Support at this date. RHOSP 13 will not be supported by Red Hat or Pure Storage after June 27, 2023.

Copy the YAML files from this subdirectory into the following locations in your Undercloud:

  • pure-temp.yaml and cinder-pure-config.yaml into ~stack/templates/

Use the Dockerfile to create a Pure Storage specific Cinder Volume container:

$ docker build .

This newly created image can then be pushed to a registry that has been configured as the sources of images to be used by the RHOSP deployment.

Red Hat Certified versions of these containers can also be used. These can be found in the Red Hat Container Catalog. See https://catalog.redhat.com/software/containers/search?q=pure&p=1

Edit the overcloud container images environment file (usually overcloud_images.yaml, created when using the openstack overcloud container image prepare command) and change the appropriate parameter to use the custom container image.

RHOSP 14 and 15

NOTE: Red Hat OpenStack Platform 14 and 15 are no longer supported by Red Hat or Pure Storage.

Copy the YAML files from this subdirectory into the following locations in your Undercloud:

  • pure-temp.yaml and cinder-pure-config.yaml into ~stack/templates/

Use the Dockerfile to create a Pure Storage specific Cinder Volume container:

$ docker build .

This newly created image can then be pushed to a registry that has been configured as the sources of images to be used by the RHOSP deployment.

Red Hat Certified versions of these containers can also be used. These can be found in the Red Hat Container Catalog. See https://catalog.redhat.com/software/containers/search?q=pure&p=1

Edit the overcloud container images environment file (usually overcloud_images.yaml, created when using the openstack overcloud container image prepare command) and change the appropriate parameter to use the custom container image.

RHOSP 16 (RHEL8)

NOTE:

Red Hat Openstack 16.0 is no longer supported by Red Hat and Pure Storage.

Red Hat OpenStack 16.1 is only supported with Red Hat Enterprise Linux 8.2. Red Hat and Pure Storage will not support Red Hat Openstack 16.1 with Red Hat Enterprise Linux 8.2 after April 30, 2024

Red Hat OpenStack 16.2 is only supported with Red Hat Enterprise Linux 8.4.

Copy the YAML files from this subdirectory into the following locations in your Undercloud:

  • pure-temp.yaml and cinder-pure-config.yaml into ~stack/templates/

Use the Dockerfile to create a Pure Storage specific Cinder Volume container:

$ sudo buildah bud . -t "openstack-cinder-volume-pure:latest"

This newly created image can then be pushed to a local registry that has been configured as the sources of images to be used by the RHOSP deployment:

$ sudo openstack tripleo container image push --local <registry:port>/<directory>/openstack-cinder-volume-pure:latest

Red Hat Certified versions of these containers can also be used. These can be found in the Red Hat Container Catalog. See https://catalog.redhat.com/software/containers/search?q=pure&p=1

Edit the overcloud container images environment file (usually overcloud_images.yaml, created when using the openstack overcloud container image prepare command) and change the appropriate parameter to use the custom container image.

RHOSP 17 (RHEL8)

Copy the YAML files from this subdirectory into the following locations in your Undercloud:

  • pure-temp.yaml and cinder-pure-config.yaml into ~stack/templates/

Use the Dockerfile to create a Pure Storage specific Cinder Volume container:

$ sudo buildah bud . -t "openstack-cinder-volume-pure:latest"

This newly created image can then be pushed to a local registry that has been configured as the sources of images to be used by the RHOSP deployment:

$ sudo openstack tripleo container image push --local <registry:port>/<directory>/openstack-cinder-volume-pure:latest

Red Hat Certified versions of these containers can also be used. These can be found in the Red Hat Container Catalog. See https://catalog.redhat.com/software/containers/search?q=pure&p=1

Edit the overcloud container images environment file (usually overcloud_images.yaml, created when using the openstack overcloud container image prepare command) and change the appropriate parameter to use the custom container image.

All versions - Configure the Environment File

Edit ~/templates/cinder-pure-config.yaml and populate it with your specific FlashArray data.

In the parameter_defaults section of this file add the management virtual IP address of your FlashArray into the CinderPureSanIp parameter and the API Token you had from your FlashArray into the CinderPureAPIToken parameter.

Optionally, you can configure your FlashArray to use the iSCSI CHAP security protocol by changing the default parameter setting of false to be true in the parameter CinderPureUseChap.

Multiple Backends

If you wish to create multiple Pure backends then use CinderPureMultiConfig when modifying the ~/templates/cinder-pure-config.yaml as follows::

parameter_defaults:
  CinderPureBackendName:
    - tripleo_pure_1
    - tripleo_pure_2
  CinderPureStorageProtocol: 'iSCSI' # Default value for all Pure backends
  CinderPureUseChap: false # Default value for the Pure backends
  CinderPureMultiConfig:
    tripleo_pure_1:
      CinderPureSanIp: '10.0.0.1'
      CinderPureAPIToken: 'secret'
    tripleo_pure_2:
      CinderPureSanIp: '10.0.0.2'
      CinderPureAPIToken: 'anothersecret'
      CinderPureUseChap: true # Specific value for this backend

Requirements

To deploy the Pure Storage FlashArray Cinder driver you must meet the following requirements:

  • Pure Storage FlashArrays deployed and ready to be used as Cinderbackends
  • RHOSP Director user credentials to deploy the Overcloud
  • RHOSP Overcloud Controller nodes where the Cinder services will be installed

Deploying the Configured Backend

To deploy the single backend configured above, first, log in as the stack user to the Undercloud. Then deploy the backend (defined in the edited ~/templates/cinder-pure-config.yaml) by running the openstack overcloud deploy with the required switches for your deployment version together with an additonal templates file defined by –e ~/templates/cinder-pure-config.yaml:

$ openstack overcloud deploy --templates -e ~/templates/cinder-pure-config.yaml

If you passed any extra environment files when you created the Overcloud you must pass them again here using the –e option to avoid making undesired changes to the Overcloud.

Test the Configured Backend

After deploying the backend, test whether you can successfully create volumes on it. Doing so will require loading the necessary environment variables first. These variables are defined in /home/stack/overcloudrc by default.

To load these variables, run the following command as the stack user:

$ source /home/stack/overcloudrc

You should now be logged into the Controller node. From there you can create a volume type, which can be used to specify the back end you want to use (in this case the newly-defined backend). This is required in an OpenStack deployment where you have other backends enabled.

To create a volume type named pure, run:

$ cinder type-create pure

Next, map this volume type to the backend defined above and given the backend name tripleo_pure (as defined in through the CinderPureBackendName parameter) by running:

$ cinder type-key pure set volume_backend_name=tripleo_pure

You should now be able to create a 2GB volume on your newly defined backend by invoking its volume type. To do this run:

$ cinder create --volume-type pure 2

About

Files required for RHEL OpenStack Platform Cinder integration for Pure Storage FlashArray

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published