A remote control usb keyboard http server device based on ESP8266 & CH9328
(An UART adapter with DTR & RTS port is required)
- Open this project in PlatformIO
- Connect the device to your computer using an UART adapter
- Build and upload to the device
| UART Adapter | This Device |
|---|---|
| 3V3 | 3V3 |
| GND | GND |
| RX | TX |
| TX | RX |
| RTS | RST |
| DTR | IO0 |
- Plug the device to the host machine
- Connect to the device WiFi named
Keyboard, a config portal should appear - Choose to connect the same WiFi as your client machine network
- Open http://keyboard.local/
curl -X "POST" "http://keyboard.local/" \
-H 'Content-Type: application/json; charset=utf-8' \
-d $'{"input": "HelloWorld"}'or
POST http://keyboard.local/?input=helloworld
At the current stage of development, only printable characters are supported.
To support other keys I will need to make something like DuckyScript Parser.
But that's beyond the purpose of this project, the goal of this project is for game consoles such as Nintendo Switch/Playstation/Xbox etc.
| LED | Status |
|---|---|
| Blinking | No network is connected |
| Light | Successfully connected to a network and MDNS is initialized |
| Dark after blink | Successfully connected to a network but MDNS failed |