-
Notifications
You must be signed in to change notification settings - Fork 7
src/tty.c:55 tty_open: [TTY] Unable to open : No such file or directory #11
Comments
Just instead of uac=yes type: uac=on There is a bug in configuration parser. For This bug will be fixed soon. |
After setting asterisk-chan-quectel/src/at_response.c Line 1717 in 977d623
but after that, the sms block in incoming-mobile havent executed (no more log show on the console). I also tried receiving a short message (this msg is short so it wont be split in parts, which works well)
my extensions.conf (mainly copied from README.md):
|
I belive this multipart SMS issue is caused by non sequential order of receiving parts (e.g. 1,3,2). If parts of the SMS arrived sequentially, it would be sent to the dial plan. Try 2-parts SMS for example. This is a bug of course. It will be fixed soon. |
Hello, I've found that the #11 (comment) issue may relevant to the condition check inside
|
Change approved. Thank you. |
Hi, I'm using asterisk-chan-quectel at Debian 12, Asterisk 16.28.0 (debian maintained version), quectel EC20-CEFAG.
I build the driver use the command below and ensured that chan_quectel.so have been sucdessfully installed at
/usr/lib/asterisk/modules/chan_quectel.so
:My quectel.conf (the only change i made is enabled the uac):
However, when I start my quctel in the asterisk console using
quectel start quectel0
, I always got the following error:I've confirmed that this may not be a permissions issue, as I can use
minicom -D /dev/ttyUSB2
to send AT command to EC20 under theasterisk
user, and asterisk user have been added to the dialout and audio group. I could also use the similar config with the https://github.com/IchthysMaranatha/asterisk-chan-quectel driver , but no luck on this one.Considering the steps I've taken and the checks I've performed, I'm still encountering issues. Could anyone please advise on how I should further investigate this problem? Thanks in advanced.
The text was updated successfully, but these errors were encountered: