Skip to content

Robo3D/Slicing-Profiles

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

73 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Slicing profiles for the R2 and C2 printers

Optimized print settings for Cura 15.04, 2.3, and Simplify3D.

Installation

To install, simply download this repository as a ZIP file (or clone it if you're savvy) and import the appropriate profiles into Cura (15.04 or 2.3) and Simplify.

Standards

To ensure our printers perform that same for anyone that uses them, we have implemented a set of standards we suggest are followed:

  • START/END GCODE: Leave Blank. All START/END/PAUSE/CANCEL GCODE is handled in Octoprint.
  • RAFTS AS DEFAULT FOR C2: C2's non-heated bed works best with a raft.
  • RAFT BASE THICKNESS and FIRST LAYER THICKNESS: The first layer on the bed should have a thickness of 0.3mm and speed of 15mm/sec
  • PLA PREFERRED TEMPERATURE: We have found 190C to be the best printing temperature for all Robo PLA filament, and most off the shelf PLA filaments.

Requests and Issues

If you want to see support for a new slicer, or have a problem you'd like us to solve, please submit an issue above.

About

Optimized print settings for Cura and Simplify3D.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published