Skip to content

Latest commit

 

History

History
358 lines (253 loc) · 11.6 KB

Arch_Rebar_ColumnReinforcement_TwoTiesSixRebars.md

File metadata and controls

358 lines (253 loc) · 11.6 KB

Arch Rebar ColumnReinforcement TwoTiesSixRebars

Description

The Column Reinforcement TwoTiesSixRebars tool allows the user to create reinforcing bars (Two Ties Six Rebars) inside a Column Arch Structure object.

The Column Reinforcement TwoTiesSixRebars tool is also integrated into BIM Workbench.

This command is part of the Reinforcement Workbench, an external workbench that can be installed with the Addon Manager via the Tools → Addon manager → Reinforcement menu.

TwoTiesSixRebars Column Reinforcement inside a Column Arch Structure

Usage

1. Select any face of a previously created Arch Structure object. 2. Then select Column Reinforcement from the rebar tools. 3. A dialog box will pop-out on screen as shown below.

Dialog Box for the Arch Rebar ColumnReinforcement tool

4. Select the TwoTiesSixRebars type of column reinforcement from drop down menu on right side.

Dialog Box for the TwoTiesSixRebars ColumnReinforcement

5. Give inputs for data related to ties. 6. Click Next and the dialog box will be updated as shown below.

Dialog Box for Main Rebars data

7. Select desired rebar type and fill data for main rebars. 8. Click OK or Apply to generate column reinforcement. 9. Click Cancel to exit the dialog box.

Properties

Ties:

  • Left Cover: The distance between the left end of the tie to the left face of the structure.

  • Right Cover: The distance between the right end of the tie to right face of the structure.

  • Top Cover: The distance between tie from the top face of the structure.

  • Bottom Cover: The distance between tie from the bottom face of the structure.

  • Offset: The distance between tie from the top/bottom face of the structure.

  • Diameter: Diameter of the tie.

  • Bent Angle: Bent angle defines the angle at the ends of a tie.

  • Extension Factor: Extension Factor defines length of end of tie, expressed in times the diameter.

  • Number: The number of ties.

  • Spacing: The distance between the axes of each tie.

  • Ties Sequence: The sequence of ties from top to bottom with respect to front view.

Main Rebars: Rebars present at corners of tie

  • Rebar Type: Type of main rebars.

  • Hook Orientation: Orientation of LShaped hooks.

  • Hook Extend Along: Direction for hook extension.

  • Hook Extension: Length of hook of LShape rebars.

  • Rounding: A rounding value to be applied to the corners of the LShape rebars, expressed in times the diameter.

  • Top Offset: The distance between rebar from the top face of the structure.

  • Bottom Offset: The distance between rebar from the bottom face of the structure.

  • Diameter: Diameter of the main rebars.

Scripting

See also:

Arch API, Reinforcement API and FreeCAD Scripting Basics.

The ColumnReinforcement tool can be used in macros and from the Python console by using the following function:

Create Two Ties Six Rebars

RebarGroup = makeTwoTiesSixRebars(
    l_cover_of_ties,
    r_cover_of_ties,
    t_cover_of_ties,
    b_cover_of_ties,
    offset_of_ties,
    bent_angle_of_ties,
    extension_factor_of_ties,
    dia_of_ties,
    number_spacing_check,
    number_spacing_value,
    dia_of_main_rebars,
    t_offset_of_rebars,
    b_offset_of_rebars,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=None,
    facename=None,
)

  • Creates a RebarGroup object from the given structure, which is an Arch Structure, and facename, which is a face of that structure.

    • If no structure nor facename are given, it will take the user selected face as input.

  • l_cover_of_ties, r_cover_of_ties, t_cover_of_ties, b_cover_of_ties and offset_of_ties are inner offset distances for the tie elements with respect to the faces of the structure. They are respectively the left, right, top, bottom and front/rear offsets.

  • bent_angle_of_tiesdefine the angle of the tip of the reinforcement loop of tie elements.

  • extension_factor_of_tiesdefine the length of the tip of the reinforcement loop of tie elements, expressed in times the diameter of tie elements.

  • dia_of_tiesis the diameter of the tie elements.

  • number_spacing_checkif it is True it will create as many two ties sets as given by number_spacing_value; if it is False it will create two ties sets separated by the numerical value of number_spacing_value.

  • number_spacing_valuespecifies the number of two ties sets, or the value of the separation between the sets, depending on number_spacing_check.

  • dia_of_main_rebarsis the diameter of the main rebars.

  • t_offset_of_rebarsand b_offset_of_rebars are inner offset distances for the main rebars with respect to the top and bottom faces of the structure, respectively.

  • main_rebars_typeis the type of the main rebars; it can be "StraightRebar" or "LShapeRebar".

  • hook_orientationspecifies the orientation of LShaped hook; it can be: "Top Inside", "Top Outside", "Bottom Inside", "Bottom Outside", "Top Right", "Top Left", "Bottom Right" or "Bottom Left".

  • hook_extend_alongspecifies direction for hook extension; it can be "x-axis" or "y-axis".

  • l_rebar_roundingis the parameter that determines the bending radius of the LShaped main rebars, expressed as times the diameter.

  • hook_extensionis the length of hook of LShaped rebars.

  • ties_sequenceis the sequence of ties from top to bottom with respect to front view; it can be ("Tie1", "Tie2") or ("Tie2", "Tie1").

Example

import FreeCAD, Draft, Arch
from ColumnReinforcement import TwoTiesSixRebars

<translate>

# It doesn't work if the structure is not based on a face
</translate>
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure = Arch.makeStructure(Rect, height=1600)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
<translate>


# For Straight Rebars

</translate>
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=40,
    b_offset_of_rebars=40,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure,
    facename="Face6",
)
<translate>


# For LShaped Rebars with hook along x-axis

</translate>
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="x-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure,
    facename="Face6",
)
<translate>


# For LShaped Rebars with hook along y-axis and tie sequence

</translate> 
("Tie2", "Tie1")

RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="y-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie2", "Tie1"),
    structure=Structure,
    facename="Face6",
)

Edition of Two Ties Six Rebars

You can change the properties of the ties and rebars with the following function

rebar_group = editTwoTiesSixRebars(
    rebar_group,
    l_cover_of_ties,
    r_cover_of_ties,
    t_cover_of_ties,
    b_cover_of_ties,
    offset_of_ties,
    bent_angle_of_ties,
    extension_factor_of_ties,
    dia_of_ties,
    number_spacing_check,
    number_spacing_value,
    dia_of_main_rebars,
    t_offset_of_rebars,
    b_offset_of_rebars,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=None,
    facename=None,
)

  • rebar_groupis a previously created ColumnReinforcement group object.

  • The other parameters are the same as required by the makeSingleTieFourRebars() function.

  • structureand facename may be omitted so that the rebar stays in the original structure.

Example

from ColumnReinforcement import TwoTiesSixRebars

rebar_group = TwoTiesSixRebars.editTwoTiesSixRebars(
    rebar_group,                                
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="x-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie2", "Tie1"),
    structure=None,
    facename=None,
)

Reinforcement

documentation index > Reinforcement > Arch > Arch Rebar ColumnReinforcement TwoTiesSixRebars