Update SignalGeneratorSD.ino

SignalGeneratorSD.ino

@@ -116,8 +116,8 @@ Inhale new life into your Signal Generator! Enjoy!
 #define ENABLE_EEPROM   // sacve settings to EEPROM, recover them at startup
 #define ENABLE_MEANDRE05F_SIGMODE   // compatible with the new MD_AD9833 library only; if you do not need it - comment!
 #define NEW_WAY_INPUT_FREQ  // input frequency with jumping to the next digit position; Fast rotation adds 10 times more
+#define RUNNING_FREQUENCY   // The value of frequency is applied "on the fly" with a small 0.5 sec delay. The new frequency value is applied in 0.5 sec after your input is complete.
 #define ENABLE_VOUT_SWITCH  // developped an extra output circuit that switch meander logic level of eather 3.3v or 5v; switched from menu by pin 6
-#define RUNNING_FREQUENCY  // The value of frequency is applied "on the fly" with a small 0.5 sec delay. The new frequency value is applied in 0.5 sec after your input is complete.
 #define EEPROM_ADDRESS_SHIFT 0  // start address in EEPROM to store settings; if EEPROM is vanished and you start getting "EEPROM CRC Error" at launch, change the start address to shift to the other unused EEPROM area
 //#define SWAP_ENCODER_DIRECTION  // swap if encoder is rotating in the wrong direction
 //#define USE_PHASE    //Uncomment the line below if you want to change the Phase instead of the FREQ register // never use or tested