Initial untested version.

.gitmodules

@@ -285,6 +285,10 @@
 	path = Sming/Libraries/ModbusMaster/ModbusMaster
 	url = https://github.com/nomis/ModbusMaster.git
 	ignore = dirty
+[submodule "Libraries.Melopero_AMG8833"]
+	path = Sming/Libraries/AMG8833/Melopero_AMG8833
+	url = https://github.com/melopero/Melopero_AMG8833_Arduino_Library.git
+	ignore = dirty
 [submodule "Libraries.MCP_CAN_lib"]
 	path = Sming/Libraries/MCP_CAN_lib
 	url = https://github.com/coryjfowler/MCP_CAN_lib.git

Sming/Libraries/AMG8833/README.rst

@@ -0,0 +1,33 @@
+AMG8833
+=======
+
+.. highlight:: c++
+
+Introduction
+------------
+
+A library to communicate with the cheap `thermal sensor AMG8833 <https://mediap.industry.panasonic.eu/assets/imported/industrial.panasonic.com/cdbs/www-data/pdf/ADI8000/ADI8000C66.pdf>`_.
+
+Using
+----- 
+
+1. Add ``COMPONENT_DEPENDS += AMG8833`` to your application componenent.mk file.
+2. Add these lines to your application::
+
+	#include <Melopero_AMG8833.h>
+	
+	namespace
+	{
+	  Melopero_AMG8833 sensor;
+	
+	  // ...
+	
+	} // namespace
+		
+	void init()
+	{
+		Wire.begin();
+		sensor.initI2C();
+		
+		// ...
+	}

Sming/Libraries/AMG8833/component.mk

@@ -0,0 +1,4 @@
+COMPONENT_SUBMODULES := Melopero_AMG8833
+
+COMPONENT_SRCDIRS := $(COMPONENT_SUBMODULES)/src
+COMPONENT_INCDIRS := $(COMPONENT_SRCDIRS)

Sming/Libraries/AMG8833/samples/TemperatureMatrix/Makefile

@@ -0,0 +1,9 @@
+#####################################################################
+#### Please don't change this file. Use component.mk instead ####
+#####################################################################
+
+ifndef SMING_HOME
+$(error SMING_HOME is not set: please configure it as an environment variable)
+endif
+
+include $(SMING_HOME)/project.mk

Sming/Libraries/AMG8833/samples/TemperatureMatrix/README.rst

@@ -0,0 +1,12 @@
+Temperature Matrix
+==================
+
+A simple demonstrating how to handle interrupts with the Melopero AMG8833 sensor.
+The sensor communicates through I2C. Connection scheme::
+ 
+	Microcontroller ----------- Melopero AMG8833
+		       3.3V ----------- VIN
+		       GND  ----------- GND
+		       SCL  ----------- SCL
+		       SDA  ----------- SDA
+	 a valid INT Pin----------- INT

Sming/Libraries/AMG8833/samples/TemperatureMatrix/app/application.cpp

@@ -0,0 +1,103 @@
+#include <SmingCore.h>
+#include <Melopero_AMG8833.h>
+
+Melopero_AMG8833 sensor;
+
+namespace
+{
+const byte interruptPin = 2;
+
+Timer procTimer;
+bool state = true;
+
+bool interruptOccurred = false;
+
+//The high and low temperature thresholds. If a temperature that exceeds
+//these values is detected an interrupt will be triggered. The temperatures
+//are expressed in Celsius degrees.
+float highThreshold = 26.5;
+float lowThreshold = 10;
+
+void onInterrupt()
+{
+	interruptOccurred = true;
+}
+
+void loop()
+{
+	//Update the sensors thermistor temperature and print it.
+	Serial.print("Updating thermistor temperature ... ");
+	int statusCode = sensor.updateThermistorTemperature();
+	Serial.println(sensor.getErrorDescription(statusCode));
+
+	Serial.print("Thermistor temp: ");
+	Serial.print(sensor.thermistorTemperature);
+	Serial.println("°C");
+
+	//Check if an interrupt occurred.
+	//The interrupt occurred flag gets set by the interrupt service routine
+	//each time an interrupt is triggered.
+	if(interruptOccurred) {
+		interruptOccurred = false;
+		Serial.println("Interrupt triggered!");
+
+		//Update the interrupt matrix to know which pixels triggered the interrupt.
+		Serial.print("Updating interrupt matrix ... ");
+		statusCode = sensor.updateInterruptMatrix();
+		Serial.println(sensor.getErrorDescription(statusCode));
+
+		//Print out the interrupt matrix.
+		Serial.println("Interrupt Matrix: ");
+		for(int x = 0; x < 8; x++) {
+			for(int y = 0; y < 8; y++) {
+				Serial.print(sensor.interruptMatrix[y][x]);
+				Serial.print(" ");
+			}
+			Serial.println();
+		}
+	}
+}
+
+} // namespace
+
+void init()
+{
+	Wire.begin();
+	sensor.initI2C();
+	// To use Wire1 (I2C-1):
+	// Wire1.begin();
+	// sensor.initI2C(AMG8833_I2C_ADDRESS_B, Wire1);
+
+	//Reset the device flags and settings and read the returned status code.
+	Serial.print("Resetting sensor ... ");
+	int statusCode = sensor.resetFlagsAndSettings();
+
+	//Check if there were any problems.
+	Serial.println(sensor.getErrorDescription(statusCode));
+
+	//Setting the FPS_MODE this can be: FPS_MODE::FPS_10 or FPS_MODE::FPS_1
+	Serial.print("Setting FPS ... ");
+	statusCode = sensor.setFPSMode(FPS_MODE::FPS_10);
+	Serial.println(sensor.getErrorDescription(statusCode));
+
+	//Setting the threshold values
+	Serial.print("Setting threshold values ... ");
+	statusCode = sensor.setInterruptThreshold(lowThreshold, highThreshold);
+	Serial.println(sensor.getErrorDescription(statusCode));
+	Serial.print("low threshold : ");
+	Serial.print(lowThreshold);
+	Serial.print(" high threshold : ");
+	Serial.println(highThreshold);
+
+	//Enable the interrupt.
+	Serial.print("Enabling interrupt ... ");
+	statusCode = sensor.enableInterrupt();
+	Serial.println(sensor.getErrorDescription(statusCode));
+
+	//Configuring the interrupt pin to listen for the interrupt.
+	pinMode(interruptPin, INPUT_PULLUP);
+	//Attaching our function onInterrupt to the interrupt.
+	attachInterrupt(interruptPin, onInterrupt, CHANGE);
+
+	procTimer.initializeMs(100, loop).start();
+}

Sming/Libraries/AMG8833/samples/TemperatureMatrix/component.mk

@@ -0,0 +1 @@
+COMPONENT_DEPENDS := AMG8833