Model analysis

10. Run axial analysis
    1. In the “Map” tab select the “axial_map” layer (no errors)
    2. In the “Unlinks” tab select the “unlinks” layer (no errors)
    3. Select the “depthmapX remote” tab
    4. Type values in the Radius field: “2, 4,n”
    5. Type new name for the Output table (optional)
    6. Click Calculate
    7. Notice the warning message
    8. Start the depthmapX software
    9. Click Calculate
    10. Open the Attribute Table of the axial layer or the newly created layer
11. Run segment analysis
    1. Still in the “depthmapX remote” tab...
    2. Select the segment option
    3. Type values in the Radius field: “400, 800” (not n, it's slow)
    4. Check the “Weight” box and select “Segment Length”
    5. Click the Settings button
    6. Check the “Calculate full set of measures” (optional)
    7. Click “Ok” to close the “Advance Settings” dialog
    8. Type new name for the Output table (optional)
    9. Click “Calculate”
    10. Wait...
    11. Open the Attribute Table of the newly created layer
    12. Switch off all “axial” map layers, leaving only the segment layer
    13. Notice the difference in the model: trimmed line ends
    14. Select individual axial sements (Select Features tool)