MAccel

Mouse acceleration program based off povohat's program 'interaccel', found here: http://mouseaccel.blogspot.com/p/blog-table-of-contents.html

This program requires the following driver to be installed: https://github.com/oblitum/Interception

Any file in the interception folder is a part of the Interception project and not owned by me.

Deprecation notice

This program has been deprecated in favor of RawAccel. Anticheats seem to hate the Interception driver, so it is recommended to use RawAccel instead.

To convert settings to RawAccel (from RawAccel defaults): This conversion only works for assume-constant-rate=1. There is no correct conversion for assume-constant-rate=0. For converting assume-constant-rate=0, simply use updates-per-second as the actual mouse polling rate.

• Check "By Component" in the "Anistropy" tab.
• Set "Sens Multiplier" to x-post-scale * x-multiplier
• Set "Y/X Ratio" to (y-post-scale * y-multiplier) / (x-post-scale * x-multiplier)
• Set X and Y mode to "Classic"
• Uncheck Gain for both X and Y
• Set for X and Y: Input Offset = 0.0, Cap Type = Output, Cap. Output = 0.0
• Set Acceleration for X and Y separately to be = pre-scale * multiplier / (1000 / updates-per-second).
• Set Power for X and Y separately to be power + 1.

In the settings.json, set Polling rate to 1000Hz and DPI to 0. This will completely disable the additional scaling done by RawAccel for these values.