This is a sample project based on the WPILib sample build system for building Java based vision targeting for running on systems other than the roboRIO. The object of this project is to make it easy to design, develop, code, test, and deploy FIRST WPILib vision processing apps from a Windows workstation. This project currently supports the following target platforms with a Windows development environment:
- Windows on x86 or x86_64
- Raspberry Pi running Raspbian
- Linux on x86 or x86_64 - not tested
- Generic Armhf devices (such as the BeagleBone Black or the Jetson) - not tested
- VSCode
- Plugins
- Language Support for Java by Red Hat
- Python
- Plugins
- Git
- Lots of setup dialogs. Just take all the defaults.
- Python3
- Be sure to add Python to path. It is an unchecked option on the install dialog.
- pip (automatic for Windows)
- Java 8
- But now will work with Java 11 on development system
- gstreamer
- Run the complete install instead of the typical install.
- Double check that the gstreamer directory is in your path. On Windows, this should be
the c:\gstreamer\1.0\x86_64\bin directory. If you go to a command prompt, and type
gst-launch-1.0 --helpyou should get help for the command. If you get file not found, it is not in your path.
- Bonjour
- Optional. If you want to access roboRio or raspberry pi by hostname without registering in DNS. If you have the driver station installed, Bonjour protocol is already installed.
As there is no way to autodetect which system you want to build for, such as building for a Raspberry Pi on a windows desktop, you have to manually select which system you want to build for.
To do this, use the -Ptarget="target" parameter for the gradle build. The valid targets are windows (the default), arm-raspbian, armhf. So for example, to build for the raspberry pi, use gradlew build -Ptarget="arm-raspbian".
When you change targets, you should run a clean gradlew clean in order to
clear out any old artifacts from other targets.
The original WPILib sample only supported getting camera input from the roboRio when running vision processing on Windows. This made developing/testing on a Windows platform impractical. It did support direct USB connect, but only via raspbian. So you could debug on Windows, but you had to remote run the application on raspbian. Again, troublesome.
Instead, this sample has been expanded to use a utility gstreamer to grab output from a USB connected camera from either platform.
Further, an MJPEG streaming server is included to make it possible for the image processing application to simply reference a streaming source over HTTP using the WPILib HttpCamera class, even if you do not have a network camera. This streaming source can be from a local USB camera, or you can offload image streaming to a another device and separate image processing from streaming. Keep your source code the same regardless of where your camera is.
You can run gradlew build to run a build for a Windows target. First, be sure to modify the constants at the top of the CameraVision/build.gradle file per the comments.
When doing this, the output files will be placed into bin\. From there, you can run either the .bat file on windows or the shell script on unix in order to run your project. Note that Linux workstations have not been tested yet (should work - someone want to help me test?).
You can also run the project from the VSCode debugger locally and remotely using the built-in task and launch settings.
To debug locally, check the comments in the CameraVision/.vscode/launch.json and tasks.json files. Then, from the debug pane, launch Debug (Launch)-Main<CameraVision>. A build will run, then the network tables simulator and the webcam streaming apps will start. Finally, the CameraVision project will start in the interactive debugger.
To debug remotely from a workstation to the CameraVision application running on a Raspberry Pi, check the comments in the CameraVision/.vscode/launch.json file. Run a build and deploy using the appropriate target (see next section). Login in to the remote system and run bin/startup-debug.sh. Then, from the debug pane, launch Debug visioncoproc.local (Attach) (CameraVision).
If you are building for another platform, trying to run gradlew build -Ptarget=<target> will not work, as tests will not run on Windows targeting another platform. You can run gradlew build -x test -Ptarget=<target> to ignore tests.
In that case, when you run the build, runtimes for the target selected will be placed in bin\. All you have to do is copy this file to the target system, excluding the virtual python directory, then run the .bat or shell script to run your program. You will also need to install the python packages built in the CameraServer and NTSimulator project directories ./build/python/dist. Those packages can be installed with pip3 install -U <package.zip>.
Finally, if buildType is targeting raspbian, a gradlew deploy -x test -Ptarget="arm-raspbian" task exists to build and deploy the project automatically to a raspberry pi. No dependencies are required to be installed on the pi other than the stretch distro. The deploy task will automatically install them. Edit the root build.gradle file and change the remotes section to identify the host, username, and password of the target Raspberry Pi.
You can develop and test a WPILib image processing application without needing a robot. You can develop and test on Windows and then deploy on a raspberry pi. You can use a USB camera on either platform locally, or you can offload image capture to another device and not change image processing code.
JUnit and Mockito have been used to demonstrate automated testing of vision processing application, which factors out external dependencies (like having to have a camera plugged in).
This complete sample gets an image from a local camera stream. It then restreams the input image in it's raw form in order to make it viewable on another system. It then creates an OpenCV sink from the camera, which allows us to grab OpenCV images. It then creates an output stream for an OpenCV image, for instance, so you can stream an annotated image. In addition, a NetworkTables simultated server is set up, so you can send data regarding the targets to a server that simulates a robot. A command line arg enables you to change this setting. Command lines args are as follows:
--team or -t = "FIRST team number"
--nthost or -h = "NetworkTables server host IP address (for testing)"
--nont or -n = "Do not call out to network tables to write interpreted values"
--cameraurl or -c = "Use specified MJPEG over http streaming source"
--help = "Get help"
After building the project, go to ./bin and run startup.bat (for Windows). Note that git-bash shells will not work. Use the default Windows shell.
The build script provides a few other configuration options. These include selecting the main class name, and providing an output name for the project.
Please see the build.gradle file for where to change these.
Having trouble executing tests that depend on Java Native Interfaces (JNI) like opencv? See this Chief Delphi Post.