Skip to content

Tisma09/ProjetCamera

Repository files navigation

Program for controlling a Sony EVI-D70/D70P camera

en fr

This program allows for controlling a camera using the VISCA protocol along with the RS-232 communication standard.

The supported commands enable the camera to be oriented in all directions. These commands are located in the CameraVisca.h and CameraVisca.cpp files and can be modified using the VISCA commands listed in this manual.

Depending on the camera configuration (whether it is intended to be mounted upside down or not), it is possible that the directions may be inverted.

➤ Supported Device

  • Windows
  • Arduino Mega

🛠️ Installation and Dependencies

Windows

  • CMake or an IDE supporting CMake

Arduino

  • Arduino IDE or an IDE supporting Arduino SDK (e.g., Visual Studio with the vMicro extension)

🧑🏻‍💻 Usage

For Windows

In SerialPC.hpp, check and redefine if necessary the COM port number being used. You can find this number in the Device Manager.

static const char* device = "\\\\.\\COM6"; // Définition du port 

You can now compile and run the program using CMake or any development environment that includes CMake.

Control is done using the ZQSD keys. You can now control the camera!

For Arduino

In KeyboardArduino.hpp, check and redefine if necessary the pins corresponding to the connections of your buttons (currently configured for Up: pin 52, Down: pin 46, Right: pin 50, Left: pin 48).

Open ProjetCamera.ino in Arduino IDE or another IDE capable of uploading a program to your Arduino.

Upload the code. You can now control the camera!

About

A program to move a Camera Sony EVI-D70/D70P

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published