Vision Components MIPI CSI-2 driver for NXP SoMs

Version 0.3.0.pre1 (History)

• Supported system on modules

  • Toradex Verdin iMX8M Plus
  • Toradex Verdin iMX8M Mini
  • Variscite DART-MX8M-PLUS

• Supported carrier boards

  • Toradex Dahlia Carrier Board
  • Variscite DART-MX8M-PLUS Evaluation Kits

• Supported board support packages

  • Toradex Yocto Project 6.6.0
  • Variscite Kirkstone 5.15.71

• Supported VC MIPI Camera Modules

  • IMX290, IMX327, IMX462

• Features

  • Quickstart script for an easier installation process
  • Auto detection of VC MIPI camera modules
  • Image Streaming in GREY, Y10, Y12, SRGGB8, SRGGB10, SRGGB12, SGBRG8, SGBRG10, SGBRG12 format
  • Exposure can be set via V4L2 control 'exposure'
  • Gain can be set via V4L2 control 'gain'
  • Trigger mode '0: disabled', '1: external', '2: pulsewidth', '3: self', '4: single', '5: sync', '6: stream_edge', '7: stream_level' can be set via device tree or V4L2 control 'trigger_mode'
    • Software trigger can be executed by V4L2 control 'single_trigger'
  • IO mode '0: disabled', '1: flash active high', '2: flash active low', '3: trigger active low', '4: trigger active low and flash active high', '5: trigger and flash active low' can be set via device tree or V4L2 control 'flash_mode'
  • Frame rate can be set via V4L2 control 'frame_rate' (except OV9281)
  • Black level can be set via V4L2 control 'black_level' (except OV7251 and OV9281)
  • ROI cropping can be set via device tree properties active_l, active_t, active_w and active_h or v4l2-ctl.
  • Binning mode can be set via V4L2 control 'binning_mode' (IMX412, IMX565, IMX566, IMX567, IMX568 only)

Quickstart

Toradex

• Follow the instructions to Build a Reference Image with Yocto Project/OpenEmbedded

Variscite

• Follow the instructions to Build Yocto from source code