1.3.0.7 Bugfix

Fixes half undressing maids that have temporary outfits on.

What's Changed

• Use temporary filename as base check for partial undress by @Vin-meido in #2

Full Changelog: v1.3.0.6...v1.3.0.7

1.3.0.6

** update: 6 hours after release **: Uploaded the wrong release build. It contains the correct fixes, but it's not the most recent one. Make sure to re-download the correct dlls again. Apologies.

=========

This fixes a hard crash of the game.

If you've encountered the game to exit before with the message "Oops! The game crashed. The crash report folder...", then the plugin is most likely the culprit (if you have it installed).

Just replace the dll in BepInEx\plugins\ to update and fix.

There may yet still be very rare crashes happening and we are unsure if the plugin is still the cause, but most reports say that the fixes introduced seems to have resolved the crashes.

IMPORTANT

Since there may yet still be rare crashes, the plugin is now disabled by default. This is to prevent crashes for people that unknowingly install the plugin because of a CMI installation preset.

To enable use of the plugin, tick the enable setting in F1 configuration manager.

Should you still encounter the same kind of crashes, file a bug here or report in #plugin-dev-workshop of Custom Maid Server discord (https://discord.gg/custommaid).

Thanks to Lombra and Cellmate of Custom Maid Server discord for help on further debugging this inconsistent issue.

Full Changelog: v1.3.0.4...v1.3.0.6

1.3.0.6 Pre-release 1

This is an attempt to fix a game crash caused by the plugin.

If you've encountered the game to exit before with the message "Oops! The game crashed. The crash report folder...", then the plugin is most likely the culprit (if you have it installed). This pre release is an effort to fix it. Just replace the dll in BepInEx\plugins\.

Should you still encounter the same kind of crashes, file a bug here or report in #plugin-dev-workshop of Custom Maid Server discord (https://discord.gg/custommaid).

Thanks to Lombra and Cellmate of Custom Maid Server discord for help on further debugging this inconsistent issue.

Full Changelog: v1.3.0.4...v1.3.0.6-pre.1

1.3.0.4

This is for CMI emergency disable. The plugin may cause startup crashes.

We've added a enable setting for this plugin. If you still wish to use it, you can enable the plugin in F1 settings and restart your game. Bear in mind that the plugin may cause startup crashes as a result.

1.3.0.3

Possible crash fix.

Not sure if this plugin is indeed the cause, but this is a small optimization as well anyway, so might as well. The plugin no longer needs to do an Atlas scan from resources (we load directly via path), which should be much more efficient.

1.3.0.2

Library version updates: COM3D2 2.15.1 / BepInEx 5.4.19

Full Changelog: v1.3.0.1...v1.3.0.2

1.3.0.1

1.3.0.1 Minor bugfix release

This release fixes a bug where the plugin is unable to hook into unityinjector due to being loaded first. In addition:

• The plugin window now resizes based on the number of dress items you can toggle

1.3.0 Minor feature release

Note 1: As of version 1.1.1, Undress Utility is now included as an option in CMI. If you are using it to manage your plugins, use the installer to install this plugin. If you wish to update, wait for a new release of CMI to include this update.

Note 2: The plugin now requires COM3D2API. If you are using CMI, you should already have it. If not, get it from (https://github.com/DeathWeasel1337/COM3D2_Plugins).

1.3.0 Implements a few improvements / changes specially when operating in yotogi mode:

• Since the implementation of the gear menu icon, Auto show has now been disabled by default for both VR and non-VR modes. You can enable this again in F1 settings.
• It is now possible to keep dress states in between yotogi skills. You can enable this in the F1 settings (works both in normal and recollection mode yotogi)

Known issues

(EN and JP COM3D2 only) Some stuttering may occur when switching into Half Undress mode for the first time in a scene. Subsequent switching in and out of the mode should be fine. This will be further optimized in a later update.

The undress window can block certain interface elements at times, which can be annoying when in auto show is enabled. Disable auto show if this is too much of an issue (or move the window away). Window resizing is in the works.

Installation

See README.md for installation instructions

Full Changelog: v1.2.0...v1.3.0.1

1.3.0

1.3.0 Minor feature release

Note 1: As of version 1.1.1, Undress Utility is now included as an option in CMI. If you are using it to manage your plugins, use the installer to install this plugin. If you wish to update, wait for a new release of CMI to include this update.

Note 2: The plugin now requires COM3D2API. If you are using CMI, you should already have it. If not, get it from (https://github.com/DeathWeasel1337/COM3D2_Plugins).

1.3.0 Implements a few improvements / changes specially when operating in yotogi mode:

• Since the implementation of the gear menu icon, Auto show has now been disabled by default for both VR and non-VR modes. You can enable this again in F1 settings.
• It is now possible to keep dress states in between yotogi skills. You can enable this in the F1 settings (works both in normal and recollection mode yotogi)

Known issues

(EN and JP COM3D2 only) Some stuttering may occur when switching into Half Undress mode for the first time in a scene. Subsequent switching in and out of the mode should be fine. This will be further optimized in a later update.

The undress window can block certain interface elements at times, which can be annoying when in auto show is enabled. Disable auto show if this is too much of an issue (or move the window away). Window resizing is in the works.

Installation

See README.md for installation instructions

Full Changelog: v1.2.0...v1.3.0

1.2.0

1.2.0 Cleanup release

Note 1: As of version 1.1.1, Undress Utility is now included as an option in CMI. If you are using it to manage your plugins, use the installer to install this plugin. If you wish to update, wait for a new release of CMI to include this update.

Note 2: This release does not contain any new notable features. If 1.1.1 is working fine for you, you do not need to update immediately (just wait for the next release of CMI). However, if you are encountering performance problems and what it fixed now, then you may manually install this update.

Note 3: The plugin now requires COM3D2API. If you are using CMI, you should already have it. If not, get it from (https://github.com/DeathWeasel1337/COM3D2_Plugins).

1.2.0 cleans up a few of the performance problems of the plugin, particularly a nasty performance issue in yotogi mode:

• Fixes major stuttering issue when executing yotogi actions, even when the undress window is hidden.
• A separate setting for auto showing in yotogi has been implemented. This is disabled by default. If you want the old behaviour of the plugin showing up in yotogi (specially for 2.5 X0), enable this new setting in F1 settings menu.
• A separate setting for Auto-showing in VR has been implemented (enabled by default to maintain original behaviour)
• A gear menu icon has been added to provide a way of toggling the undress window (when auto mode has been disabled in both VR and non-VR)

Known issues

(EN and JP COM3D2 only) Some stuttering may occur when switching into Half Undress mode for the first time in a scene. Subsequent switching in and out of the mode should be fine. This will be further optimized in a later update.

(All game versions) When disabling Auto show in VR, there is currently no way to show the undress window in VR other than the keyboard shortcut. An alternate way that does not rely on keyboard shortcuts will be implemented in the future.

Installation

See README.md for installation instructions

Full Changelog: v1.1.1...v1.2.0-2

1.2.0 Pre release 1

1.2.0 Cleanup release

Note 1: As of version 1.1.1, Undress Utility is now included as an option in CMI. If you are using it to manage your plugins, use the installer to install this plugin. If you wish to update, wait for a new release of CMI to include this update.

Note 2: This release does not contain any new notable features. If 1.1.1 is working fine for you, you do not need to update immediately (just wait for the next release of CMI). However, if you are encountering performance problems and what it fixed now, then you may manually install this update.

1.2.0 cleans up a few of the performance problems of the plugin, particularly a nasty performance issue in yotogi mode:

• Fixes major stuttering issue when executing yotogi actions, even when the undress window is hidden.
• A separate setting for auto showing in yotogi has been implemented. This is disabled by default. If you want the old behaviour of the plugin showing up in yotogi (specially for 2.5 X0), enable this new setting in F1 settings menu.
• A separate setting for Auto-showing in VR has been implemented (enabled by default to maintain original behaviour)

Known issues

(EN and JP COM3D2 only) Some stuttering may occur when switching into Half Undress mode for the first time in a scene. Subsequent switching in and out of the mode should be fine. This will be further optimized in a later update.

(All game versions) When disabling Auto show in VR, there is currently no way to show the undress window in VR other than the keyboard shortcut. An alternate way that does not rely on keyboard shortcuts will be implemented in the future.

Installation

See README.md for installation instructions

Full Changelog: v1.1.1...v1.2.0