Skip to content

WebPatient/openpilot

 
 

Repository files navigation

Welcome to openpilot

openpilot is an open source driving agent. Currently, it performs the functions of Adaptive Cruise Control (ACC) and Lane Keeping Assist System (LKAS) for selected Honda, Toyota, Acura, Lexus, Chevrolet, Hyundai, Kia. It's about on par with Tesla Autopilot and GM Super Cruise, and better than all other manufacturers.

The openpilot codebase has been written to be concise and to enable rapid prototyping. We look forward to your contributions - improving real vehicle automation has never been easier.

Table of Contents


Community

openpilot is developed by comma.ai and users like you.

We have a Twitter you should follow.

Also, we have a several thousand people community on slack.

Hardware

Right now openpilot supports the EON Dashcam DevKit. We'd like to support other platforms as well.

Install openpilot on a neo device by entering https://openpilot.comma.ai during NEOS setup.

Supported Cars

Make Model Supported Package Lateral Longitudinal No Accel Below No Steer Below Giraffe
Acura ILX 2016-17 AcuraWatch Plus Yes Yes 25mph1 25mph Nidec
Acura RDX 2018 AcuraWatch Plus Yes Yes 25mph1 12mph Nidec
Chevrolet3 Malibu 2017 Adaptive Cruise Yes Yes 0mph 7mph Custom7
Chevrolet3 Volt 2017-18 Adaptive Cruise Yes Yes 0mph 7mph Custom7
Honda Accord 2018 All Yes Stock 0mph 3mph Bosch
Honda Civic 2016-18 Honda Sensing Yes Yes 0mph 12mph Nidec
Honda Civic 2017-18 (Hatch) Honda Sensing Yes Stock 0mph 12mph Bosch
Honda CR-V 2015-16 Touring Yes Yes 25mph1 12mph Nidec
Honda CR-V 2017-18 Honda Sensing Yes Stock 0mph 12mph Bosch
Honda Odyssey 2017-19 Honda Sensing Yes Yes 25mph1 0mph Inverted Nidec
Honda Pilot 2016-18 Honda Sensing Yes Yes 25mph1 12mph Nidec
Honda Pilot 2019 All Yes Yes 25mph1 12mph Inverted Nidec
Honda Ridgeline 2017-18 Honda Sensing Yes Yes 25mph1 12mph Nidec
Hyundai Santa Fe 2019 All Yes Stock 0mph 0mph Custom6
Hyundai Elantra 2017 SCC + LKAS Yes Stock 19mph 34mph Custom6
Hyundai Genesis 2018 All Yes Stock 19mph 34mph Custom6
Kia Sorento 2018 All Yes Stock 0mph 0mph Custom6
Kia Stinger 2018 SCC + LKAS Yes Stock 0mph 0mph Custom6
Lexus RX Hybrid 2016-18 All Yes Yes2 0mph 0mph Toyota
Toyota Camry 20184 All Yes Stock 0mph5 0mph Toyota
Toyota C-HR 2017-184 All Yes Stock 0mph 0mph Toyota
Toyota Corolla 2017-18 All Yes Yes2 20mph 0mph Toyota
Toyota Highlander 2017-18 All Yes Yes2 0mph 0mph Toyota
Toyota Highlander Hybrid 2018 All Yes Yes2 0mph 0mph Toyota
Toyota Prius 2016 TSS-P Yes Yes2 0mph 0mph Toyota
Toyota Prius 2017-18 All Yes Yes2 0mph 0mph Toyota
Toyota Prius Prime 2017-18 All Yes Yes2 0mph 0mph Toyota
Toyota Rav4 2016 TSS-P Yes Yes2 20mph 0mph Toyota
Toyota Rav4 2017-18 All Yes Yes2 20mph 0mph Toyota
Toyota Rav4 Hybrid 2017-18 All Yes Yes2 0mph 0mph Toyota

1Comma Pedal is used to provide stop-and-go capability to some of the openpilot-supported cars that don't currently support stop-and-go. Here is how to build a Comma Pedal. NOTE: The Comma Pedal is not officially supported by comma.ai
2When disconnecting the Driver Support Unit (DSU), otherwise longitudinal control is stock ACC. For DSU locations, see Toyota Wiki page
3GM installation guide.
4It needs an extra 120Ohm resistor (pic1, pic2) on bus 3 and giraffe switches set to 01X1 (11X1 for stock LKAS), where X depends on if you have the comma power.
528mph for Camry 4CYL L, 4CYL LE and 4CYL SE which don't have Full-Speed Range Dynamic Radar Cruise Control.
6Open sourced Hyundai Giraffe is designed ofor the 2019 Sante Fe; pinout may differ for other Hyundais.
7Community built Giraffe, find more information here, GM Giraffe

Community Maintained Cars

Make Model Supported Package Lateral Longitudinal No Accel Below No Steer Below Giraffe
Honda Fit 2018 Honda Sensing Yes Yes 25mph1 12mph Inverted Nidec
Tesla Model S 2012 All Yes Not yet Not applicable 0mph Custom8
Tesla Model S 2013 All Yes Not yet Not applicable 0mph Custom8

[Honda Fit Pull Request].
[Tesla Model S Pull Request]
8Community built Giraffe, find more information here Community Tesla Giraffe

Community Maintained Cars are not confirmed by comma.ai to meet our safety model. Be extra cautious using them.

In Progress Cars

  • All TSS-P Toyota with Steering Assist.
    • 'Full Speed Range Dynamic Radar Cruise Control' is required to enable stop-and-go. Only the Prius, Camry and C-HR have this option.
    • Even though the Tundra, Sequoia and the Land Cruiser have TSS-P, they don't have Steering Assist and are not supported.
    • Only remaining Toyota cars with no port yet are the Avalon and the Sienna.
  • All LSS-P Lexus with Steering Assist or Lane Keep Assist.
    • 'All-Speed Range Dynamic Radar Cruise Control' is required to enable stop-and-go. Only the GS, GSH, F, RX, RXH, LX, NX, NXH, LC, LCH, LS, LSH have this option.
    • Even though the LX have TSS-P, it does not have Steering Assist and is not supported.
  • All Hyundai with SmartSense.
  • All Kia with SCC and LKAS.

How can I add support for my car?

If your car has adaptive cruise control and lane keep assist, you are in luck. Using a panda and cabana, you can understand how to make your car drive by wire.

We've written guides for Brand and Model ports. These guides might help you after you have the basics figured out.

  • BMW, Audi, Volvo, and Mercedes all use FlexRay and are unlikely to be supported any time soon.
  • We put time into a Ford port, but the steering has a 10 second cutout limitation that makes it unusable.
  • The 2016-2017 Honda Accord uses a custom signaling protocol for steering that's unlikely to ever be upstreamed.

Directory structure

.
├── apk                 # The apk files used for the UI
├── cereal              # The messaging spec used for all logs on EON
├── common              # Library like functionality we've developed here
├── installer/updater   # Manages auto-updates of openpilot
├── opendbc             # Files showing how to interpret data from cars
├── panda               # Code used to communicate on CAN and LIN
├── phonelibs           # Libraries used on EON
├── pyextra             # Libraries used on EON
└── selfdrive           # Code needed to drive the car
    ├── assets          # Fonts and images for UI
    ├── boardd          # Daemon to talk to the board
    ├── can             # Helpers for parsing CAN messages
    ├── car             # Car specific code to read states and control actuators
    ├── common          # Shared C/C++ code for the daemons
    ├── controls        # Perception, planning and controls
    ├── debug           # Tools to help you debug and do car ports
    ├── locationd       # Soon to be home of precise location
    ├── logcatd         # Android logcat as a service
    ├── loggerd         # Logger and uploader of car data
    ├── proclogd        # Logs information from proc
    ├── sensord         # IMU / GPS interface code
    ├── test            # Car simulator running code through virtual maneuvers
    ├── ui              # The UI
    └── visiond         # Embedded vision pipeline

To understand how the services interact, see selfdrive/service_list.yaml

User Data / chffr Account / Crash Reporting

By default, openpilot creates an account and includes a client for chffr, our dashcam app. We use your data to train better models and improve openpilot for everyone.

It's open source software, so you are free to disable it if you wish.

It logs the road facing camera, CAN, GPS, IMU, magnetometer, thermal sensors, crashes, and operating system logs. The user facing camera is only logged if you explicitly opt-in in settings. It does not log the microphone.

By using it, you agree to our privacy policy. You understand that use of this software or its related services will generate certain types of user data, which may be logged and stored at the sole discretion of comma.ai. By accepting this agreement, you grant an irrevocable, perpetual, worldwide right to comma.ai for the use of this data.

Testing on PC

There is rudimentary infrastructure to run a basic simulation and generate a report of openpilot's behavior in different scenarios.

# Requires working docker
./run_docker_tests.sh

The resulting plots are displayed in selfdrive/test/tests/plant/out/longitudinal/index.html

More extensive testing infrastructure and simulation environments are coming soon.

Contributing

We welcome both pull requests and issues on github. Bug fixes and new car ports encouraged.

Want to get paid to work on openpilot? comma.ai is hiring

Licensing

openpilot is released under the MIT license. Some parts of the software are released under other licenses as specified.

Any user of this software shall indemnify and hold harmless Comma.ai, Inc. and its directors, officers, employees, agents, stockholders, affiliates, subcontractors and customers from and against all allegations, claims, actions, suits, demands, damages, liabilities, obligations, losses, settlements, judgments, costs and expenses (including without limitation attorneys’ fees and costs) which arise out of, relate to or result from any use of this software by user.

THIS IS ALPHA QUALITY SOFTWARE FOR RESEARCH PURPOSES ONLY. THIS IS NOT A PRODUCT. YOU ARE RESPONSIBLE FOR COMPLYING WITH LOCAL LAWS AND REGULATIONS. NO WARRANTY EXPRESSED OR IMPLIED.


About

open source driving agent

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 41.5%
  • Python 33.6%
  • C++ 22.2%
  • Cap'n Proto 1.6%
  • Makefile 0.4%
  • Assembly 0.4%
  • Other 0.3%