- W5100S chip development platform for net'enabled microcotroller applications
- Ethernet (W5100S Hardwired TCP/IP chip) and 32-bit ARM® Cortex™-M3 based designs
- Arduino Pin-compatible platform hardware
For more details, please refer to W5100S-EVB page in WIZnet Docs page.
-
WIZnet W5100S Hardwired TCP/IP chip
- Hardwired TCP/IP embedded Ethernet controller
- Parallel Host Interface (External BUS Interface)
- SPI (Serial Peripheral Interface) Microcontroller Interface
- Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE protocols
- Easy to implement of the other network protocols
-
STMicroelectronics STM32F103VCT6 MCU
- 32-bit ARM® Cortex™-M3 microcontroller running at up to 72MHz
- 256kB on-chip flash / 48kB on-chip SRAM / Various peripherals
-
Pin-compatible with Arduino Shields designed for the UNO Rev3
-
2 x Push button switch(SW), 1 x RGB LED
-
1-Channel 10/100Mbps Ethernet Connector (RJ-45 with transformer) – (If you want to RJ-45, Contact us)
-
Micro USB B connector and 5-pin(2.54mm) Cortex debug connector for SWD(Serial Wire Debug)
These are libraries source code and example projects based on STM32CubeIDE If you want to base on TrueStudio or Ecplipse, change git branch master to truestudio_ver
- W5100S-EVB TrueStudio or Ecplipse Git W5100S-EVB TrueStudio or Ecplipse Git
The tree of Directory is below.
W5100S-EVB
┣ FSMC_DMA or SPI_DMA
┣ Core
┃ ┣ Inc
┃ ┃ ┗ main.h
┃ ┣ Src
┃ ┃ ┗ main.c
┃ ┗ Startup
┗ Drivers
┣ CMSIS
┣ STM32F1xx_HAL_Driver
┗ ioLibrary_Driver
┣ Application
┣ Ethernet
┗ Internet
- ioLibrary : Latest WIZnet chip drivers and protocol libraries for developers
Various materials are could be found at W5100S-EVB page in WIZnet Docs. And refer to this link W5100S Hardware data
- Documents
- Getting Started: Hello world! / Downloading a new program
- Make New W5100S-EVB Projects
- Technical Reference
- Datasheet
- Schematic
- Partlist
- Demension
- See also
- First release : May. 2018
- 0.0.0.2 : Dec. 2022