2021/6/9 - Update 17.0.2
*ROHM Sensor Shield
- Applicable Part Number: SensorShield-EVK-003 ROHM Sensor Shield include sensor
- KX224-I2C
- BM1383AGLV-I2C
- BM1422AGMV-I2C
- RPR0521RS-I2C
- BH1749NUC-I2C
- BH1790GLC-I2C
- KXTJ3_1057-I2C
- BM1390GLV-I2C
- BD7411G
- BD1020HFV
- Bluetooth Low Energy Chip nRF52832 Test Board
- nRF52DK
- Lapis - MK71521EK1A
- Change circuit
- nRF52DK
Change VDD circuit on SensorShield-EVK-003
remove Pull up resister(R10 and R11).
Connect VDD on nRF52DK and I2C power of the removed pull up resisiter(R10 and R11) SensorShield-EVK-003
-
MK71521EK1A
Cut SB_P26 and SB_P27.
- Other
-
Download SDK17.0.2 in nordicsemi.com
After updating all sensors, I plan to update in the next version.
https://www.nordicsemi.com/Products/Low-power-short-range-wireless/nRF52832/Download#infotabs
-
Create a ROHM_EVK_003 folder and git pull it in the created folder.
location : SDK17_directory\examples\ROHM_EVK_003\
-
Lapis - MK71521EK1A
Please perpare nRF52DK(Need SWD cable for connection) or J-Link debugger. MK71521EK1A is no built-in debugger.
-
Demo
iOS : Download nRFToolbox in Appstore Android : Download nRFToolbox in google play store or custom nRFToolbox in git
@KX224-I2C : Accelerometer - connect accel application in custom nRFToolbox.
@KXTJ3_1057-I2C : Accelerometer - connect accel application in custom nRFToolbox.
@BM1383AGLV : Air Press sensor - connect press application in custom nRFToolbox. If want to connect iOS, you can test HRS in nRFToolbox.
@BM1390GLV : Air Press sensor - connect press application in custom nRFToolbox. If want to connect iOS, you can test HRS in nRFToolbox.
@BM1422AGMV : Magnetometer - connect magneto application in custom nRFToolbox.
@RPR0521RS : Ambient light sensor and Proximity sensor - connect alsps application in custom nRFToolbox.
@BH1749NUC : Color sensor - connect color application in custom nRFToolbox.
@BH1790GLC : Heart Rate sensor - connect HRS application in anything nRFToolbox.
@BD1020HFV : Temperature sensor - connect HTS application in anything nRFToolbox.
@BD7411G : Hall sensor - need not application. When the magnet is brought close to the sensor, LED4 turn on or off.