driver_mpu9250

Overview

This package includes driver software for the InvenSense MPU9250 9DoF IMU.

Keywords: mpu9250 imu driver raspberry_pi

License

The source code is released under a MIT license.

Author: Paul D'Angio
Maintainer: Paul D'Angio, pcdangio@gmail.com

The driver_mpu9250 package has been tested under ROS Melodic and Ubuntu 18.04. This is research code, expect that it changes often and any fitness for a particular purpose is disclaimed.

Installation

Building from Source

Dependencies

• Robot Operating System (ROS) (middleware for robotics)
• sensor_msgs (ROS sensor_msgs)
• pigpio (Raspberry PI I/O)

Building

To build from source, clone the latest version from this repository into your catkin workspace and compile the package using

    cd catkin_workspace/src
    git clone https://github.com/pcdangio/ros-driver_mpu9250.git driver_mpu9250
    cd ../
    catkin_make

Usage

Run any of the driver nodes with (where xxx is the driver type):

    rosrun driver_mpu9250 xxx_node

For example, to run the node using a driver for a Raspberry Pi:

    rosrun driver_mpu9250 rpi_node

Nodes

rpi_node

A Raspberry Pi driver for MPU9250. Ensure that the pigpio daemon is running before starting this node.

Published Topics

• imu/imu (sensor_msgs/Imu) The acceleration and gyroscope measurements from the MPU9250.
• imu/magneto (sensor_msgs/MagneticField) The magnetic field measurements from the onboard AK8963 compass.
• imu/temperature (sensor_msgs/Temperature) The die temperature of the MPU9250 sensor.

Parameters

• ~/i2c_bus (int, default: 1)

    The I2C bus to communicate with the MPU9250 over.
  

• ~/i2c_address (int, default: 0x68)

    The I2C address of the MPU9250.
  

• ~/interrupt_gpio_pin (int, default: 0)

    The GPIO input pin connected to the MPU9250's interrupt pin.
  

• ~/gyro_dlpf_frequency (int, default: 0)

    An enum value representing the digital low pass filter (DLPF) cutoff frequency for the gyroscopes.
    NOTE: The publishing rate of Imu, MagneticField, and Temperature messages will be approximately 2.5x the gyro OR accel DLPF frequency (whichever is larger).
    Enumerated Values:
    250Hz = 0
    184Hz = 1
    92Hz = 2
    41Hz = 3
    20Hz = 4
    10Hz = 5
    5Hz = 6
  

• ~/accel_dlpf_frequency (int, default: 0)

    An enum value representing the digital low pass filter (DLPF) cutoff frequency for the accelerometers.
    NOTE: The publishing rate of Imu, MagneticField, and Temperature messages will be approximately 2.5x the gyro OR accel DLPF frequency (whichever is larger).
    Enumerated Values:
    460Hz = 0
    184Hz = 1
    92Hz = 2
    41Hz = 3
    20Hz = 4
    10Hz = 5
    5Hz = 6
  

• ~/gyro_fsr (int, default: 0)

    The full scale range (FSR) of the gyroscopes.
    Enumerated Values:
    +/- 250deg/sec = 0
    +/- 500deg/sec = 1
    +/- 1000deg/sec = 2
    +/- 2000deg/sec = 3
  

• ~/accel_fsr (int, default: 0)

    The full scale range (FSR) of the accelerometers.
    Enumerated Values:
    +/- 2g = 0
    +/- 4g = 1
    +/- 8g = 2
    +/- 16g = 3
  

Bugs & Feature Requests

Please report bugs and request features using the Issue Tracker.