AWS C S3

The AWS-C-S3 library is an asynchronous AWS S3 client focused on maximizing throughput and network utilization.

Key features:

• Automatic Request Splitting: Improves throughput by automatically splitting the request into part-sized chunks and performing parallel uploads/downloads of these chunks over multiple connections. There's a cap on the throughput of single S3 connection, the only way to go faster is multiple parallel connections.
• Automatic Retries: Increases resilience by retrying individual failed chunks of a file transfer, eliminating the need to restart transfers from scratch after an intermittent error.
• DNS Load Balancing: DNS resolver continuously harvests Amazon S3 IP addresses. When load is spread across the S3 fleet, overall throughput more reliable than if all connections are going to a single IP.
• Advanced Network Management: The client incorporates automatic request parallelization, effective timeouts and retries, and efficient connection reuse. This approach helps to maximize throughput and network utilization, and to avoid network overloads.
• Thread Pools and Async I/O: Avoids bottlenecks associated with single-thread processing.
• Parallel Reads: When uploading a large file from disk, reads from multiple parts of the file in parallel. This is faster than reading the file sequentially from beginning to end.

Documentation

• GetObject: A visual representation of the GetObject request flow.
• Memory Aware Requests Execution: An in-depth guide on optimizing memory usage during request executions.

License

This library is licensed under the Apache 2.0 License.

Usage

Building

CMake 3.9+ is required to build.

<install-path> must be an absolute path in the following instructions.

Linux-Only Dependencies

If you are building on Linux, you will need to build aws-lc and s2n-tls first.

git clone git@github.com:awslabs/aws-lc.git
cmake -S aws-lc -B aws-lc/build -DCMAKE_INSTALL_PREFIX=<install-path>
cmake --build aws-lc/build --target install

git clone git@github.com:aws/s2n-tls.git
cmake -S s2n-tls -B s2n-tls/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build s2n-tls/build --target install

Building aws-c-s3 and Remaining Dependencies

git clone git@github.com:awslabs/aws-c-common.git
cmake -S aws-c-common -B aws-c-common/build -DCMAKE_INSTALL_PREFIX=<install-path>
cmake --build aws-c-common/build --target install

git clone git@github.com:awslabs/aws-checksums.git
cmake -S aws-checksums -B aws-checksums/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-checksums/build --target install

git clone git@github.com:awslabs/aws-c-cal.git
cmake -S aws-c-cal -B aws-c-cal/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-c-cal/build --target install

git clone git@github.com:awslabs/aws-c-io.git
cmake -S aws-c-io -B aws-c-io/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-c-io/build --target install

git clone git@github.com:awslabs/aws-c-compression.git
cmake -S aws-c-compression -B aws-c-compression/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-c-compression/build --target install

git clone git@github.com:awslabs/aws-c-http.git
cmake -S aws-c-http -B aws-c-http/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-c-http/build --target install

git clone git@github.com:awslabs/aws-c-sdkutils.git
cmake -S aws-c-sdkutils -B aws-c-sdkutils/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-c-sdkutils/build --target install

git clone git@github.com:awslabs/aws-c-auth.git
cmake -S aws-c-auth -B aws-c-auth/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-c-auth/build --target install

git clone git@github.com:awslabs/aws-c-s3.git
cmake -S aws-c-s3 -B aws-c-s3/build -DCMAKE_INSTALL_PREFIX=<install-path> -DCMAKE_PREFIX_PATH=<install-path>
cmake --build aws-c-s3/build --target install

Running S3 sample

After installing all the dependencies, and building aws-c-s3, you can run the sample directly from the s3 build directory.

To download:

aws-c-s3/build/samples/s3/s3 cp s3://<bucket-name>/<object-name> <download-path> --region <region>

To upload:

aws-c-s3/build/samples/s3/s3 cp <upload-path> s3://<bucket-name>/<object-name> --region <region>

To list objects:

aws-c-s3/build/samples/s3/s3 ls s3://<bucket-name> --region <region>

Testing

The unit tests require an AWS account with S3 buckets set up in a particular way. Use the test_helper script to set this up.