Update README.md

README.md

@@ -1 +1,47 @@
-# STARK
+![Logo Image](http://i.imgur.com/Nryqfgk.pngg)
+##Source Audio Mixer and TTS
+
+STARK is an application that allows you to read commands from Source games and playback audio files, or use Text-to-Speech.
+This is a project that evolved from a proof-of-concept I made a while ago using AutoHotKey [link]().
+
+[![Donation Image](http://i.imgur.com/fbH2hRv.png)](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=LB5YVGD9F8U5L) if you want to or contribute to the project with code (see contributing section).
+
+###Dependencies
+* [Virtual Audio Cable](http://software.muzychenko.net/eng/vac.htm)
+
+###How to set up
+Either watch this video or follow the steps below.
+
+1. Download [STARK](http://google.com) and Virtual Audio Cable
+2. Install 32/64 bit version of Virtual Audio Cable according to your Windows version
+3. Open the x86/x64 folder from the installation folder of Virtual Audio Cable
+4. Open vcctlpan.exe as Administrator
+5. In the top-left corner change Cables to 2 and click set
+6. Close vcctlpan.exe
+7. Open Steam
+8. Go to Settings and select Voice
+9. Change your audio device to be Line 2
+10. Close Settings
+11. Open STARK
+12. Select the Setup tab
+13. Change the Microphone to your actual microphone
+14. Change the Standard Output to Line 1
+15. Change the Loopback Output to your Speakers/Headphones
+16. Choose the Watch Folder(the folder where it will look for audio files)
+17. Make sure it has found your SteamApps Folder (if it hasn't, make sure Steam is open)
+18. Make sure the game you want to play is selected
+19. Leave STARK open and go to the folder where you installed Virtual Audio Cable from
+20. Open the x86/x64 folder and open audiorepeater_ks.exe
+21. Set the Wave In to Line 1
+22. Set the Wave Out to Line 2
+23. Set the Total buffer to something around 20-80 ms (this value depends on your pc's specs, higher end pc-s can have lower values)
+24. Set the Parts to 4
+25. Click Start
+26. Open the game you selected in STARK
+27. Open the developer console and type: exec stark
+28. STARK should now be working and the list of commands you can use should be displayed in the console.
+
+###Contributing
+If you wish to contribute you can help me by either:
+* Committing more features/bugfixes/improvements
+* [Donating some cash to help feed my coffee addiction](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=LB5YVGD9F8U5L)