 |
 |
Prototype Capacitive Touch Dance Floor with Teensy and a pair of XBee Series 1s configured for I/O line passing.
- /Documentation - Fritzing circuit
- /Firmware - Example code
If you aren’t familiar with the following concepts, it is recommended to check out these tutorials.
- Teensy 3.2: Pinouts
- Getting Started with the Teensy
- Teensy XBee Adapter Hookup Guide
- Exploring XBees and XCTU
- Using OpenSegment: Counter/Analog Modes
- Transistors - Applications I: Switches
- How to Solder: Through-Hole Soldering
To add wireless I/O line passing, simply use a pair of XBee Series 1 radio each configured as a button and LED.
- 802.15.4 Digital Input w/ a Button: Configure the Radio
- 802.15.4 Digital Output w/ an LED: Configure the Radio
This project is open source!
Please review the LICENSE.md file for license information.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.