This repository contains the official ZMK configuration for the Wireless Corne SMT. This PCB is designed for a seamless, cable-free experience with full support for ZMK Studio.
- Product Page: Wireless Corne SMT PCB
- Full Documentation & Build Guide: Wireless SMT Corne Docs
- ZMK Studio Ready: Change your keymap in real-time without reflashing.
- Fully Wireless: No TRRS cable or USB connection required for standard use.
- Universal Support: Works with MX, Choc v1, and Choc v2 switches.
- Pre-Flashed: Ready to use out of the box.
The 8-pin header on each side (identical, not mirrored) is read from left to right. These are perfect for screens (nice!view / e-ink) or custom hardware.
| Pin | GPIO | Note |
|---|---|---|
| 1 | 0.07 | |
| 2 | 0.21 | |
| 3 | 0.12 | |
| 4 | 0.23 | |
| 5 | VCC | Switched via pin 0.31 |
| 6 | GND | |
| 7 | 0.19 | |
| 8 | 0.05 |
If shipping allows, batteries are included. The PCB features a micro JST connector (BM02B-ACHSS-GAN-ETF) and labeled solder pads (+/-) for custom installs.
Max Dimensions:
- Choc: 30x17x3mm
- MX: 30x17x6mm
- Modify: Fork this repo and edit your files in the
config/folder. - Build: GitHub Actions will automatically compile your firmware.
- Download: Grab the
firmware.uf2from the Actions tab. - Install: Connect the board via USB, double-tap the reset button, and drag the file onto the drive.